traccar.sh's caddy_net wiring was fixed to mirror configure_caddy_for_service's
own mode resolution (CADDY_MODE from site config, then a local ~/docker/caddy,
then the legacy CADDY_REMOTE_HOST var) instead of only checking for the local
directory. That same bare directory check was copy-pasted into the caddy_net
wiring of every other Docker service in the repo, so a site with Caddy on a
different box would silently fail to join any of their containers to caddy_net
during setup (or, for homeassistant/koha, only get half the wiring right).
Applied the same fix mechanically across all 37 services using the standard
_CADDY_NET_BLOCK/_CADDY_NET_SECTION pattern (verified identical text via
scripted diff before touching any of them), plus by hand for:
- homeassistant.sh and koha.sh, which use their own differently-shaped
variables (HA_CADDY_NET_LINES / _CADDY_NET_ENTRY) for the same decision
- paintplus.sh and ai-stack.sh, which do a live `docker network connect`
instead of a compose network block
- watchyourlan.sh, whose Caddy note was worded for local-only setups
sms-inbound.sh got more than a mode swap: its Caddy wiring was hand-rolled
(not routed through configure_caddy_for_service) and had no remote-Caddy
path at all — a remote Caddy box would get a misleading "Caddy isn't
installed here" message instead of a snippet. Added
_sms_write_caddy_snippet(), mirroring the snippet-file pattern
configure_caddy_for_service uses everywhere else, and pointed the firewall
gate at the same three-way mode instead of a two-way dir check.
Verified: bash -n across all of services/*.sh, a scripted check that every
touched file has exactly one _CADDY_MODE resolution and no leftover bare
`[ -d "$DOCKER_DIR/caddy" ]` feeding a caddy_net decision, and spot-checked
docker compose config renders (traccar, mattermost) confirming the ${VAR}
interpolation and multi-service usage sites still resolve correctly.
Previously re-running the installer always overwrote config.yml and .env
from scratch, silently discarding any real camera credentials already on
disk. Now install_frigate parses an existing config.yml + .env (best-effort,
matching this installer's own output shape) and presents a numbered list
of detected cameras with a menu:
[1] Keep everything as-is (no changes at all)
[2] Backup existing config and start fresh
[3] Add more cameras (keep these)
[4] Remove cameras (choose numbers, or 'all'), then optionally add more
Implementation switches from building config.yml/.env as concatenated text
blocks inline in the collection loop to parallel CAM_* bash arrays
(name/ip/port/var-names/enabled/notify/substream-suffixes), so cameras can
be parsed, listed, removed, and re-rendered independently:
- _frigate_parse_existing: reads go2rtc streams + cameras: enabled/notifications
from config.yml, and credential values from .env, into the CAM_* arrays
- _frigate_review_existing: numbered menu, mutates arrays per choice
- _frigate_next_suffix_int: kept cameras retain their existing FRIGATE_RTSP_USER[N]
var names unchanged; new cameras get the next unused numeric suffix so
credentials never collide after removals
- _frigate_camera_wizard / _frigate_render_config: same prompts and output
shape as before, now array-driven so kept + new cameras render uniformly
- _frigate_backup_existing: copies config.yml/.env/docker-compose.yml to a
timestamped backup-YYYYMMDD-HHMMSS/ dir before any destructive rewrite
Verified with a 5-scenario test harness (fresh install, keep-as-is producing
byte-identical output, add-camera preserving existing credentials, remove-
by-number without var collisions, backup-and-fresh) before committing.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LQJBvqzXeyuhhAcAA3Q5Wq
Previously Frigate always wrote a placeholder config.yml the operator had
to hand-edit to add cameras. Now install_frigate prompts to add cameras
one at a time (name, RTSP IP/port/user/password/path, optional sub-stream,
enabled, notifications), matching the go2rtc + cameras structure used in
production frigate configs:
- Each camera gets a go2rtc stream entry (+ optional _sub for detection)
and a cameras: block with ffmpeg inputs/roles, detect, notifications
- RTSP credentials/IPs are written to .env as FRIGATE_* variables (first
camera gets FRIGATE_RTSP_USER/PASSWORD, later cameras get numbered
suffixes _1, _2, ... to avoid collisions) and referenced in config.yml
via Frigate's {FRIGATE_VAR} substitution syntax — secrets never appear
in the YAML directly
- docker-compose.yml now includes env_file: .env so those vars actually
reach the container for substitution to work
- Skipping all camera prompts falls back to the original starter
config.yml for manual editing, preserving existing behavior
- README and DRY-RUN summary updated to reflect the new flow
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LQJBvqzXeyuhhAcAA3Q5Wq
New site config key: CADDY_REMOTE_HOST (set via 'sudo ./setup.sh configure').
When set, configure_caddy_for_service operates in "remote" mode instead of
writing to a local Caddyfile:
- Upstream uses CADDY_REMOTE_HOST:PORT (host IP, not container name)
- Snippet saved to ~/docker/caddy-snippets/<subdomain>.caddy
- User is shown scp/rsync commands to copy it to the Caddy machine
Three modes in configure_caddy_for_service (lib/common.sh and inline stubs):
local: ~/docker/caddy/ exists → write Caddyfile + reload (existing behavior)
remote: CADDY_REMOTE_HOST set → save snippet, print copy instructions
none: neither configured → silent return (unchanged)
All 31 service standalone bootstrap stubs updated with the new logic.
CADDY_REMOTE_HOST global added to all 42 standalone bootstrap sections.
setup.sh configure now prompts for CADDY_REMOTE_HOST with a clear explanation.
wolf.sh: add missing stubs (configure_caddy_for_service, write_readme,
prompt_yn, ensure_docker_dir_ownership) and the Authelia/Caddy/start calls
that were missing from the install function.
https://claude.ai/code/session_014CCYqVwW6d6f5dw1qRokYt
Each service can now be run directly with sudo bash <service>.sh on any
machine with Docker installed, without needing the full post-install repo.
Uses the shared bootstrap pattern from docs/standalone-template.sh.
https://claude.ai/code/session_014CCYqVwW6d6f5dw1qRokYt
Undo the host.docker.internal approach from the previous commit — proper
Docker networking routes Caddy to services by container name on the shared
caddy_net, not via the host gateway.
- lib/common.sh: configure_caddy_for_service now accepts either a plain
port number (localhost:PORT fallback) or container:port (preferred).
The Caddyfile entry uses the container name for direct Docker DNS routing.
- services/caddy.sh: remove extra_hosts hack; update Caddyfile template
comments to show container_name:port format
- All service files: update configure_caddy_for_service calls to pass
container_name:internal_port (e.g. "filebrowser:80", "mealie:9000").
Services using network_mode:host keep plain port numbers.
- tools/manage_users.sh: new FileBrowser user-management script (deployed
to ~/docker/filebrowser/ during installation). Manages users via the
FileBrowser REST API: list, add, delete, passwd, scope, info commands.
Documents username format (letters/numbers/hyphens/underscores),
password rules (min 8 chars, letter + number required), and scope path
convention relative to /srv (= FB_PATH on the host).
https://claude.ai/code/session_01UZus2Q9gNTfUdqSMrhuX29
- lib/common.sh: fix broken reverse_proxy target — localhost inside Caddy's
container is the container's own loopback, not the host; change to
host.docker.internal so proxied ports are actually reachable
- services/caddy.sh: add extra_hosts host.docker.internal:host-gateway so
the above resolves correctly; create caddy_net bridge network in Caddy's
own compose so other services can reference it as external; update all
Caddyfile template comments and README examples to match
- services/filebrowser.sh: update image tag from deprecated :s6 to :latest;
remove non-functional PUID/PGID env vars (filebrowser/filebrowser does not
honour them); add configure_caddy_for_service call; add caddy_net
- services/ntfy.sh: add configure_caddy_for_service call; add caddy_net
- services/portainer.sh: add configure_caddy_for_service call; add caddy_net
- services/frigate-notify.sh, watchtower.sh: add caddy_net for
container-to-container comms (frigate, ntfy) without a Caddy call
- All remaining web-facing Docker services: add caddy_net network block to
docker-compose and CADDY_NET to .env where applicable; services using
network_mode: host (wolf-pair, lyrion) have the top-level block only
https://claude.ai/code/session_01UZus2Q9gNTfUdqSMrhuX29
Introduces a one-time configuration wizard (sudo ./setup.sh configure)
that stores SITE_TZ, SITE_DOMAIN, and SITE_CADDY_NET in ~/docker/.config.
Every service now uses these as prompt defaults so the user types common
values once instead of re-answering the same questions for each service.
- lib/common.sh: load_site_config / save_site_config; auto-loads on source;
backward-compat BASE_DOMAIN alias kept for old .config files
- setup.sh: run_site_configure wizard; first-run offer after base install;
`sudo ./setup.sh configure` command to update defaults at any time
- 14 services: TZ_VAL now honours SITE_TZ, falling back to /etc/timezone
- 3 inline-heredoc services (filebrowser, homeassistant, ntfy): same fix
- authelia: SITE_TZ/SITE_DOMAIN as prompt defaults; SITE_CADDY_NET replaces
hardcoded caddy_net throughout (env, compose patch, network creation)
- minecraft, frigate-audio: simplify BASE_DOMAIN read to use SITE_DOMAIN
- sky-cam: SITE_TZ as default for timezone prompt
https://claude.ai/code/session_01Y4dMKtkqkpvmgDKoRdzhTG
Claude