- Cores 8→12, add NUMA note for dual-socket E5-2660 v4
- Expand network table with VLAN Tag field and VirtIO note
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
VMs with a passed-through GPU need Graphic card set to 'none' —
VirtIO-GPU conflicts with the real card. VMs without GPU keep
default VirtIO for console access. Add this to VM 100 and VM 101
System tab tables with explanatory notes.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Coral handles Frigate detection; CPU decode is sufficient on dual Xeons.
GPU goes to VM 101 for Jellyfin/HandBrake/desktop use. Remove NVIDIA
driver install steps from Phase 12, renumber steps 12.2-12.14,
add notes on adding a second cheap GPU to VM 100 later if needed.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Recommend passing optical drives by port rather than vendor/device ID
due to re-enumeration during disc spin-up. Include lsusb -t discovery
and /dev/sr0 note for MakeMKV/HandBrake in VM 101.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Covers passing any USB device to a VM by vendor/device ID or by port,
via both web UI and CLI, with notes on plug-in requirements and config management.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Correct point release from 24.04.1 to 24.04.4 throughout.
VM 101 changed from Ubuntu Server to Ubuntu Desktop 24.04.4
for a full GUI workstation environment via noVNC/RDP.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Step 9.4 was telling users to fill in VM config placeholders before
VMs were created. Replace with a note to record by-id paths for use
in Phase 11 Step 11.6 where drives are actually assigned via qm set.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Replace all prose mentions of 'Quadro P2200' with generic GPU language.
Sample command output blocks left as-is (they're illustrative, not prescriptive).
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Initial structure for R730xd passthrough configuration:
- README with VM layout table and setup order
- docs/hardware-layout.md: bay/GPU/USB mapping worksheet
- scripts/perc-nonraid.sh: convert H730 drives to per-disk non-RAID mode
https://claude.ai/code/session_01TxTSnxDjgEVuNztdsWQjMD
Claude