Claude
11a4e249b6
Same bug as the previous filebrowser/fmd fix: vaultwarden, immich, audiobookshelf, homebox, rustdesk, emby, meshcentral, traccar, lyrion, actualbudget, mealie, joplin, jellyfin, unifi, and ntfy all showed "Manage that install (update / full reinstall / cancel)" when re-run against an existing install, but choosing "1) Manage" fell straight through into the same unconditional fresh-install flow every time regardless of choice — no way to actually cancel or update in place. Wired all 15 up to prompt_reinstall_mode, matching the reference pattern in services/mattermost.sh: update pulls + restarts the existing container without touching config, cancel leaves the install untouched, fresh falls through to the existing full-install flow unchanged. Also add `setup.sh --status`: a plain-text listing of every service with its install state, using the exact same is_installed() calls the whiptail checklist's [installed] marker uses. Exists so "is X actually installed" can be answered by reading terminal output directly, without depending on a whiptail checklist screen where a narrow/resized terminal can truncate the "[installed]" suffix off-screen with no visible sign that happened.
448 lines
19 KiB
Bash
448 lines
19 KiB
Bash
#!/bin/bash
|
|
# services/unifi.sh — UniFi Network Application (Ubiquiti controller).
|
|
# Part of the modular post-install system (sourced by setup.sh).
|
|
#
|
|
# Can also be run standalone on any machine:
|
|
# sudo bash unifi.sh
|
|
# (Docker must already be installed when run standalone)
|
|
#
|
|
# Two containers: mongo:4 (DB) + linuxserver unifi-network-application (app).
|
|
# Web UI runs on HTTPS port 8443 — no plain HTTP web interface.
|
|
# Caddy reverse-proxy wiring uses TLS passthrough or tls_insecure_skip_verify.
|
|
|
|
# ── Standalone bootstrap ──────────────────────────────────────────────────────
|
|
# Detected when the script is executed directly rather than sourced by setup.sh.
|
|
# Sets up helpers and globals, then defers execution until after the function
|
|
# definition at the bottom of this file.
|
|
if [[ "${BASH_SOURCE[0]}" == "${0}" ]]; then
|
|
[[ "$(id -u)" == "0" ]] || { echo "Run with sudo: sudo bash $0"; exit 1; }
|
|
|
|
_SELF_DIR="$(cd "$(dirname "${BASH_SOURCE[0]}")" && pwd)"
|
|
_COMMON="$_SELF_DIR/../lib/common.sh"
|
|
|
|
if [[ -f "$_COMMON" ]]; then
|
|
# Full repo present — use the real helpers (picks up ~/docker/.config too)
|
|
# shellcheck source=../lib/common.sh
|
|
source "$_COMMON"
|
|
else
|
|
# One-off copy — inline minimal stubs so the script works without the repo
|
|
log_info() { echo -e "\033[0;34m[INFO]\033[0m $*"; }
|
|
log_success() { echo -e "\033[0;32m[OK]\033[0m $*"; }
|
|
log_warning() { echo -e "\033[1;33m[WARN]\033[0m $*"; }
|
|
log_error() { echo -e "\033[0;31m[ERROR]\033[0m $*" >&2; }
|
|
|
|
require_docker() {
|
|
command -v docker &>/dev/null || {
|
|
log_error "Docker not found. Install it first:"
|
|
log_error " curl -fsSL https://get.docker.com | sudo sh"
|
|
return 1
|
|
}
|
|
docker compose version &>/dev/null || {
|
|
log_error "Docker Compose plugin missing:"
|
|
log_error " sudo apt-get install -y docker-compose-plugin"
|
|
return 1
|
|
}
|
|
}
|
|
|
|
ensure_docker_dir_ownership() {
|
|
chown -R "$ACTUAL_USER:$ACTUAL_USER" "$@" 2>/dev/null || true
|
|
}
|
|
|
|
port_in_use() {
|
|
local _port="$1" _proto="${2:-tcp}"
|
|
local _flag="-tlnH"
|
|
[ "$_proto" = "udp" ] && _flag="-ulnH"
|
|
ss "$_flag" "sport = :${_port}" 2>/dev/null | grep -q .
|
|
}
|
|
|
|
find_free_port() {
|
|
local _varname="$1" _port="$2" _proto="${3:-tcp}"
|
|
while port_in_use "$_port" "$_proto"; do
|
|
_port=$((_port + 1))
|
|
done
|
|
eval "$_varname='$_port'"
|
|
}
|
|
|
|
generate_password() {
|
|
local _len="${1:-32}"
|
|
tr -dc 'A-Za-z0-9' < /dev/urandom | head -c "$_len"
|
|
echo
|
|
}
|
|
|
|
# Match common.sh's eval-based pattern so local vars in install_* are set correctly
|
|
prompt_text() {
|
|
local _q="$1" _def="$2" _var="$3" _r
|
|
[[ "${UNATTENDED:-false}" == "true" ]] && { eval "$_var='$_def'"; return; }
|
|
read -r -p " $_q " _r
|
|
eval "$_var='${_r:-$_def}'"
|
|
}
|
|
|
|
prompt_yn() {
|
|
local _q="$1" _def="$2" _var="$3" _r
|
|
[[ "${UNATTENDED:-false}" == "true" ]] && { eval "$_var='$_def'"; return; }
|
|
read -r -p " $_q " _r
|
|
eval "$_var='${_r:-$_def}'"
|
|
}
|
|
|
|
write_readme() {
|
|
local _dir="$1"; shift
|
|
mkdir -p "$_dir"
|
|
cat > "$_dir/README.md"
|
|
}
|
|
fi
|
|
|
|
# Globals — ACTUAL_USER/ACTUAL_HOME must come before DOCKER_DIR
|
|
# ($HOME under sudo is /root, not the real user's home)
|
|
ACTUAL_USER="${ACTUAL_USER:-${SUDO_USER:-$USER}}"
|
|
ACTUAL_HOME="$(getent passwd "$ACTUAL_USER" 2>/dev/null | cut -d: -f6 || echo "${HOME:-/root}")"
|
|
DOCKER_DIR="${DOCKER_DIR:-$ACTUAL_HOME/docker}"
|
|
DRY_RUN="${DRY_RUN:-false}"
|
|
UNATTENDED="${UNATTENDED:-false}"
|
|
SITE_TZ="${SITE_TZ:-$(cat /etc/timezone 2>/dev/null || echo UTC)}"
|
|
SITE_DOMAIN="${SITE_DOMAIN:-example.com}"
|
|
SITE_CADDY_NET="${SITE_CADDY_NET:-caddy_net}"
|
|
CADDY_REMOTE_HOST="${CADDY_REMOTE_HOST:-}"
|
|
|
|
register_service() { :; } # no-op — no wizard to register into
|
|
_RUN_STANDALONE=1
|
|
fi
|
|
# ─────────────────────────────────────────────────────────────────────────────
|
|
|
|
register_service unifi utilities "Ubiquiti network controller (UniFi)" 8443
|
|
|
|
install_unifi() {
|
|
require_docker || return 1
|
|
log_info "Installing UniFi Network Application..."
|
|
|
|
# ── Instance selection ───────────────────────────────────────────────────
|
|
# First instance keeps the plain "unifi-db"/"unifi-app" names/paths/ports
|
|
# exactly as before (zero behavior change for anyone with a single
|
|
# instance). Only asking to add a second one introduces suffixed naming —
|
|
# same pattern as services/mattermost.sh and services/wordpress.sh.
|
|
# Each instance gets its own dedicated MongoDB container (not shared) —
|
|
# see CLAUDE.md's "Multi-instance services" section for why: Kopia's
|
|
# generic backup stops the container to snapshot it, so a shared DB would
|
|
# back up/restore every instance's site data as one unit instead of
|
|
# per-instance. All 4 published ports move together per instance.
|
|
local UNIFI_DIR="$DOCKER_DIR/unifi"
|
|
local INSTANCE_SUFFIX="" PROJECT="unifi" DB_CONTAINER="unifi-db" APP_CONTAINER="unifi-app"
|
|
local WEB_PORT="8443" INFORM_PORT="8080" STUN_PORT="3478" DISCOVERY_PORT="10001"
|
|
|
|
if [ "$DRY_RUN" = true ]; then
|
|
echo "[DRY-RUN] Would offer to add a new, separate instance if one already exists"
|
|
echo "[DRY-RUN] Would create \$DOCKER_DIR/unifi(-<name>) (mongo_db_data/, unifi_data/)"
|
|
echo "[DRY-RUN] Would deploy mongo:4 + linuxserver/unifi-network-application:latest"
|
|
echo "[DRY-RUN] Ports: 8443 (HTTPS web UI), 8080 (device inform), 3478/udp (STUN), 10001/udp (discovery)"
|
|
echo "[DRY-RUN] — all 4 auto-scanned/shifted together for additional instances"
|
|
echo "[DRY-RUN] Would generate MongoDB credentials"
|
|
return 0
|
|
fi
|
|
|
|
if [ -d "$UNIFI_DIR" ]; then
|
|
echo ""
|
|
echo " UniFi is already installed at $UNIFI_DIR."
|
|
echo " 1) Manage that install (update / full reinstall / cancel)"
|
|
echo " 2) Add a NEW, separate UniFi controller instance alongside it (its own"
|
|
echo " database, sites, and ports — full isolation)"
|
|
echo ""
|
|
local _TOP_CHOICE=""
|
|
prompt_text " Choice [1/2]:" "1" _TOP_CHOICE
|
|
if [ "$_TOP_CHOICE" = "2" ]; then
|
|
local _suffix=""
|
|
while true; do
|
|
prompt_text " Short name for the new instance (letters/numbers/hyphens, e.g. 'guest-site'):" "" _suffix
|
|
_suffix="$(echo "$_suffix" | tr -cs 'a-zA-Z0-9-' '-' | sed 's/^-*//;s/-*$//')"
|
|
if [ -z "$_suffix" ]; then
|
|
log_warning "Name can't be empty."; continue
|
|
fi
|
|
if [ -d "$DOCKER_DIR/unifi-$_suffix" ]; then
|
|
log_warning "unifi-$_suffix already exists — pick another name."; continue
|
|
fi
|
|
break
|
|
done
|
|
INSTANCE_SUFFIX="$_suffix"
|
|
UNIFI_DIR="$DOCKER_DIR/unifi-$_suffix"
|
|
PROJECT="unifi-$_suffix"
|
|
DB_CONTAINER="unifi-db-$_suffix"
|
|
APP_CONTAINER="unifi-app-$_suffix"
|
|
log_info "New instance: $UNIFI_DIR"
|
|
else
|
|
# "Manage that install" on THIS instance — the banner above promises
|
|
# update/fresh/cancel, so actually offer it instead of falling straight
|
|
# through into the same unconditional-overwrite flow as a new install.
|
|
if [[ -f "$UNIFI_DIR/docker-compose.yml" ]]; then
|
|
local MODE=""
|
|
prompt_reinstall_mode MODE
|
|
case "$MODE" in
|
|
update)
|
|
log_info "Refreshing the UniFi image only — existing config, port, and Caddy setup are left as-is."
|
|
( cd "$UNIFI_DIR" && docker compose pull && docker compose up -d ) \
|
|
&& log_success "UniFi image refreshed" \
|
|
|| log_warning "Refresh failed — check: docker compose -f $UNIFI_DIR/docker-compose.yml logs"
|
|
return 0
|
|
;;
|
|
cancel)
|
|
log_info "Leaving the existing install as-is."
|
|
return 0
|
|
;;
|
|
fresh) ;; # fall through to the full install flow below
|
|
esac
|
|
fi
|
|
fi
|
|
fi
|
|
|
|
# Scan for free ports unconditionally, moving all 4 together — not just
|
|
# when adding an explicit additional instance. A plain first install can
|
|
# just as easily collide with an unrelated service that already claimed
|
|
# one of these default ports — see CLAUDE.md's "Port collision
|
|
# avoidance" section.
|
|
while port_in_use "$WEB_PORT" || port_in_use "$INFORM_PORT" \
|
|
|| port_in_use "$STUN_PORT" udp || port_in_use "$DISCOVERY_PORT" udp; do
|
|
WEB_PORT=$((WEB_PORT + 1))
|
|
INFORM_PORT=$((INFORM_PORT + 1))
|
|
STUN_PORT=$((STUN_PORT + 1))
|
|
DISCOVERY_PORT=$((DISCOVERY_PORT + 1))
|
|
done
|
|
|
|
mkdir -p "$UNIFI_DIR"
|
|
ensure_docker_dir_ownership "$UNIFI_DIR"
|
|
cd "$UNIFI_DIR" || return 1
|
|
|
|
local MONGO_PASS TZ_VAL UID_VAL GID_VAL
|
|
MONGO_PASS=$(generate_password 24)
|
|
TZ_VAL="${SITE_TZ:-$(cat /etc/timezone 2>/dev/null || echo UTC)}"
|
|
UID_VAL=$(id -u "$ACTUAL_USER")
|
|
GID_VAL=$(id -g "$ACTUAL_USER")
|
|
|
|
# Mirrors configure_caddy_for_service's own mode resolution (lib/common.sh):
|
|
# explicit CADDY_MODE from the site config wins, then a local ~/docker/caddy,
|
|
# then the legacy CADDY_REMOTE_HOST var. Only "local" joins caddy_net — a
|
|
# remote Caddy box can't resolve container names on this host's bridge
|
|
# network anyway; it reaches this service via the host's published port.
|
|
local _CADDY_MODE="${CADDY_MODE:-none}"
|
|
[ "$_CADDY_MODE" = "none" ] && [ -d "$DOCKER_DIR/caddy" ] && _CADDY_MODE="local"
|
|
[ "$_CADDY_MODE" = "none" ] && [ -n "${CADDY_REMOTE_HOST:-}" ] && _CADDY_MODE="remote"
|
|
|
|
local _CADDY_NET_BLOCK=""
|
|
local _CADDY_NET_SECTION=""
|
|
if [ "$_CADDY_MODE" = "local" ]; then
|
|
_CADDY_NET_BLOCK=" networks:
|
|
- caddy_net
|
|
"
|
|
_CADDY_NET_SECTION="
|
|
networks:
|
|
caddy_net:
|
|
external: true
|
|
name: ${SITE_CADDY_NET:-caddy_net}
|
|
"
|
|
fi
|
|
|
|
# Unquoted heredoc; ${...} used for caddy_net vars; all Docker Compose vars escaped with \$
|
|
cat > docker-compose.yml << UNIFI_COMPOSE
|
|
name: $PROJECT
|
|
|
|
services:
|
|
unifi-db:
|
|
image: mongo:4
|
|
container_name: $DB_CONTAINER
|
|
hostname: $DB_CONTAINER
|
|
restart: unless-stopped
|
|
env_file: .env
|
|
volumes:
|
|
- ./mongo_db_data:/data/db
|
|
expose:
|
|
- "27017"
|
|
configs:
|
|
- source: init-mongo.js
|
|
target: /docker-entrypoint-initdb.d/init-mongo.js
|
|
|
|
unifi-app:
|
|
image: lscr.io/linuxserver/unifi-network-application:latest
|
|
container_name: $APP_CONTAINER
|
|
hostname: $APP_CONTAINER
|
|
restart: unless-stopped
|
|
env_file: .env
|
|
depends_on:
|
|
- unifi-db
|
|
volumes:
|
|
- ./unifi_data:/config
|
|
ports:
|
|
- "${WEB_PORT}:8443"
|
|
- "${INFORM_PORT}:8080"
|
|
- "${STUN_PORT}:3478/udp"
|
|
- "${DISCOVERY_PORT}:10001/udp"
|
|
# Optional — uncomment as needed:
|
|
# - "1900:1900/udp" # L2 discovery (may conflict with UPnP)
|
|
# - "8843:8843" # guest portal HTTPS
|
|
# - "8880:8880" # guest portal HTTP
|
|
# - "6789:6789" # mobile speed test
|
|
# - "5514:5514/udp" # remote syslog
|
|
${_CADDY_NET_BLOCK}${_CADDY_NET_SECTION}
|
|
# Inline MongoDB init — Docker Compose interpolates vars from .env at startup.
|
|
configs:
|
|
init-mongo.js:
|
|
content: |
|
|
db.getSiblingDB("\${MONGO_DBNAME}").createUser({user: "\${MONGO_USER}", pwd: "\${MONGO_PASS}", roles: [{role: "\${MONGO_ROLE}", db: "\${MONGO_DBNAME}"}]});
|
|
db.getSiblingDB("\${MONGO_DBNAME}_stat").createUser({user: "\${MONGO_USER}", pwd: "\${MONGO_PASS}", roles: [{role: "\${MONGO_ROLE}", db: "\${MONGO_DBNAME}_stat"}]});
|
|
UNIFI_COMPOSE
|
|
|
|
cat > .env << UNIFI_ENV
|
|
# ── General ───────────────────────────────────────────────────────────────────
|
|
TZ=$TZ_VAL
|
|
CADDY_NET=$SITE_CADDY_NET
|
|
|
|
# ── LinuxServer — UniFi app ───────────────────────────────────────────────────
|
|
PUID=$UID_VAL
|
|
PGID=$GID_VAL
|
|
MEM_LIMIT=1024
|
|
MEM_STARTUP=512
|
|
|
|
# ── MongoDB connection ────────────────────────────────────────────────────────
|
|
MONGO_USER=unifi
|
|
MONGO_PASS=$MONGO_PASS
|
|
MONGO_HOST=unifi-db
|
|
MONGO_PORT=27017
|
|
MONGO_DBNAME=unifi_db
|
|
MONGO_ROLE=dbOwner
|
|
# MONGO_TLS= # optional
|
|
# MONGO_AUTHSOURCE= # optional
|
|
UNIFI_ENV
|
|
|
|
chmod 600 .env
|
|
mkdir -p mongo_db_data unifi_data
|
|
ensure_docker_dir_ownership "$UNIFI_DIR"
|
|
|
|
log_success "UniFi${INSTANCE_SUFFIX:+ ($INSTANCE_SUFFIX)} configured at $UNIFI_DIR (web port $WEB_PORT)"
|
|
|
|
# ── Optional Caddy reverse proxy (HTTPS backend requires tls_insecure_skip_verify) ──
|
|
local _caddy_mode="none"
|
|
[ -d "$DOCKER_DIR/caddy" ] && _caddy_mode="local"
|
|
[ -n "${CADDY_REMOTE_HOST:-}" ] && [ "$_caddy_mode" != "local" ] && _caddy_mode="remote"
|
|
|
|
if [ "$_caddy_mode" != "none" ]; then
|
|
echo ""
|
|
echo " UniFi web UI is HTTPS-only (self-signed cert internally)."
|
|
echo " Caddy proxies it using tls_insecure_skip_verify."
|
|
if [ "$_caddy_mode" = "remote" ]; then
|
|
echo " Remote Caddy (${CADDY_REMOTE_HOST}) — a snippet file will be saved."
|
|
fi
|
|
echo ""
|
|
local CADDY_UNIFI=""
|
|
prompt_yn "Configure Caddy reverse proxy for UniFi${INSTANCE_SUFFIX:+ ($INSTANCE_SUFFIX)}? (y/n):" "n" CADDY_UNIFI
|
|
if [ "$CADDY_UNIFI" = "y" ] || [ "$CADDY_UNIFI" = "Y" ]; then
|
|
local UNIFI_DOMAIN=""
|
|
local _def_domain="unifi${INSTANCE_SUFFIX:+-$INSTANCE_SUFFIX}.${SITE_DOMAIN:-example.com}"
|
|
prompt_text "UniFi domain [${_def_domain}]:" "$_def_domain" UNIFI_DOMAIN
|
|
if [ -n "$UNIFI_DOMAIN" ]; then
|
|
# UniFi uses HTTPS internally — upstream must use https:// + skip verify.
|
|
# Local mode reaches the container over Docker networking (internal port
|
|
# never changes); remote mode reaches this host's published port, which
|
|
# is WEB_PORT (auto-scanned for additional instances).
|
|
local _upstream="https://${APP_CONTAINER}:8443"
|
|
[ "$_caddy_mode" = "remote" ] && _upstream="https://${CADDY_REMOTE_HOST}:${WEB_PORT}"
|
|
|
|
local _site_block
|
|
_site_block="$(cat << CBLOCK
|
|
|
|
# UniFi Network Application
|
|
${UNIFI_DOMAIN} {
|
|
reverse_proxy ${_upstream} {
|
|
transport http {
|
|
tls_insecure_skip_verify
|
|
}
|
|
}
|
|
|
|
header {
|
|
Strict-Transport-Security "max-age=31536000; includeSubDomains; preload"
|
|
X-Content-Type-Options "nosniff"
|
|
X-Frame-Options "SAMEORIGIN"
|
|
Referrer-Policy "strict-origin-when-cross-origin"
|
|
}
|
|
|
|
log {
|
|
output file /var/log/caddy/${UNIFI_DOMAIN}.log
|
|
format json
|
|
}
|
|
}
|
|
CBLOCK
|
|
)"
|
|
if [ "$_caddy_mode" = "local" ]; then
|
|
local CADDYFILE="$DOCKER_DIR/caddy/Caddyfile"
|
|
cp "$CADDYFILE" "$CADDYFILE.backup.$(date +%Y%m%d-%H%M%S)" 2>/dev/null || true
|
|
printf '%s\n' "$_site_block" >> "$CADDYFILE"
|
|
docker exec caddy caddy fmt --overwrite /etc/caddy/Caddyfile 2>/dev/null || true
|
|
docker exec caddy caddy reload --config /etc/caddy/Caddyfile 2>/dev/null \
|
|
&& log_success "Caddy configured for $UNIFI_DOMAIN" \
|
|
|| log_warning "Caddy reload failed — check: docker logs caddy"
|
|
else
|
|
local _snippet_dir="$DOCKER_DIR/caddy-snippets"
|
|
local _snippet_file="$_snippet_dir/unifi${INSTANCE_SUFFIX:+-$INSTANCE_SUFFIX}.caddy"
|
|
mkdir -p "$_snippet_dir"
|
|
printf '%s\n' "$_site_block" > "$_snippet_file"
|
|
chown "$ACTUAL_USER:$ACTUAL_USER" "$_snippet_file" 2>/dev/null || true
|
|
log_success "Snippet saved: $_snippet_file"
|
|
log_info "Copy to Caddy machine:"
|
|
log_info " scp $_snippet_file caddy-host:~/caddy-snippets/"
|
|
fi
|
|
fi
|
|
fi
|
|
fi
|
|
|
|
write_readme "$UNIFI_DIR" << MD
|
|
# UniFi Network Application${INSTANCE_SUFFIX:+ — $INSTANCE_SUFFIX}
|
|
|
|
Ubiquiti network controller. Manages UniFi APs, switches, and gateways.
|
|
$( [ -n "$INSTANCE_SUFFIX" ] && echo "
|
|
This is a separate, fully isolated instance (own dedicated database, own
|
|
sites/devices, own ports) — not shared adoption with another UniFi instance.
|
|
Devices can only be adopted by one controller at a time.")
|
|
|
|
## Access
|
|
- Web UI: **https://localhost:${WEB_PORT}** (HTTPS, self-signed cert — accept the warning)
|
|
- First run: complete the setup wizard and adopt your devices.
|
|
|
|
## Device adoption
|
|
Make sure devices can reach **http://<server-ip>:${INFORM_PORT}/inform** as the inform URL.
|
|
In the controller: Settings → System → Application Configuration → Override inform host.
|
|
|
|
## Ports
|
|
| Port | Protocol | Purpose |
|
|
|------|----------|---------|
|
|
| ${WEB_PORT} | TCP | HTTPS web UI |
|
|
| ${INFORM_PORT} | TCP | Device inform / HTTP redirect |
|
|
| ${STUN_PORT} | UDP | STUN |
|
|
| ${DISCOVERY_PORT} | UDP | AP discovery |
|
|
|
|
## Manage
|
|
\`\`\`bash
|
|
cd $UNIFI_DIR
|
|
docker compose up -d # start
|
|
docker compose down # stop
|
|
docker compose logs -f # logs
|
|
docker compose pull && docker compose up -d # update (wait for DB first)
|
|
\`\`\`
|
|
|
|
## Migration from old UniFi Controller
|
|
1. Backup: Settings → System → Backup → Create Backup
|
|
2. Down the old container
|
|
3. Spin up this stack
|
|
4. Restore: Settings → System → Backup → Restore
|
|
MD
|
|
|
|
local START_UNIFI=""
|
|
prompt_yn "Start UniFi${INSTANCE_SUFFIX:+ ($INSTANCE_SUFFIX)} now? (y/n):" "y" START_UNIFI
|
|
if [ "$START_UNIFI" = "y" ] || [ "$START_UNIFI" = "Y" ]; then
|
|
docker compose up -d \
|
|
&& log_success "UniFi${INSTANCE_SUFFIX:+ ($INSTANCE_SUFFIX)} started (first startup takes ~60 s while DB initializes)" \
|
|
|| log_warning "Failed to start — check: docker compose logs"
|
|
fi
|
|
|
|
echo ""
|
|
echo " Web UI: https://localhost:${WEB_PORT} (accept the self-signed cert warning)"
|
|
echo " MongoDB credentials saved to: $UNIFI_DIR/.env"
|
|
echo ""
|
|
}
|
|
|
|
# Run immediately when executed directly (deferred until after function definition)
|
|
[[ "${_RUN_STANDALONE:-0}" == 1 ]] && install_unifi
|