Claude
11a4e249b6
Same bug as the previous filebrowser/fmd fix: vaultwarden, immich, audiobookshelf, homebox, rustdesk, emby, meshcentral, traccar, lyrion, actualbudget, mealie, joplin, jellyfin, unifi, and ntfy all showed "Manage that install (update / full reinstall / cancel)" when re-run against an existing install, but choosing "1) Manage" fell straight through into the same unconditional fresh-install flow every time regardless of choice — no way to actually cancel or update in place. Wired all 15 up to prompt_reinstall_mode, matching the reference pattern in services/mattermost.sh: update pulls + restarts the existing container without touching config, cancel leaves the install untouched, fresh falls through to the existing full-install flow unchanged. Also add `setup.sh --status`: a plain-text listing of every service with its install state, using the exact same is_installed() calls the whiptail checklist's [installed] marker uses. Exists so "is X actually installed" can be answered by reading terminal output directly, without depending on a whiptail checklist screen where a narrow/resized terminal can truncate the "[installed]" suffix off-screen with no visible sign that happened.
345 lines
14 KiB
Bash
345 lines
14 KiB
Bash
#!/bin/bash
|
|
# services/rustdesk.sh — RustDesk self-hosted remote desktop relay server.
|
|
# Part of the modular post-install system (sourced by setup.sh).
|
|
#
|
|
# Can also be run standalone on any machine:
|
|
# sudo bash rustdesk.sh
|
|
# (Docker must already be installed when run standalone)
|
|
#
|
|
# RustDesk is an open-source TeamViewer alternative. This installs the
|
|
# SERVER-SIDE relay/rendezvous daemon — clients still need the RustDesk app.
|
|
# For cross-VLAN / cross-internet access, point RELAY at this server's FQDN.
|
|
#
|
|
# Ports that must reach this host (firewall/router):
|
|
# 21115 TCP — NAT type test
|
|
# 21116 TCP — ID register / heartbeat / relay rendezvous
|
|
# 21116 UDP — UDP hole-punching
|
|
# 21117 TCP — relay traffic (the "HBBR" relay daemon)
|
|
# 21118 TCP — WebSocket (browser client support)
|
|
# 21119 TCP — WebSocket HTTPS (browser client support)
|
|
|
|
# ── Standalone bootstrap ──────────────────────────────────────────────────────
|
|
# Detected when the script is executed directly rather than sourced by setup.sh.
|
|
# Sets up helpers and globals, then defers execution until after the function
|
|
# definition at the bottom of this file.
|
|
if [[ "${BASH_SOURCE[0]}" == "${0}" ]]; then
|
|
[[ "$(id -u)" == "0" ]] || { echo "Run with sudo: sudo bash $0"; exit 1; }
|
|
|
|
_SELF_DIR="$(cd "$(dirname "${BASH_SOURCE[0]}")" && pwd)"
|
|
_COMMON="$_SELF_DIR/../lib/common.sh"
|
|
|
|
if [[ -f "$_COMMON" ]]; then
|
|
# Full repo present — use the real helpers (picks up ~/docker/.config too)
|
|
# shellcheck source=../lib/common.sh
|
|
source "$_COMMON"
|
|
else
|
|
# One-off copy — inline minimal stubs so the script works without the repo
|
|
log_info() { echo -e "\033[0;34m[INFO]\033[0m $*"; }
|
|
log_success() { echo -e "\033[0;32m[OK]\033[0m $*"; }
|
|
log_warning() { echo -e "\033[1;33m[WARN]\033[0m $*"; }
|
|
log_error() { echo -e "\033[0;31m[ERROR]\033[0m $*" >&2; }
|
|
|
|
require_docker() {
|
|
command -v docker &>/dev/null || {
|
|
log_error "Docker not found. Install it first:"
|
|
log_error " curl -fsSL https://get.docker.com | sudo sh"
|
|
return 1
|
|
}
|
|
docker compose version &>/dev/null || {
|
|
log_error "Docker Compose plugin missing:"
|
|
log_error " sudo apt-get install -y docker-compose-plugin"
|
|
return 1
|
|
}
|
|
}
|
|
|
|
ensure_docker_dir_ownership() {
|
|
chown -R "$ACTUAL_USER:$ACTUAL_USER" "$@" 2>/dev/null || true
|
|
}
|
|
|
|
port_in_use() {
|
|
local _port="$1" _proto="${2:-tcp}"
|
|
local _flag="-tlnH"
|
|
[ "$_proto" = "udp" ] && _flag="-ulnH"
|
|
ss "$_flag" "sport = :${_port}" 2>/dev/null | grep -q .
|
|
}
|
|
|
|
find_free_port() {
|
|
local _varname="$1" _port="$2" _proto="${3:-tcp}"
|
|
while port_in_use "$_port" "$_proto"; do
|
|
_port=$((_port + 1))
|
|
done
|
|
eval "$_varname='$_port'"
|
|
}
|
|
|
|
# Match common.sh's eval-based pattern so local vars in install_* are set correctly
|
|
prompt_text() {
|
|
local _q="$1" _def="$2" _var="$3" _r
|
|
[[ "${UNATTENDED:-false}" == "true" ]] && { eval "$_var='$_def'"; return; }
|
|
read -r -p " $_q " _r
|
|
eval "$_var='${_r:-$_def}'"
|
|
}
|
|
|
|
prompt_yn() {
|
|
local _q="$1" _def="$2" _var="$3" _r
|
|
[[ "${UNATTENDED:-false}" == "true" ]] && { eval "$_var='$_def'"; return; }
|
|
read -r -p " $_q " _r
|
|
eval "$_var='${_r:-$_def}'"
|
|
}
|
|
|
|
write_readme() {
|
|
local _dir="$1"; shift
|
|
mkdir -p "$_dir"
|
|
cat > "$_dir/README.md"
|
|
}
|
|
fi
|
|
|
|
# Globals — ACTUAL_USER/ACTUAL_HOME must come before DOCKER_DIR
|
|
# ($HOME under sudo is /root, not the real user's home)
|
|
ACTUAL_USER="${ACTUAL_USER:-${SUDO_USER:-$USER}}"
|
|
ACTUAL_HOME="$(getent passwd "$ACTUAL_USER" 2>/dev/null | cut -d: -f6 || echo "${HOME:-/root}")"
|
|
DOCKER_DIR="${DOCKER_DIR:-$ACTUAL_HOME/docker}"
|
|
DRY_RUN="${DRY_RUN:-false}"
|
|
UNATTENDED="${UNATTENDED:-false}"
|
|
SITE_TZ="${SITE_TZ:-$(cat /etc/timezone 2>/dev/null || echo UTC)}"
|
|
SITE_DOMAIN="${SITE_DOMAIN:-example.com}"
|
|
SITE_CADDY_NET="${SITE_CADDY_NET:-caddy_net}"
|
|
CADDY_REMOTE_HOST="${CADDY_REMOTE_HOST:-}"
|
|
|
|
register_service() { :; } # no-op — no wizard to register into
|
|
_RUN_STANDALONE=1
|
|
fi
|
|
# ─────────────────────────────────────────────────────────────────────────────
|
|
|
|
register_service rustdesk utilities "Self-hosted remote desktop relay (RustDesk)" 21117
|
|
|
|
install_rustdesk() {
|
|
require_docker || return 1
|
|
log_info "Installing RustDesk server..."
|
|
|
|
# ── Instance selection ───────────────────────────────────────────────────
|
|
# First instance keeps the plain "rustdesk" name/paths/ports exactly as
|
|
# before (zero behavior change for anyone with a single instance). Only
|
|
# asking to add a second one introduces suffixed naming — same pattern as
|
|
# services/mattermost.sh and services/wordpress.sh. The 6 ports
|
|
# (21115-21119 TCP + 21116 UDP) are fixed *inside* the container — the
|
|
# image doesn't expose an env var to change them — so an additional
|
|
# instance shifts the whole host-side block by a fixed offset instead of
|
|
# scanning port-by-port, the same approach services/traccar.sh uses for
|
|
# its device-protocol range.
|
|
local RD_DIR="$DOCKER_DIR/rustdesk"
|
|
local INSTANCE_SUFFIX="" CONTAINER="rustdesk"
|
|
local PORT_OFFSET=0
|
|
|
|
if [ "$DRY_RUN" = true ]; then
|
|
echo "[DRY-RUN] Would offer to add a new, separate instance if one already exists"
|
|
echo "[DRY-RUN] Would create \$DOCKER_DIR/rustdesk(-<name>) (rustdesk_data/)"
|
|
echo "[DRY-RUN] Would deploy rustdesk/rustdesk-server-s6:latest"
|
|
echo "[DRY-RUN] Ports: 21115-21119 TCP, 21116 UDP — whole block shifted for additional instances"
|
|
echo "[DRY-RUN] Would prompt for server FQDN/IP (RELAY env var)"
|
|
return 0
|
|
fi
|
|
|
|
if [ -d "$RD_DIR" ]; then
|
|
echo ""
|
|
echo " RustDesk is already installed at $RD_DIR."
|
|
echo " 1) Manage that install (update / full reinstall / cancel)"
|
|
echo " 2) Add a NEW, separate RustDesk relay instance alongside it (its own"
|
|
echo " server and ports — full isolation)"
|
|
echo ""
|
|
local _TOP_CHOICE=""
|
|
prompt_text " Choice [1/2]:" "1" _TOP_CHOICE
|
|
if [ "$_TOP_CHOICE" = "2" ]; then
|
|
local _suffix=""
|
|
while true; do
|
|
prompt_text " Short name for the new instance (letters/numbers/hyphens, e.g. 'work'):" "" _suffix
|
|
_suffix="$(echo "$_suffix" | tr -cs 'a-zA-Z0-9-' '-' | sed 's/^-*//;s/-*$//')"
|
|
if [ -z "$_suffix" ]; then
|
|
log_warning "Name can't be empty."; continue
|
|
fi
|
|
if [ -d "$DOCKER_DIR/rustdesk-$_suffix" ]; then
|
|
log_warning "rustdesk-$_suffix already exists — pick another name."; continue
|
|
fi
|
|
break
|
|
done
|
|
INSTANCE_SUFFIX="$_suffix"
|
|
RD_DIR="$DOCKER_DIR/rustdesk-$_suffix"
|
|
CONTAINER="rustdesk-$_suffix"
|
|
log_info "New instance: $RD_DIR"
|
|
else
|
|
# "Manage that install" on THIS instance — the banner above promises
|
|
# update/fresh/cancel, so actually offer it instead of falling straight
|
|
# through into the same unconditional-overwrite flow as a new install.
|
|
if [[ -f "$RD_DIR/docker-compose.yml" ]]; then
|
|
local MODE=""
|
|
prompt_reinstall_mode MODE
|
|
case "$MODE" in
|
|
update)
|
|
log_info "Refreshing the RustDesk image only — existing config, port, and Caddy setup are left as-is."
|
|
( cd "$RD_DIR" && docker compose pull && docker compose up -d ) \
|
|
&& log_success "RustDesk image refreshed" \
|
|
|| log_warning "Refresh failed — check: docker compose -f $RD_DIR/docker-compose.yml logs"
|
|
return 0
|
|
;;
|
|
cancel)
|
|
log_info "Leaving the existing install as-is."
|
|
return 0
|
|
;;
|
|
fresh) ;; # fall through to the full install flow below
|
|
esac
|
|
fi
|
|
fi
|
|
fi
|
|
|
|
# Scan for a free port block unconditionally, shifting the whole 6-port
|
|
# block together — not just when adding an explicit additional instance.
|
|
# A plain first install can just as easily collide with an unrelated
|
|
# service already bound to one of these default ports — see CLAUDE.md's
|
|
# "Port collision avoidance" section.
|
|
while port_in_use "$((21115 + PORT_OFFSET))" \
|
|
|| port_in_use "$((21116 + PORT_OFFSET))" \
|
|
|| port_in_use "$((21116 + PORT_OFFSET))" udp \
|
|
|| port_in_use "$((21117 + PORT_OFFSET))" \
|
|
|| port_in_use "$((21118 + PORT_OFFSET))" \
|
|
|| port_in_use "$((21119 + PORT_OFFSET))"; do
|
|
PORT_OFFSET=$((PORT_OFFSET + 10))
|
|
done
|
|
|
|
mkdir -p "$RD_DIR/rustdesk_data"
|
|
ensure_docker_dir_ownership "$RD_DIR"
|
|
cd "$RD_DIR" || return 1
|
|
|
|
local TZ_VAL="${SITE_TZ:-$(cat /etc/timezone 2>/dev/null || echo UTC)}"
|
|
local P_NAT=$((21115 + PORT_OFFSET)) P_ID=$((21116 + PORT_OFFSET)) \
|
|
P_RELAY=$((21117 + PORT_OFFSET)) P_WS=$((21118 + PORT_OFFSET)) P_WSS=$((21119 + PORT_OFFSET))
|
|
|
|
echo ""
|
|
echo " RustDesk needs to know its own public hostname or IP."
|
|
echo " Clients will connect to this address for relay traffic."
|
|
echo " Use a FQDN if you have one (e.g. rustdesk.example.com),"
|
|
echo " or your server's public IP if not."
|
|
echo ""
|
|
local RELAY_HOST=""
|
|
prompt_text "Public hostname or IP for this server:" "" RELAY_HOST
|
|
if [ -z "$RELAY_HOST" ]; then
|
|
log_warning "No relay host set — you MUST edit RELAY in .env before clients will work."
|
|
RELAY_HOST="your-server-fqdn-or-ip"
|
|
fi
|
|
|
|
local ENCRYPTED_ONLY="1"
|
|
local _enc=""
|
|
prompt_yn "Require encrypted connections only? (recommended) (y/n):" "y" _enc
|
|
[ "$_enc" = "n" ] || [ "$_enc" = "N" ] && ENCRYPTED_ONLY="0"
|
|
|
|
cat > docker-compose.yml << RD_COMPOSE
|
|
name: $CONTAINER
|
|
|
|
services:
|
|
rustdesk:
|
|
image: rustdesk/rustdesk-server-s6:latest
|
|
container_name: $CONTAINER
|
|
hostname: $CONTAINER
|
|
restart: unless-stopped
|
|
env_file: .env
|
|
ports:
|
|
- "${P_NAT}:21115"
|
|
- "${P_ID}:21116"
|
|
- "${P_ID}:21116/udp"
|
|
- "${P_RELAY}:21117"
|
|
- "${P_WS}:21118"
|
|
- "${P_WSS}:21119"
|
|
volumes:
|
|
- ./rustdesk_data:/data
|
|
RD_COMPOSE
|
|
|
|
cat > .env << RD_ENV
|
|
# ── General ───────────────────────────────────────────────────────────────────
|
|
TZ=$TZ_VAL
|
|
|
|
# ── RustDesk server ───────────────────────────────────────────────────────────
|
|
# RELAY: public FQDN or IP that clients use to reach the relay daemon (HBBR).
|
|
# Include the port if it's non-standard: hostname:$P_RELAY
|
|
RELAY=$RELAY_HOST:$P_RELAY
|
|
|
|
# ENCRYPTED_ONLY: 1 = only clients with the matching public key can connect.
|
|
# After first startup, copy the key from ./rustdesk_data/id_ed25519.pub to
|
|
# each client: Settings → Network → Key.
|
|
ENCRYPTED_ONLY=$ENCRYPTED_ONLY
|
|
|
|
# KEY_PRIV and KEY_PUB — optional: paste key file contents here instead of
|
|
# relying on the volume-mounted file. Useful for portability.
|
|
# KEY_PRIV=<content of ./rustdesk_data/id_ed25519>
|
|
# KEY_PUB=<content of ./rustdesk_data/id_ed25519.pub>
|
|
RD_ENV
|
|
|
|
chmod 600 .env
|
|
chown -R "$ACTUAL_USER:$ACTUAL_USER" "$RD_DIR"
|
|
log_success "RustDesk${INSTANCE_SUFFIX:+ ($INSTANCE_SUFFIX)} configured at $RD_DIR (ports $P_NAT-$P_WSS)"
|
|
|
|
write_readme "$RD_DIR" << MD
|
|
# RustDesk${INSTANCE_SUFFIX:+ — $INSTANCE_SUFFIX} — self-hosted remote desktop relay
|
|
|
|
Open-source TeamViewer alternative. This is the server-side relay/rendezvous
|
|
daemon. Clients use the RustDesk desktop/mobile app to connect.
|
|
$( [ -n "$INSTANCE_SUFFIX" ] && echo "
|
|
This is a separate, fully isolated instance (own server, own key, own port
|
|
block) — not shared clients with another RustDesk instance.")
|
|
|
|
## After starting: get the public key
|
|
|
|
\`\`\`bash
|
|
cat $RD_DIR/rustdesk_data/id_ed25519.pub
|
|
\`\`\`
|
|
|
|
Paste this key into each client:
|
|
**Settings → Network → ID/Relay Server**
|
|
- ID Server: $RELAY_HOST:$P_ID
|
|
- Relay Server: $RELAY_HOST:$P_RELAY
|
|
- Key: <paste id_ed25519.pub contents>
|
|
|
|
## Firewall / router rules required
|
|
|
|
Open these ports to this server's IP:
|
|
| Port | Protocol | Purpose |
|
|
|------|----------|---------|
|
|
| $P_NAT | TCP | NAT type test |
|
|
| $P_ID | TCP+UDP | ID register / hole-punching |
|
|
| $P_RELAY | TCP | Relay traffic |
|
|
| $P_WS | TCP | WebSocket |
|
|
| $P_WSS | TCP | WebSocket HTTPS |
|
|
|
|
## Cross-VLAN setup
|
|
Use the server's FQDN (not LAN IP) in RELAY so clients on any VLAN
|
|
or on the internet can reach the relay. DNS must resolve the FQDN to
|
|
the server's public IP.
|
|
|
|
## Manage
|
|
\`\`\`bash
|
|
cd $RD_DIR
|
|
docker compose up -d # start
|
|
docker compose down # stop
|
|
docker compose logs -f # logs
|
|
docker compose pull && docker compose up -d # update
|
|
\`\`\`
|
|
MD
|
|
|
|
local START_RD=""
|
|
prompt_yn "Start RustDesk server${INSTANCE_SUFFIX:+ ($INSTANCE_SUFFIX)} now? (y/n):" "y" START_RD
|
|
if [ "$START_RD" = "y" ] || [ "$START_RD" = "Y" ]; then
|
|
docker compose up -d \
|
|
&& log_success "RustDesk${INSTANCE_SUFFIX:+ ($INSTANCE_SUFFIX)} started" \
|
|
|| log_warning "Failed to start — check: docker compose logs"
|
|
echo ""
|
|
echo " After startup, get the public key:"
|
|
echo " cat $RD_DIR/rustdesk_data/id_ed25519.pub"
|
|
echo " Paste it into client Settings → Network → Key."
|
|
fi
|
|
|
|
echo ""
|
|
echo " Relay host: $RELAY_HOST"
|
|
echo " Ports $P_NAT-$P_WSS must be open in your firewall/router."
|
|
echo ""
|
|
}
|
|
|
|
# Run immediately when executed directly (deferred until after function definition)
|
|
[[ "${_RUN_STANDALONE:-0}" == 1 ]] && install_rustdesk
|