Claude
876fd6553b
Adds an inbound concurrent-call cap mirroring the existing outbound one - outbound alone didn't protect against an inbound call-flood, which also costs money per-minute on VoIP.ms. Both defaults bumped from 3 to 10. Moves the cap numbers themselves out of static dialplan text and into a new pstn-limits.conf, read live via AST_CONFIG() the same way permission tiers already are - changing either cap takes effect on the next call, no Asterisk restart, no reinstall. "update in place" never touches this file, matching the existing protection for pstn-permissions.conf/.env/firewall/ Caddy config. Adds a concurrency-caps card to security-dashboard.sh's "PSTN Trunk" tab, above the existing permissions table, so both caps are visible and editable from the same web page. Tested against a real running instance of the Python app: default fallback when the file doesn't exist yet, save/persist, invalid-input rejection, and a bash-to-Python round trip on the generated file format. Inbound dialplan ordering mirrors outbound's existing pattern: permission check (is any ring-group member authorized for this caller) before the concurrency check, consistent with outbound's tier-check-then-busy-check order.
242 lines
15 KiB
Markdown
242 lines
15 KiB
Markdown
# PSTN Calling via VoIP.ms — Planning Notes
|
||
|
||
Research and decisions from a design discussion, saved here so the work can
|
||
be picked up in a fresh chat without re-deriving the background.
|
||
|
||
**Implemented** — see `services/pstn-trunk.sh` (run `sudo ./setup.sh
|
||
pstn-trunk` after `asterisk-digital-ocean` **or** `asterisk` (home/LAN) is
|
||
installed — both are supported, see the file for the static-IP caveat on the
|
||
LAN variant). Generic SIP trunk add-on that defaults to VoIP.ms but isn't
|
||
hardcoded to it — any provider supporting IP authentication works. Covers:
|
||
|
||
- IP-authenticated trunk, US/NANP-only outbound dialplan, no catch-all.
|
||
- **Two independent concurrent-call caps**, one per direction (default 10
|
||
outbound / 10 inbound — bumped up from an initial default of 3 once roles
|
||
existed to gate who can even reach the trunk; "ability creep is real," so
|
||
the two caps stay the hard backstop regardless). Global per direction, not
|
||
per-extension.
|
||
- **Three-tier per-extension permission model**: `internal` (default — no
|
||
PSTN at all, but can always call/receive other extensions and internal
|
||
ring groups), `restricted` (also only pre-approved US numbers, both
|
||
directions), `full` (also any US number). Internal extension-to-extension
|
||
dialing is *never* gated by any tier — deliberately, even though VoIP.ms
|
||
itself offers free SIP-to-SIP calling, to avoid routing purely-internal
|
||
calls through an extra external hop for no benefit.
|
||
- **Permissions AND concurrency caps are both live, not baked into the
|
||
dialplan.** Stored in `pstn-permissions.conf` / `pstn-limits.conf`, read
|
||
by the dialplan via Asterisk's `AST_CONFIG()` on every call — editing
|
||
either file takes effect on the next call, no restart, no reinstall.
|
||
`services/pstn-trunk.sh`'s "update in place" mode deliberately never
|
||
touches either (same protection this repo's update-mode convention
|
||
already gives `.env`/firewall/Caddy config
|
||
elsewhere) — only a "fresh" reinstall (with confirmation) or the web UI
|
||
below change it.
|
||
- A configurable **inbound ring-group** (one extension or several), each
|
||
member's live tier/approved-numbers checked per inbound call via an
|
||
unrolled per-member dialplan block (no AGI needed).
|
||
- **`services/security-dashboard.sh` integration** — a "PSTN Trunk" tab
|
||
shows both concurrency caps and every extension (parsed from
|
||
`pjsip.conf`) with its live tier and approved numbers, all editable with
|
||
no restart. This is what makes the tier model and caps actually
|
||
manageable day-to-day instead of needing a reinstall for every change.
|
||
- **ntfy alerts** on denied/rejected calls (immediate — permission denied,
|
||
number not approved, or either concurrency cap hit) and spend/volume
|
||
thresholds (hourly check: once/month on a spend threshold, every hour on
|
||
a call-burst threshold).
|
||
- Structural settings (server, DID, ring-group *membership*, ntfy,
|
||
rate/thresholds) persist to `.pstn-trunk.env` so "update in place"
|
||
reapplies them without re-prompting — the concurrency cap *numbers*
|
||
themselves are not structural, they live in `pstn-limits.conf` instead
|
||
(see above).
|
||
|
||
`services/pstn-trunk.sh`'s own header comment explains how the trunk/dialplan
|
||
config survives Easy Asterisk's regeneration, and why permissions are a
|
||
separate live file rather than baked in — both architectural wrinkles
|
||
discovered while implementing this, worth reading before touching either
|
||
file.
|
||
|
||
## Decision so far
|
||
- **Provider: VoIP.ms.** Chosen for its prepaid-balance model: turn off
|
||
auto-recharge in the account's Finances settings and outbound calls simply
|
||
fail once the balance hits $0 — that's the toll-fraud backstop if the
|
||
droplet's Asterisk (`asterisk-digital-ocean`) is ever compromised. This
|
||
behavior wasn't verified against a live account — confirm the
|
||
auto-recharge toggle still works this way at sign-up time, since billing
|
||
UX can change.
|
||
- **Scope: US calling only, for now.** No international, no premium-rate
|
||
destinations. Enforce this twice — once via whatever dial-plan/prefix
|
||
VoIP.ms requires for US routing, and again independently in Asterisk's own
|
||
dialplan (see below), so a compromised extension can't reach anything
|
||
outside the US even if the trunk itself would technically allow more later.
|
||
- **Inbound: wanted.** A DID is in scope, not outbound-only. Decide pay-per-minute
|
||
vs. unlimited DID plan based on expected inbound volume (see cost estimate
|
||
below), and decide E911 deliberately rather than skipping it by default —
|
||
VoIP.ms doesn't require it, but without it 911 dialed from the line either
|
||
fails or doesn't carry accurate address/location info.
|
||
|
||
## Cost estimate (100 min/month each direction, US-only)
|
||
|
||
Verified against VoIP.ms's public wiki/rate pages, not a live account — confirm
|
||
at sign-up since rates can change.
|
||
|
||
| Item | Rate | Monthly | Annual |
|
||
|---|---|---|---|
|
||
| DID (phone number), pay-per-minute plan | $0.85/mo flat | — | $10.20 |
|
||
| Inbound usage | $0.009/min | $0.90 | $10.80 |
|
||
| Outbound usage | $0.01/min | $1.00 | $12.00 |
|
||
| **Total** | | **~$2.75** | **~$33** |
|
||
|
||
- Skipping the DID (outbound-only) drops this to ~$12/year.
|
||
- Adding E911 adds a $1.50 one-time fee plus **$1.50/month** regulatory fee
|
||
(~$18/year) — pushes the total above to ~$51/year.
|
||
- **Funding minimum:** VoIP.ms requires a **$15 minimum deposit** to activate
|
||
calling — a one-time balance top-up, not a recurring charge. At ~$2.75/month
|
||
usage that balance lasts ~5 months before a refill is needed (longer at
|
||
lower volume). Leave auto-recharge **off** per the toll-fraud design above.
|
||
|
||
## Why this matters (toll fraud)
|
||
A compromised Asterisk box can dial premium-rate or international numbers
|
||
that cost real money fast (some destinations run several $/min) before
|
||
anyone notices. Two independent layers matter more than either alone:
|
||
1. **Trunk-side cap** — prepaid balance, auto-recharge off. Limits total
|
||
possible loss to whatever the balance is topped up to, but a live
|
||
compromise could still burn through that balance in minutes if nothing
|
||
else restricts what can be dialed.
|
||
2. **Dialplan-side restriction** — Asterisk should refuse to route calls
|
||
outside the US/NANP pattern at all, regardless of what the trunk allows.
|
||
This is the first line of defense and should exist independent of the
|
||
trunk's own capabilities.
|
||
|
||
**Important nuance: these two layers bound different things, and neither
|
||
alone bounds both.** NANP-only restriction bounds *cost-per-minute* (a
|
||
compromised box can only ever reach $0.01/min US numbers, never $2–5/min
|
||
international/premium destinations) — that risk is fully closed. It does
|
||
**not** bound *how fast* the prepaid balance gets burned: nothing stops a
|
||
compromised box from opening many concurrent US-destination calls in
|
||
parallel and draining the whole balance (e.g. $15 balance ÷ $0.01/min =
|
||
1,500 minutes total, which 20 concurrent legs could burn through in under
|
||
an hour). The prepaid-balance-off-auto-recharge layer bounds the *dollar*
|
||
ceiling; only a concurrent-call cap bounds the *speed* of a breach. Treat
|
||
the concurrent-call cap and spend/volume alert below as required before
|
||
funding a live trunk, not optional hardening.
|
||
|
||
**Implemented:** the concurrent-call caps in `services/pstn-trunk.sh` are
|
||
*global* per direction (default 10 outbound / 10 inbound, each tracked via
|
||
its own `GROUP()`/`GROUP_COUNT()` in the dialplan, shared across all
|
||
extensions) — not per-extension. Inbound didn't have a cap at all until
|
||
this was pointed out as a gap (outbound's cap doesn't protect against an
|
||
inbound call-flood, which also costs money per-minute on VoIP.ms) — both
|
||
directions are covered symmetrically now. The spend/volume alert is also
|
||
implemented: an hourly cron script reads a
|
||
call log the dialplan appends to directly (not Asterisk's CDR — see the
|
||
service file's own comments for why) and alerts via ntfy once per month when
|
||
estimated spend crosses a threshold, and every hour that call volume in the
|
||
last hour looks like a burst. Denied/rejected calls alert immediately,
|
||
separately from that hourly check.
|
||
|
||
## What it takes technically (asterisk-digital-ocean)
|
||
- A PJSIP trunk: `endpoint` / `aor` / `identify` sections in the pjsip
|
||
config. **Implemented with IP authentication** (no `auth` section, no SIP
|
||
password stored anywhere) — see `services/pstn-trunk.sh`. Provider name,
|
||
server hostname, and DID are all prompted at install time (VoIP.ms is only
|
||
the suggested default), so any provider supporting IP auth works.
|
||
- An outbound dialplan route matching US numbers only — **implemented**:
|
||
`_1NXXNXXXXX` (11-digit NANP with leading 1) and `_NXXNXXXXX` (10-digit,
|
||
auto-prefixed with 1), both routed to the trunk. No catch-all `_X.`
|
||
pattern.
|
||
- **Three-tier permission model — implemented**, superseding an earlier flat
|
||
allow-list design. `internal` / `restricted` / `full` per extension, read
|
||
live from `pstn-permissions.conf` via `AST_CONFIG()` rather than baked
|
||
into the dialplan text — no changes needed to Easy Asterisk's own
|
||
per-device pjsip.conf sections, since the gate lives entirely in files
|
||
this repo already owns. Internal extension-to-extension dialing is never
|
||
gated by any tier — only the two NANP patterns (outbound) and the
|
||
ring-group (inbound) are. Numbers are stored pipe-separated specifically
|
||
because they're used as a `REGEX()` alternation pattern in the dialplan —
|
||
see the security note below on why the untrusted call-time value must
|
||
never be interpolated into the *pattern* side of that check.
|
||
- **Inbound ring-group — implemented.** A space-separated list of
|
||
extensions to ring for inbound calls (one, or several for a ring group via
|
||
`Dial(PJSIP/a&PJSIP/b,20)`), prompted at install. Each member's tier is
|
||
checked live per inbound call (an unrolled dialplan block per member —
|
||
full always rings, restricted only rings if the caller's number is on
|
||
that member's approved list, internal never rings).
|
||
- **Security note on the REGEX() checks**: an inbound Caller-ID (or an
|
||
outbound dialed number) is attacker-influenced data and must never be
|
||
interpolated into the *pattern* argument of `REGEX()` — only ever the
|
||
string being tested. Doing it backwards would let a crafted Caller-ID
|
||
(e.g. containing regex metacharacters) forge a match against an unrelated
|
||
approved-numbers entry. Both checks in `services/pstn-trunk.sh` put the
|
||
admin-controlled approved-list in the pattern position and the live call
|
||
data in the tested-string position — worth keeping that direction if this
|
||
is ever refactored.
|
||
- **Web UI — implemented.** `services/security-dashboard.sh`'s "PSTN Trunk"
|
||
tab lists every extension (parsed from `pjsip.conf`, the same marker
|
||
format Easy Asterisk's own `rebuild_dialplan()` uses) with a tier dropdown
|
||
and approved-numbers field, saving straight to `pstn-permissions.conf`.
|
||
Tested end-to-end with a real running instance of the (stdlib-only)
|
||
Python app: extension parsing, tier changes, number normalization/
|
||
validation, and persistence all verified with actual HTTP requests against
|
||
a live server in a sandboxed test — not just read through.
|
||
- Provider-specific setup that isn't scriptable (user does this manually):
|
||
create the account, order a DID, decide pay-per-minute vs. unlimited DID
|
||
plan and whether to add E911, pick a server/POP, fund the prepaid balance
|
||
($15 minimum for VoIP.ms), turn off auto-recharge. `services/pstn-trunk.sh`
|
||
prompts for the server hostname, DID, allowed extensions, ring extensions,
|
||
both concurrency caps, ntfy topic, and spend-alert settings at install
|
||
time (the cap *numbers* are then live/web-editable afterward — see above).
|
||
- Defense-in-depth alongside the trunk:
|
||
- **Implemented:** independent outbound/inbound concurrent-call caps in
|
||
the dialplan (`GROUP()`/`GROUP_COUNT()`, default 10/10) so an
|
||
unauthorized or compromised extension can't open dozens of simultaneous
|
||
legs in either direction. Global per direction, not per-extension —
|
||
see the note above.
|
||
- **Implemented:** an outbound call-count/spend alert via ntfy — a
|
||
self-contained call log (not Asterisk's CDR) plus an hourly cron script.
|
||
Denied/rejected calls also alert immediately. See
|
||
`services/pstn-trunk.sh`'s "Spend/volume alerts" README section for the
|
||
exact mechanics and why CDR wasn't used.
|
||
- Worth being explicit that CrowdSec's existing `asterisk_bf` /
|
||
`asterisk_user_enum` scenarios (see `services/crowdsec.sh`) cover
|
||
registration brute-force, which is a *different* threat model from a
|
||
legitimately-registered extension being used for toll fraud — nobody
|
||
should assume CrowdSec alone already covers this.
|
||
|
||
## Provider landscape (for reference — not chosen)
|
||
- **SIP.US** — also prepaid, flat per-channel rate, built-in fraud
|
||
detection. Considered, not chosen.
|
||
- Several providers (Nextiva, IDT Express) advertise AI/ML-based fraud
|
||
monitoring as a second layer on top of normal billing — an extra net, not
|
||
a substitute for a hard prepaid ceiling.
|
||
- Most providers don't market an explicit "spending cap" feature — the
|
||
prepaid-balance + auto-recharge-off pattern is the de facto mechanism
|
||
across the space, VoIP.ms included.
|
||
|
||
## Open items for whoever picks this up next
|
||
1. ~~Decide: new `services/pstn-trunk.sh`...~~ Done — separate service file,
|
||
generalized to any IP-auth SIP provider (VoIP.ms is just the default).
|
||
2. ~~IP auth vs. registration~~ Done — IP authentication, no password stored.
|
||
3. ~~Exact NANP dial pattern(s)~~ Done — `_1NXXNXXXXX` / `_NXXNXXXXX`.
|
||
4. ~~Inbound~~ Done — rings a configurable list of extensions (ring-group
|
||
supported), each checked live per-call against its own tier. ~~Permission
|
||
model~~ Done — superseded the original flat allow-list with a 3-tier
|
||
model (internal/restricted/full) managed live via
|
||
`pstn-permissions.conf` + the Security Dashboard web UI, no reinstall
|
||
needed to change. ~~Generic Asterisk target~~ Done —
|
||
`services/pstn-trunk.sh` now supports either `asterisk-digital-ocean` or
|
||
the home/LAN `asterisk` install (the latter with a static-IP caveat for
|
||
the provider's IP authentication). Still unresolved: pick pay-per-minute
|
||
vs. unlimited DID plan on VoIP.ms's side based on real expected volume,
|
||
and decide on E911 (see cost estimate).
|
||
5. ~~Concurrent-call cap~~ Done — both directions now (inbound was a real
|
||
gap, since it also costs money per-minute and outbound's cap doesn't
|
||
cover it), default 10/10, global not per-extension, live-editable via
|
||
`pstn-limits.conf`/web UI. ~~Spend/volume alert~~ Done — ntfy, hourly
|
||
threshold + burst check, plus immediate alerts on denied/rejected calls.
|
||
6. Verify against a live VoIP.ms account: auto-recharge-off behavior at
|
||
sign-up, and that the chosen POP server's actual source IP for inbound
|
||
calls matches what `services/pstn-trunk.sh` resolved via DNS at install
|
||
time (VoIP.ms's docs mention some redundancy/failover between servers —
|
||
if inbound calls ever stop matching the `identify` section, this is the
|
||
first thing to check).
|