Claude
28252b97d3
host naming, and chain-in from filebrowser/audiobookshelf/emby Reported live: "mount error(79): Can not access a needed shared library" on the local CIFS mount step. That message is misleadingly worded — errno 79 is ENOKEY, not a real missing-library problem, and a plain `guest` mount with no explicit `sec=` hitting it against a real Samba server is a known cifs-utils/kernel-cifs rough edge in the anonymous-session keyring path. Fixed as a side effect of switching away from guest access per direct request (real per-share Samba accounts, not root/guest, matching "user accounts for data directories"): each mount now gets a dedicated Samba account (reusing the SSH username — that Unix account already exists on the home box) with a generated password, remotely provisioned via smbpasswd over the same SSH trust, and mounted locally via a root-only credentials file (same convention tools/mount-network-drive.sh already uses) plus an explicit sec=ntlmssp instead of guest. Host naming: entering a raw IP now offers to name it in /etc/hosts, then uses that name for everything from then on (SSH commands, the CIFS mount address, and re-runs against the same IP). Deliberately /etc/hosts, not ~/.ssh/config — an SSH Host alias only helps the `ssh` command resolve a name, mount.cifs never consults ~/.ssh/config at all, so an alias alone wouldn't get the actual mount using a name. Still offers to also add a matching SSH Host alias on top (pure convenience — skips typing the username for interactive ssh use) when services/ssh-config.sh's helpers are available. Chain-in: filebrowser/audiobookshelf/emby now offer to run vpn-data-mount first if their data is on a home box that isn't mounted yet, and default their own directory prompt to whatever was just mounted (VDM_LAST_MOUNT_POINT, explicitly unset before each chain call so an unrelated earlier vpn-data-mount run in the same setup.sh session can't leak its mount point in as a stale default).
457 lines
19 KiB
Bash
457 lines
19 KiB
Bash
#!/bin/bash
|
|
# services/emby.sh — Media server for movies, TV, and music (Emby).
|
|
# Part of the modular post-install system (sourced by setup.sh).
|
|
#
|
|
# Can also be run standalone on any machine:
|
|
# sudo bash emby.sh
|
|
# (Docker must already be installed when run standalone)
|
|
#
|
|
# Ported from ubuntu-post-install-24.04-crowdsec.sh (# ---- EMBY ----).
|
|
# Own ~/docker/emby/ with a standalone docker-compose.yml + .env. Hardware
|
|
# transcoding is left commented in the compose (uncomment the /dev/dri block
|
|
# once you've confirmed your GPU) to match the original behavior.
|
|
|
|
# ── Standalone bootstrap ──────────────────────────────────────────────────────
|
|
# Detected when the script is executed directly rather than sourced by setup.sh.
|
|
# Sets up helpers and globals, then defers execution until after the function
|
|
# definition at the bottom of this file.
|
|
if [[ "${BASH_SOURCE[0]}" == "${0}" ]]; then
|
|
[[ "$(id -u)" == "0" ]] || { echo "Run with sudo: sudo bash $0"; exit 1; }
|
|
|
|
_SELF_DIR="$(cd "$(dirname "${BASH_SOURCE[0]}")" && pwd)"
|
|
_COMMON="$_SELF_DIR/../lib/common.sh"
|
|
|
|
if [[ -f "$_COMMON" ]]; then
|
|
# Full repo present — use the real helpers (picks up ~/docker/.config too)
|
|
# shellcheck source=../lib/common.sh
|
|
source "$_COMMON"
|
|
else
|
|
# One-off copy — inline minimal stubs so the script works without the repo
|
|
log_info() { echo -e "\033[0;34m[INFO]\033[0m $*"; }
|
|
log_success() { echo -e "\033[0;32m[OK]\033[0m $*"; }
|
|
log_warning() { echo -e "\033[1;33m[WARN]\033[0m $*"; }
|
|
log_error() { echo -e "\033[0;31m[ERROR]\033[0m $*" >&2; }
|
|
|
|
require_docker() {
|
|
command -v docker &>/dev/null || {
|
|
log_error "Docker not found. Install it first:"
|
|
log_error " curl -fsSL https://get.docker.com | sudo sh"
|
|
return 1
|
|
}
|
|
docker compose version &>/dev/null || {
|
|
log_error "Docker Compose plugin missing:"
|
|
log_error " sudo apt-get install -y docker-compose-plugin"
|
|
return 1
|
|
}
|
|
}
|
|
|
|
ensure_docker_dir_ownership() {
|
|
chown -R "$ACTUAL_USER:$ACTUAL_USER" "$@" 2>/dev/null || true
|
|
}
|
|
|
|
port_in_use() {
|
|
local _port="$1" _proto="${2:-tcp}"
|
|
local _flag="-tlnH"
|
|
[ "$_proto" = "udp" ] && _flag="-ulnH"
|
|
ss "$_flag" "sport = :${_port}" 2>/dev/null | grep -q .
|
|
}
|
|
|
|
find_free_port() {
|
|
local _varname="$1" _port="$2" _proto="${3:-tcp}"
|
|
while port_in_use "$_port" "$_proto"; do
|
|
_port=$((_port + 1))
|
|
done
|
|
eval "$_varname='$_port'"
|
|
}
|
|
|
|
# Match common.sh's eval-based pattern so local vars in install_* are set correctly
|
|
prompt_text() {
|
|
local _q="$1" _def="$2" _var="$3" _r
|
|
[[ "${UNATTENDED:-false}" == "true" ]] && { eval "$_var='$_def'"; return; }
|
|
read -r -p " $_q " _r
|
|
eval "$_var='${_r:-$_def}'"
|
|
}
|
|
|
|
prompt_yn() {
|
|
local _q="$1" _def="$2" _var="$3" _r
|
|
[[ "${UNATTENDED:-false}" == "true" ]] && { eval "$_var='$_def'"; return; }
|
|
read -r -p " $_q " _r
|
|
eval "$_var='${_r:-$_def}'"
|
|
}
|
|
|
|
configure_caddy_for_service() {
|
|
local _name="$1" _upstream="$2" _subdomain="$3" _extra="${4:-}"
|
|
local _caddy_dir="$DOCKER_DIR/caddy"
|
|
local _caddyfile="$_caddy_dir/Caddyfile"
|
|
local _display_port="${_upstream##*:}"
|
|
|
|
# Determine mode: local Caddy, remote Caddy, or none
|
|
local _mode="none"
|
|
[[ -d "$_caddy_dir" ]] && _mode="local"
|
|
[[ -n "${CADDY_REMOTE_HOST:-}" ]] && [[ "$_mode" != "local" ]] && _mode="remote"
|
|
[[ "$_mode" == "none" ]] && {
|
|
log_info "Access $_name directly on port $_display_port."
|
|
return 0
|
|
}
|
|
|
|
echo ""
|
|
local _do_caddy=""
|
|
if [[ "$_mode" == "remote" ]]; then
|
|
log_info "Remote Caddy configured (${CADDY_REMOTE_HOST})."
|
|
log_info "A snippet file will be saved to ~/docker/caddy-snippets/."
|
|
fi
|
|
read -r -p " Configure Caddy reverse proxy for $_name? [y/N]: " _do_caddy
|
|
[[ "${_do_caddy,,}" == "y" ]] || {
|
|
log_info "Skipping — access at: http://localhost:$_display_port"
|
|
return 0
|
|
}
|
|
|
|
# Domain prompt — pre-fill from SITE_DOMAIN when available
|
|
local _default_domain=""
|
|
if [[ -n "${SITE_DOMAIN:-}" ]] && [[ "$SITE_DOMAIN" != "example.com" ]]; then
|
|
_default_domain="${_subdomain}.${SITE_DOMAIN}"
|
|
log_info "Default: $_default_domain"
|
|
fi
|
|
local _domain=""
|
|
read -r -p " Domain [${_default_domain:-required}]: " _domain
|
|
_domain="${_domain:-$_default_domain}"
|
|
[[ -n "$_domain" ]] || { log_warning "No domain entered — skipping Caddy."; return 0; }
|
|
|
|
# Build upstream — remote Caddy uses host IP:port, not container name
|
|
local _block_upstream="$_upstream"
|
|
if [[ "$_mode" == "remote" ]]; then
|
|
_block_upstream="${CADDY_REMOTE_HOST}:${_display_port}"
|
|
fi
|
|
|
|
local _site_block
|
|
_site_block="$(cat << CBLOCK
|
|
|
|
# $_name
|
|
${_domain} {
|
|
reverse_proxy ${_block_upstream}
|
|
|
|
header {
|
|
Strict-Transport-Security "max-age=31536000; includeSubDomains; preload"
|
|
X-Content-Type-Options "nosniff"
|
|
X-Frame-Options "SAMEORIGIN"
|
|
Referrer-Policy "strict-origin-when-cross-origin"
|
|
}
|
|
|
|
log {
|
|
output file /var/log/caddy/${_domain}.log
|
|
format json
|
|
}
|
|
${_extra}
|
|
}
|
|
CBLOCK
|
|
)"
|
|
|
|
if [[ "$_mode" == "local" ]]; then
|
|
if [[ -f "$_caddyfile" ]]; then
|
|
local _bk="$_caddy_dir/Caddyfile.backup.$(date +%Y%m%d-%H%M%S)"
|
|
cp "$_caddyfile" "$_bk"
|
|
log_info "Backed up Caddyfile to $(basename "$_bk")"
|
|
else
|
|
touch "$_caddyfile"
|
|
fi
|
|
|
|
if grep -q "^${_domain}" "$_caddyfile" 2>/dev/null; then
|
|
log_warning "$_domain already in Caddyfile"
|
|
local _ow=""
|
|
read -r -p " Overwrite? [y/N]: " _ow
|
|
[[ "${_ow,,}" == "y" ]] || { log_info "Keeping existing entry."; return 0; }
|
|
sed -i "/^${_domain}/,/^}/d" "$_caddyfile"
|
|
fi
|
|
|
|
printf '%s\n' "$_site_block" >> "$_caddyfile"
|
|
log_success "Added $_domain to Caddyfile"
|
|
docker exec caddy caddy fmt --overwrite /etc/caddy/Caddyfile 2>/dev/null || true
|
|
if docker exec caddy caddy reload --config /etc/caddy/Caddyfile 2>/dev/null; then
|
|
log_success "$_name accessible at: https://$_domain"
|
|
else
|
|
log_warning "Reload failed — check: docker logs caddy"
|
|
log_info "Manual reload: docker exec caddy caddy reload --config /etc/caddy/Caddyfile"
|
|
fi
|
|
else
|
|
local _snippet_dir="$DOCKER_DIR/caddy-snippets"
|
|
local _snippet_file="$_snippet_dir/${_subdomain}.caddy"
|
|
mkdir -p "$_snippet_dir"
|
|
printf '%s\n' "$_site_block" > "$_snippet_file"
|
|
chown "$ACTUAL_USER:$ACTUAL_USER" "$_snippet_file" 2>/dev/null || true
|
|
log_success "Snippet saved: $_snippet_file"
|
|
log_info "Copy to Caddy machine:"
|
|
log_info " scp $_snippet_file caddy-host:~/caddy-snippets/"
|
|
log_info " rsync -av $_snippet_dir/ caddy-host:~/caddy-snippets/ (all at once)"
|
|
fi
|
|
}
|
|
write_readme() {
|
|
local _dir="$1"; shift
|
|
mkdir -p "$_dir"
|
|
cat > "$_dir/README.md"
|
|
}
|
|
fi
|
|
|
|
# Globals — ACTUAL_USER/ACTUAL_HOME must come before DOCKER_DIR
|
|
# ($HOME under sudo is /root, not the real user's home)
|
|
ACTUAL_USER="${ACTUAL_USER:-${SUDO_USER:-$USER}}"
|
|
ACTUAL_HOME="$(getent passwd "$ACTUAL_USER" 2>/dev/null | cut -d: -f6 || echo "${HOME:-/root}")"
|
|
DOCKER_DIR="${DOCKER_DIR:-$ACTUAL_HOME/docker}"
|
|
DRY_RUN="${DRY_RUN:-false}"
|
|
UNATTENDED="${UNATTENDED:-false}"
|
|
SITE_TZ="${SITE_TZ:-$(cat /etc/timezone 2>/dev/null || echo UTC)}"
|
|
SITE_DOMAIN="${SITE_DOMAIN:-example.com}"
|
|
SITE_CADDY_NET="${SITE_CADDY_NET:-caddy_net}"
|
|
|
|
register_service() { :; } # no-op — no wizard to register into
|
|
_RUN_STANDALONE=1
|
|
fi
|
|
# ─────────────────────────────────────────────────────────────────────────────
|
|
|
|
register_service emby media "Media server — movies, TV, music (Emby); supports a music-only setup with per-user library access" 8096
|
|
|
|
install_emby() {
|
|
require_docker || return 1
|
|
|
|
# ── Instance selection ───────────────────────────────────────────────────
|
|
# First instance keeps the plain "emby" name/paths/ports exactly as
|
|
# before (zero behavior change for anyone with a single instance). Only
|
|
# asking to add a second one introduces suffixed naming — same pattern as
|
|
# services/mattermost.sh and services/wordpress.sh.
|
|
local EMBY_DIR="$DOCKER_DIR/emby"
|
|
local INSTANCE_SUFFIX="" CONTAINER="emby"
|
|
local WEB_PORT="8096" HTTPS_PORT="8920"
|
|
local DEFAULT_MEDIA="$ACTUAL_HOME/media"
|
|
|
|
if [ "$DRY_RUN" = true ]; then
|
|
echo "[DRY-RUN] Emby would:"
|
|
echo " - Offer to add a new, separate instance if one already exists"
|
|
echo " - Ask whether this is a music-only setup (changes the default folder/guidance only —"
|
|
echo " which library types you add still happens in Emby's own web setup wizard)"
|
|
echo " - Create \$DOCKER_DIR/emby(-<name>) with docker-compose.yml + .env (config/)"
|
|
echo " - Mount a media folder (default $DEFAULT_MEDIA) at /media"
|
|
echo " - Run as UID/GID $(id -u "$ACTUAL_USER")/$(id -g "$ACTUAL_USER")"
|
|
echo " - Auto-scan for free host ports if this is an additional instance"
|
|
echo " - Offer a Caddy reverse proxy and to start the container"
|
|
return 0
|
|
fi
|
|
|
|
if [ -d "$EMBY_DIR" ]; then
|
|
echo ""
|
|
echo " Emby is already installed at $EMBY_DIR."
|
|
echo " 1) Manage that install (update / full reinstall / cancel)"
|
|
echo " 2) Add a NEW, separate Emby instance alongside it (its own server,"
|
|
echo " library, and ports — full isolation, not another Emby library)"
|
|
echo ""
|
|
local _TOP_CHOICE=""
|
|
prompt_text " Choice [1/2]:" "1" _TOP_CHOICE
|
|
if [ "$_TOP_CHOICE" = "2" ]; then
|
|
local _suffix=""
|
|
while true; do
|
|
prompt_text " Short name for the new instance (letters/numbers/hyphens, e.g. 'music'):" "" _suffix
|
|
_suffix="$(echo "$_suffix" | tr -cs 'a-zA-Z0-9-' '-' | sed 's/^-*//;s/-*$//')"
|
|
if [ -z "$_suffix" ]; then
|
|
log_warning "Name can't be empty."; continue
|
|
fi
|
|
if [ -d "$DOCKER_DIR/emby-$_suffix" ]; then
|
|
log_warning "emby-$_suffix already exists — pick another name."; continue
|
|
fi
|
|
break
|
|
done
|
|
INSTANCE_SUFFIX="$_suffix"
|
|
EMBY_DIR="$DOCKER_DIR/emby-$_suffix"
|
|
CONTAINER="emby-$_suffix"
|
|
DEFAULT_MEDIA="$ACTUAL_HOME/media-$_suffix"
|
|
log_info "New instance: $EMBY_DIR"
|
|
else
|
|
# "Manage that install" on THIS instance — the banner above promises
|
|
# update/fresh/cancel, so actually offer it instead of falling straight
|
|
# through into the same unconditional-overwrite flow as a new install.
|
|
if [[ -f "$EMBY_DIR/docker-compose.yml" ]]; then
|
|
local MODE=""
|
|
prompt_reinstall_mode MODE
|
|
case "$MODE" in
|
|
update)
|
|
log_info "Refreshing the Emby image only — existing config, port, and Caddy setup are left as-is."
|
|
( cd "$EMBY_DIR" && docker compose pull && docker compose up -d ) \
|
|
&& log_success "Emby image refreshed" \
|
|
|| log_warning "Refresh failed — check: docker compose -f $EMBY_DIR/docker-compose.yml logs"
|
|
return 0
|
|
;;
|
|
cancel)
|
|
log_info "Leaving the existing install as-is."
|
|
return 0
|
|
;;
|
|
fresh) ;; # fall through to the full install flow below
|
|
esac
|
|
fi
|
|
fi
|
|
fi
|
|
|
|
# Scan for free ports unconditionally — not just when adding an explicit
|
|
# additional instance. A plain first install can just as easily collide
|
|
# with an unrelated service that already claimed these default ports
|
|
# (e.g. jellyfin also defaults to 8096) — see CLAUDE.md's "Port collision
|
|
# avoidance" section.
|
|
find_free_port WEB_PORT "$WEB_PORT"
|
|
find_free_port HTTPS_PORT "$HTTPS_PORT"
|
|
|
|
local MUSIC_ONLY=""
|
|
prompt_yn "Set this up as a music-only server (skip movies/TV)? (y/n):" "n" MUSIC_ONLY
|
|
|
|
local DEFAULT_FOLDER="$DEFAULT_MEDIA" FOLDER_PROMPT="Path to media folder"
|
|
if [[ "$MUSIC_ONLY" =~ ^[Yy]$ ]]; then
|
|
DEFAULT_FOLDER="$ACTUAL_HOME/music"
|
|
FOLDER_PROMPT="Path to music folder"
|
|
fi
|
|
|
|
# Reset before the chain call, not after — VDM_LAST_MOUNT_POINT is a
|
|
# plain global set by services/vpn-data-mount.sh, so without this an
|
|
# unrelated earlier vpn-data-mount run in the same setup.sh session
|
|
# would silently leak its mount point in here as the default even if
|
|
# the user declines below or this chain never runs at all.
|
|
unset VDM_LAST_MOUNT_POINT
|
|
if declare -F install_vpn-data-mount >/dev/null 2>&1; then
|
|
local USE_VPN_DATA=""
|
|
prompt_yn "Is your media on a VPN-connected home box that isn't mounted yet? (y/n):" "n" USE_VPN_DATA
|
|
[[ "$USE_VPN_DATA" =~ ^[Yy]$ ]] && install_vpn-data-mount
|
|
fi
|
|
[ -n "${VDM_LAST_MOUNT_POINT:-}" ] && DEFAULT_FOLDER="$VDM_LAST_MOUNT_POINT"
|
|
|
|
local MEDIA_PATH=""
|
|
prompt_text "$FOLDER_PROMPT [$DEFAULT_FOLDER]:" "$DEFAULT_FOLDER" MEDIA_PATH
|
|
MEDIA_PATH="${MEDIA_PATH/#\~/$ACTUAL_HOME}"; MEDIA_PATH="${MEDIA_PATH%/}"
|
|
|
|
mkdir -p "$EMBY_DIR"
|
|
ensure_docker_dir_ownership "$EMBY_DIR"
|
|
cd "$EMBY_DIR" || return 1
|
|
|
|
local TZ_VAL UID_VAL GID_VAL
|
|
TZ_VAL="${SITE_TZ:-$(cat /etc/timezone 2>/dev/null || echo UTC)}"
|
|
UID_VAL=$(id -u "$ACTUAL_USER"); GID_VAL=$(id -g "$ACTUAL_USER")
|
|
|
|
# Mirrors configure_caddy_for_service's own mode resolution (lib/common.sh):
|
|
# explicit CADDY_MODE from the site config wins, then a local ~/docker/caddy,
|
|
# then the legacy CADDY_REMOTE_HOST var. Only "local" joins caddy_net — a
|
|
# remote Caddy box can't resolve container names on this host's bridge
|
|
# network anyway; it reaches this service via the host's published port.
|
|
local _CADDY_MODE="${CADDY_MODE:-none}"
|
|
[ "$_CADDY_MODE" = "none" ] && [ -d "$DOCKER_DIR/caddy" ] && _CADDY_MODE="local"
|
|
[ "$_CADDY_MODE" = "none" ] && [ -n "${CADDY_REMOTE_HOST:-}" ] && _CADDY_MODE="remote"
|
|
|
|
local _CADDY_NET_BLOCK=""
|
|
local _CADDY_NET_SECTION=""
|
|
if [ "$_CADDY_MODE" = "local" ]; then
|
|
_CADDY_NET_BLOCK=" networks:
|
|
- caddy_net
|
|
"
|
|
_CADDY_NET_SECTION="
|
|
networks:
|
|
caddy_net:
|
|
external: true
|
|
name: ${SITE_CADDY_NET:-caddy_net}
|
|
"
|
|
fi
|
|
|
|
cat > docker-compose.yml << EMBY_COMPOSE
|
|
name: $CONTAINER
|
|
|
|
services:
|
|
emby:
|
|
image: emby/embyserver:latest
|
|
container_name: $CONTAINER
|
|
hostname: $CONTAINER
|
|
restart: unless-stopped
|
|
environment:
|
|
- UID=$UID_VAL
|
|
- GID=$GID_VAL
|
|
- TZ=$TZ_VAL
|
|
volumes:
|
|
- ./config:/config
|
|
- \${MEDIA_PATH}:/media
|
|
ports:
|
|
- "${WEB_PORT}:8096"
|
|
- "${HTTPS_PORT}:8920"
|
|
# Uncomment for hardware transcoding (Intel/AMD):
|
|
# devices:
|
|
# - /dev/dri:/dev/dri
|
|
${_CADDY_NET_BLOCK}${_CADDY_NET_SECTION}
|
|
EMBY_COMPOSE
|
|
|
|
cat > .env << EMBY_ENV
|
|
MEDIA_PATH=$MEDIA_PATH
|
|
CADDY_NET=$SITE_CADDY_NET
|
|
EMBY_ENV
|
|
|
|
mkdir -p config
|
|
chown -R "$ACTUAL_USER:$ACTUAL_USER" "$EMBY_DIR"
|
|
log_success "Emby${INSTANCE_SUFFIX:+ ($INSTANCE_SUFFIX)} configured at $EMBY_DIR (port $WEB_PORT)"
|
|
|
|
configure_caddy_for_service "Emby${INSTANCE_SUFFIX:+ ($INSTANCE_SUFFIX)}" "${CONTAINER}:8096" "emby${INSTANCE_SUFFIX:+-$INSTANCE_SUFFIX}"
|
|
|
|
write_readme "$EMBY_DIR" << MD
|
|
# Emby${INSTANCE_SUFFIX:+ — $INSTANCE_SUFFIX}
|
|
|
|
Media server for movies, TV, and music.
|
|
$( [ -n "$INSTANCE_SUFFIX" ] && echo "
|
|
This is a separate, fully isolated instance (own server, own library, own
|
|
ports) — not another library within another Emby instance.")
|
|
|
|
- Web UI: http://localhost:${WEB_PORT} (HTTPS on ${HTTPS_PORT})
|
|
- Media folder: \`$MEDIA_PATH\` → mounted at /media
|
|
- App data: \`config/\` in this folder
|
|
- Edit the media path in \`.env\` (\`MEDIA_PATH=\`), then \`docker compose up -d\`.
|
|
|
|
## Manage
|
|
\`\`\`bash
|
|
cd $EMBY_DIR
|
|
docker compose up -d # start
|
|
docker compose down # stop
|
|
docker compose logs -f # logs
|
|
docker compose pull && docker compose up -d # update
|
|
\`\`\`
|
|
|
|
## Hardware transcoding
|
|
Uncomment the \`devices: [/dev/dri:/dev/dri]\` block in \`docker-compose.yml\`
|
|
once you've confirmed your Intel/AMD GPU exposes a render node, then restart.
|
|
$( [[ "$MUSIC_ONLY" =~ ^[Yy]$ ]] && cat << MUSICMD
|
|
|
|
## Music-only setup (per-user library access)
|
|
This mount is meant to hold only your music library — which library types
|
|
you actually add still happens in Emby's own first-run setup wizard, not
|
|
this script (Emby has no compose/env flag for "music-only"; it's a web-UI
|
|
step):
|
|
|
|
1. Open http://localhost:${WEB_PORT} and complete the setup wizard.
|
|
2. When adding a library, choose type **Music**, point it at \`/media\`,
|
|
and don't add any Movies/TV/other library types.
|
|
3. **Per-user library access** (the reason to pick Emby over a Squeezebox
|
|
setup for this role): Dashboard → Users → select a user → **Access** tab
|
|
→ under "Library Access", uncheck "Enable access to all libraries" and
|
|
pick only the libraries that user should see. Repeat per user. New users
|
|
default to full access, so revisit this each time you add one.
|
|
4. Casting to Chromecast/other cast targets works out of the box from
|
|
Emby's own apps — nothing to configure here for that.
|
|
|
|
Emby is a generalist media server, not a purpose-built music server — for
|
|
an always-on background/kiosk audio zone, a dedicated Squeezebox setup
|
|
(\`lyrion\`, with \`squeezelite\` as the player) is the more solid choice;
|
|
use this Emby instance for browser-based, per-user-restricted access
|
|
instead of as the primary always-on player.
|
|
MUSICMD
|
|
)
|
|
MD
|
|
|
|
local START_EMBY=""
|
|
prompt_yn "Start Emby${INSTANCE_SUFFIX:+ ($INSTANCE_SUFFIX)} now? (y/n):" "y" START_EMBY
|
|
if [ "$START_EMBY" = "y" ] || [ "$START_EMBY" = "Y" ]; then
|
|
docker compose up -d && log_success "Emby${INSTANCE_SUFFIX:+ ($INSTANCE_SUFFIX)} started" || log_warning "Failed to start — check: docker compose logs"
|
|
fi
|
|
|
|
echo ""
|
|
echo " Access at: http://localhost:${WEB_PORT}"
|
|
echo ""
|
|
}
|
|
|
|
# Run immediately when executed directly (deferred until after function definition)
|
|
[[ "${_RUN_STANDALONE:-0}" == 1 ]] && install_emby
|