Add Anveo Direct/VoIP.ms known-provider quick-pick to pstn-trunk.sh
Prompts now start with a 1/2/3 choice (Anveo Direct / VoIP.ms / manual) that pre-fills already-known values - Anveo Direct's sbc.anveo.com hostname and its 4 published signaling IPs, so they don't need retyping from memory - plus provider-specific account-setup reminders. Every value stays editable at each subsequent prompt; this only changes defaults, not behavior, so existing manual-entry users see no change. Flagged rather than silently trusted: Anveo Direct's own Outbound Trunks page documents dialing as [PREFIX]PHONENUMBER@sbc.anveo.com, which contradicts an earlier no-prefix-needed finding from their FAQ. The dialplan still dials the bare number (matching the older finding) - the quick-pick prints a loud warning to verify the Prefix field can be left blank before relying on this, rather than guessing and hardcoding prefix handling without live confirmation either way. Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01Ho9mZgAkVpdz7S5wJkg8Nf
This commit is contained in:
Claude
@@ -504,3 +504,30 @@ generator output. Fixed by quoting every value in that heredoc.
|
||||
`messaging=yes` or `personal_did=` already on that extension — fixed
|
||||
to remove only the tier/allowed_numbers keys, dropping the section
|
||||
only once nothing else is left in it.
|
||||
16. Known-provider quick-pick — Done. A "1) Anveo Direct / 2) VoIP.ms /
|
||||
3) manual" choice at the top of the provider prompts pre-fills known
|
||||
values (Anveo Direct: `sbc.anveo.com`, the 4 published signaling IPs;
|
||||
VoIP.ms: just the provider name) — every value stays editable at each
|
||||
prompt, so this changes defaults only, never behavior. Extensions/
|
||||
users remain fully independent of this service either way — they're
|
||||
created through the base Asterisk install's own device management,
|
||||
and `pstn-trunk.sh` only grants PSTN permissions/personal numbers to
|
||||
extensions that already exist.
|
||||
17. **Open, unresolved**: Anveo Direct's own "Outbound Trunks" configuration
|
||||
page documents outbound dialing as `[PREFIX]PHONENUMBER@sbc.anveo.com`
|
||||
— a per-trunk custom prefix. This directly contradicts the earlier
|
||||
"no dial prefix needed" finding sourced from their FAQ (see the Anveo
|
||||
Direct provider notes above). Not resolved either way: whether the
|
||||
Prefix field can be left blank when creating an outbound Call
|
||||
Termination trunk in their portal. This dialplan dials the bare
|
||||
number with no prefix, matching the FAQ-sourced finding — if the
|
||||
Prefix field turns out to require a non-empty value, outbound calls
|
||||
through that trunk won't match and will fail, and this installer
|
||||
would need a `PREFIX` setting threaded into `${EXTEN}` before
|
||||
`Dial()`. Flagged with a loud warning in the CLI's Anveo Direct
|
||||
quick-pick rather than silently trusting the older finding. Also
|
||||
unresolved: a Trial Anveo Direct account shows its own "$2 / 30 days"
|
||||
spending limit and "$2 minimum account balance" in the portal —
|
||||
unclear whether either changes once the account is verified/funded
|
||||
beyond Trial status; this sits below and independent of anything this
|
||||
repo's own kill-switch enforces.
|
||||
|
||||
+50
-5
@@ -1177,10 +1177,13 @@ install_pstn-trunk() {
|
||||
|
||||
if [ "$DRY_RUN" = true ]; then
|
||||
echo "[DRY-RUN] Would require an existing asterisk-digital-ocean OR asterisk (LAN) install"
|
||||
echo "[DRY-RUN] Would prompt for: SIP provider name (any IP-authenticated provider), server/POP hostname, DID,"
|
||||
echo "[DRY-RUN] Would prompt for: known-provider quick-pick (Anveo Direct/VoIP.ms pre-fill known"
|
||||
echo "[DRY-RUN] server/signaling-IP values; still editable) or manual entry, SIP provider name, DID,"
|
||||
echo "[DRY-RUN] full-PSTN extensions, restricted-PSTN extensions + their approved numbers,"
|
||||
echo "[DRY-RUN] internal SIP messaging extensions (separate from PSTN calling permission),"
|
||||
echo "[DRY-RUN] max concurrent outbound/inbound calls (default 10/10), inbound ring-group extensions,"
|
||||
echo "[DRY-RUN] optional personal-number assignments (DID -> owner extension, additive to the"
|
||||
echo "[DRY-RUN] shared trunk DID), max concurrent outbound/inbound calls (default 10/10),"
|
||||
echo "[DRY-RUN] inbound ring-group extensions,"
|
||||
echo "[DRY-RUN] ntfy alert topic (optional), international-calling allow-list (CLI-only,"
|
||||
echo "[DRY-RUN] always asked, never on the web dashboard), per-minute rate + monthly/hourly"
|
||||
echo "[DRY-RUN] alert thresholds, and an optional hard monthly spend-cap kill-switch"
|
||||
@@ -1282,11 +1285,53 @@ install_pstn-trunk() {
|
||||
|
||||
# ── Prompts — provider account details aren't scriptable, set up manually
|
||||
# on the provider's own site first (see warning above) ───────────────────
|
||||
# Known-provider quick-path: only pre-fills the defaults below (still
|
||||
# fully editable at each prompt) — doesn't change any dialplan/auth
|
||||
# behavior, which stays provider-generic either way.
|
||||
echo " Known/tested providers — this only pre-fills the defaults below (server"
|
||||
echo " hostname, signaling IPs, account-setup reminders); every value is still"
|
||||
echo " editable at each prompt."
|
||||
echo " 1) Anveo Direct"
|
||||
echo " 2) VoIP.ms"
|
||||
echo " 3) Something else / manual entry"
|
||||
local _provider_choice=""
|
||||
prompt_text "Choice (1/2/3):" "3" _provider_choice
|
||||
|
||||
local _default_provider_name="" _default_server="" _default_extra_ips=""
|
||||
case "$_provider_choice" in
|
||||
1)
|
||||
_default_provider_name="Anveo Direct"
|
||||
_default_server="sbc.anveo.com"
|
||||
_default_extra_ips="169.48.232.158 204.216.109.55 176.9.39.206 72.9.149.25"
|
||||
echo ""
|
||||
log_info "Anveo Direct known values pre-filled below (hostname, 4 published signaling IPs)."
|
||||
log_warning "Before continuing: create/verify your account at"
|
||||
log_warning " https://www.anveo.com/account.asp?account_type=direct"
|
||||
log_warning "fund it, order a DID, and configure at least one outbound Call"
|
||||
log_warning "Termination trunk in Anveo's own portal (Outbound Trunks page). A Trial"
|
||||
log_warning "account shows its own \$2/30-day spend limit and \$2 minimum balance —"
|
||||
log_warning "separate from anything this installer enforces; confirm with Anveo"
|
||||
log_warning "support whether those change once verified/funded. Their CallerID policy"
|
||||
log_warning "requires a verified/Anveo-owned number as Caller-ID — any DID you order"
|
||||
log_warning "through them satisfies that automatically (see this service's personal-"
|
||||
log_warning "number feature for assigning a specific one per extension)."
|
||||
log_warning "UNVERIFIED: Anveo's own outbound-trunk page documents dialing as"
|
||||
log_warning "[PREFIX]PHONENUMBER@sbc.anveo.com (a per-trunk prefix) — this contradicts"
|
||||
log_warning "an earlier no-prefix-needed finding from their FAQ. This dialplan dials"
|
||||
log_warning "the bare number, no prefix. Check whether your configured trunk's Prefix"
|
||||
log_warning "field can be left blank before relying on this — if it can't, outbound"
|
||||
log_warning "calls through that trunk won't match and will fail."
|
||||
;;
|
||||
2)
|
||||
_default_provider_name="VoIP.ms"
|
||||
;;
|
||||
esac
|
||||
|
||||
local PROVIDER_NAME=""
|
||||
prompt_text "SIP trunk provider name (for your reference/docs only — e.g. VoIP.ms, Anveo Direct):" "" PROVIDER_NAME
|
||||
prompt_text "SIP trunk provider name (for your reference/docs only — e.g. VoIP.ms, Anveo Direct):" "$_default_provider_name" PROVIDER_NAME
|
||||
|
||||
local TRUNK_SERVER=""
|
||||
prompt_text "Server/POP hostname (e.g. atlanta2.voip.ms for VoIP.ms — pick the one closest to this box from your provider's server list):" "" TRUNK_SERVER
|
||||
prompt_text "Server/POP hostname (e.g. atlanta2.voip.ms for VoIP.ms, sbc.anveo.com for Anveo Direct — pick the one closest to this box from your provider's server list):" "$_default_server" TRUNK_SERVER
|
||||
if [[ -z "$TRUNK_SERVER" ]]; then
|
||||
log_error "A server hostname is required — aborting."
|
||||
return 1
|
||||
@@ -1311,7 +1356,7 @@ install_pstn-trunk() {
|
||||
# dial out to) — the resolved IP above always gets included, this just
|
||||
# adds any others the provider documents.
|
||||
local EXTRA_IPS=""
|
||||
prompt_text "Any additional known source IPs for inbound calls, space-separated (check your provider's docs — e.g. a firewall/signaling IP list; blank if the resolved IP above is the only one):" "" EXTRA_IPS
|
||||
prompt_text "Any additional known source IPs for inbound calls, space-separated (check your provider's docs — e.g. a firewall/signaling IP list; blank if the resolved IP above is the only one):" "$_default_extra_ips" EXTRA_IPS
|
||||
local _octet='(25[0-5]|2[0-4][0-9]|[01]?[0-9][0-9]?)'
|
||||
local _ip_re="^${_octet}\\.${_octet}\\.${_octet}\\.${_octet}\$"
|
||||
local TRUNK_SERVER_IPS="$TRUNK_SERVER_IP" _ip
|
||||
|
||||
Reference in New Issue
Block a user