Make Samba and rclone backup system optional
- Add interactive prompt before Samba installation - Add interactive prompt before rclone backup system setup - Update summary section to conditionally display installed components - Fix indentation in backup script section
This commit is contained in:
Claude
+189
-149
@@ -243,25 +243,36 @@ echo "Verifying Docker installation..."
|
||||
docker --version || echo "Warning: Docker verification failed"
|
||||
docker compose version || echo "Warning: Docker Compose verification failed"
|
||||
|
||||
# Install and Configure Samba
|
||||
# Samba File Sharing (Optional)
|
||||
echo ""
|
||||
echo "Installing Samba file sharing..."
|
||||
echo " - Samba: SMB/CIFS file server for network file sharing"
|
||||
echo "━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━"
|
||||
echo "SAMBA FILE SHARING (Optional)"
|
||||
echo "━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━"
|
||||
echo ""
|
||||
echo "Samba allows you to share folders over the network to Windows, Mac, and Linux."
|
||||
echo "The script will share your primary drive at ~/drives/primary"
|
||||
echo ""
|
||||
read -p "Install and configure Samba file sharing? (y/n): " INSTALL_SAMBA
|
||||
|
||||
apt install -y samba || echo "Warning: Samba installation failed, continuing..."
|
||||
|
||||
# Configure Samba share for primary drive
|
||||
if command -v smbd &> /dev/null; then
|
||||
if [ "$INSTALL_SAMBA" = "y" ] || [ "$INSTALL_SAMBA" = "Y" ]; then
|
||||
echo ""
|
||||
echo "Installing Samba file sharing..."
|
||||
echo " - Samba: SMB/CIFS file server for network file sharing"
|
||||
echo ""
|
||||
echo "Configuring Samba share for primary drive..."
|
||||
|
||||
# Backup existing config
|
||||
cp /etc/samba/smb.conf /etc/samba/smb.conf.backup-$(date +%Y%m%d-%H%M%S)
|
||||
apt install -y samba || echo "Warning: Samba installation failed, continuing..."
|
||||
|
||||
# Add Primary share configuration
|
||||
if ! grep -q "\[Primary\]" /etc/samba/smb.conf; then
|
||||
cat >> /etc/samba/smb.conf << SAMBA_CONFIG
|
||||
# Configure Samba share for primary drive
|
||||
if command -v smbd &> /dev/null; then
|
||||
echo ""
|
||||
echo "Configuring Samba share for primary drive..."
|
||||
|
||||
# Backup existing config
|
||||
cp /etc/samba/smb.conf /etc/samba/smb.conf.backup-$(date +%Y%m%d-%H%M%S)
|
||||
|
||||
# Add Primary share configuration
|
||||
if ! grep -q "\[Primary\]" /etc/samba/smb.conf; then
|
||||
cat >> /etc/samba/smb.conf << SAMBA_CONFIG
|
||||
|
||||
# Primary drive share - added by post-install script
|
||||
[Primary]
|
||||
@@ -274,33 +285,36 @@ if command -v smbd &> /dev/null; then
|
||||
create mask = 0775
|
||||
directory mask = 0775
|
||||
SAMBA_CONFIG
|
||||
echo "✓ Added [Primary] share to Samba configuration"
|
||||
echo "✓ Added [Primary] share to Samba configuration"
|
||||
else
|
||||
echo "Samba [Primary] share already configured, skipping..."
|
||||
fi
|
||||
|
||||
# Add Samba user
|
||||
echo ""
|
||||
echo "━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━"
|
||||
echo "SAMBA PASSWORD SETUP"
|
||||
echo "━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━"
|
||||
echo ""
|
||||
echo "Set a password for Samba file sharing access."
|
||||
echo "Tip: Using the same password as your system login is convenient."
|
||||
echo ""
|
||||
smbpasswd -a "$ACTUAL_USER"
|
||||
|
||||
# Enable and restart Samba services
|
||||
systemctl enable smbd nmbd || echo "Warning: Failed to enable Samba services"
|
||||
systemctl restart smbd nmbd || echo "Warning: Failed to restart Samba services"
|
||||
|
||||
echo ""
|
||||
echo "✓ Samba configured successfully"
|
||||
echo " Share name: Primary"
|
||||
echo " Path: $ACTUAL_HOME/drives/primary"
|
||||
echo " Access: \\\\$(hostname)\\Primary (Windows) or smb://$(hostname)/Primary (Mac/Linux)"
|
||||
else
|
||||
echo "Samba [Primary] share already configured, skipping..."
|
||||
echo "✗ Samba installation failed, skipping configuration"
|
||||
fi
|
||||
|
||||
# Add Samba user
|
||||
echo ""
|
||||
echo "━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━"
|
||||
echo "SAMBA PASSWORD SETUP"
|
||||
echo "━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━"
|
||||
echo ""
|
||||
echo "Set a password for Samba file sharing access."
|
||||
echo "Tip: Using the same password as your system login is convenient."
|
||||
echo ""
|
||||
smbpasswd -a "$ACTUAL_USER"
|
||||
|
||||
# Enable and restart Samba services
|
||||
systemctl enable smbd nmbd || echo "Warning: Failed to enable Samba services"
|
||||
systemctl restart smbd nmbd || echo "Warning: Failed to restart Samba services"
|
||||
|
||||
echo ""
|
||||
echo "✓ Samba configured successfully"
|
||||
echo " Share name: Primary"
|
||||
echo " Path: $ACTUAL_HOME/drives/primary"
|
||||
echo " Access: \\\\$(hostname)\\Primary (Windows) or smb://$(hostname)/Primary (Mac/Linux)"
|
||||
else
|
||||
echo "✗ Samba installation failed, skipping configuration"
|
||||
echo "Skipping Samba installation."
|
||||
fi
|
||||
|
||||
# Install NetBird
|
||||
@@ -341,110 +355,125 @@ if [ -f /tmp/rustdesk.deb ]; then
|
||||
rm /tmp/rustdesk.deb
|
||||
fi
|
||||
|
||||
# Create rclone backup script and instructions
|
||||
echo ""
|
||||
echo "Setting up rclone backup configuration..."
|
||||
echo ""
|
||||
|
||||
# Create backup script directory
|
||||
mkdir -p /usr/local/bin/backup-scripts
|
||||
|
||||
# Create mount point directories
|
||||
echo ""
|
||||
echo "Creating mount point directories in $ACTUAL_HOME/drives/..."
|
||||
mkdir -p "$ACTUAL_HOME/drives/primary"
|
||||
mkdir -p "$ACTUAL_HOME/drives/backup1"
|
||||
mkdir -p "$ACTUAL_HOME/drives/backup2"
|
||||
chown -R "$ACTUAL_USER:$ACTUAL_USER" "$ACTUAL_HOME/drives"
|
||||
|
||||
# Rclone Split Backup System (Optional)
|
||||
echo ""
|
||||
echo "━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━"
|
||||
echo "DRIVE SETUP - Mount your drives"
|
||||
echo "RCLONE SPLIT BACKUP SYSTEM (Optional)"
|
||||
echo "━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━"
|
||||
echo ""
|
||||
echo "Available block devices:"
|
||||
echo "This sets up a split backup system using rclone:"
|
||||
echo " - Creates mount points for primary + 2 backup drives"
|
||||
echo " - Installs backup script that splits data across backup drives"
|
||||
echo " - Optionally configures automatic daily backups"
|
||||
echo ""
|
||||
lsblk -o NAME,SIZE,TYPE,FSTYPE,MOUNTPOINT,LABEL
|
||||
echo "Useful when: Primary drive (e.g., 4TB) > individual backup drives (e.g., 2TB each)"
|
||||
echo ""
|
||||
read -p "Set up rclone split backup system? (y/n): " SETUP_BACKUP
|
||||
|
||||
read -p "Do you want to mount drives now? (y/n): " MOUNT_NOW
|
||||
if [ "$SETUP_BACKUP" = "y" ] || [ "$SETUP_BACKUP" = "Y" ]; then
|
||||
echo ""
|
||||
echo "Setting up rclone backup configuration..."
|
||||
echo ""
|
||||
|
||||
if [ "$MOUNT_NOW" = "y" ] || [ "$MOUNT_NOW" = "Y" ]; then
|
||||
# Create backup script directory
|
||||
mkdir -p /usr/local/bin/backup-scripts
|
||||
|
||||
# Create mount point directories
|
||||
echo ""
|
||||
echo "Enter device paths (e.g., /dev/sdb1) or leave blank to skip"
|
||||
echo "Creating mount point directories in $ACTUAL_HOME/drives/..."
|
||||
mkdir -p "$ACTUAL_HOME/drives/primary"
|
||||
mkdir -p "$ACTUAL_HOME/drives/backup1"
|
||||
mkdir -p "$ACTUAL_HOME/drives/backup2"
|
||||
chown -R "$ACTUAL_USER:$ACTUAL_USER" "$ACTUAL_HOME/drives"
|
||||
|
||||
echo ""
|
||||
|
||||
read -p "Primary drive device (e.g., /dev/sdb1): " PRIMARY_DEV
|
||||
read -p "Backup1 drive device (e.g., /dev/sdc1): " BACKUP1_DEV
|
||||
read -p "Backup2 drive device (e.g., /dev/sdd1): " BACKUP2_DEV
|
||||
|
||||
# Mount primary
|
||||
if [ -n "$PRIMARY_DEV" ] && [ -b "$PRIMARY_DEV" ]; then
|
||||
echo "Mounting $PRIMARY_DEV to $ACTUAL_HOME/drives/primary..."
|
||||
mount "$PRIMARY_DEV" "$ACTUAL_HOME/drives/primary" && echo "✓ Primary mounted" || echo "✗ Failed to mount primary"
|
||||
fi
|
||||
|
||||
# Mount backup1
|
||||
if [ -n "$BACKUP1_DEV" ] && [ -b "$BACKUP1_DEV" ]; then
|
||||
echo "Mounting $BACKUP1_DEV to $ACTUAL_HOME/drives/backup1..."
|
||||
mount "$BACKUP1_DEV" "$ACTUAL_HOME/drives/backup1" && echo "✓ Backup1 mounted" || echo "✗ Failed to mount backup1"
|
||||
fi
|
||||
|
||||
# Mount backup2
|
||||
if [ -n "$BACKUP2_DEV" ] && [ -b "$BACKUP2_DEV" ]; then
|
||||
echo "Mounting $BACKUP2_DEV to $ACTUAL_HOME/drives/backup2..."
|
||||
mount "$BACKUP2_DEV" "$ACTUAL_HOME/drives/backup2" && echo "✓ Backup2 mounted" || echo "✗ Failed to mount backup2"
|
||||
fi
|
||||
|
||||
echo "━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━"
|
||||
echo "DRIVE SETUP - Mount your drives"
|
||||
echo "━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━"
|
||||
echo ""
|
||||
echo "Current mounts:"
|
||||
df -h | grep "$ACTUAL_HOME/drives"
|
||||
|
||||
echo "Available block devices:"
|
||||
echo ""
|
||||
read -p "Add these mounts to /etc/fstab for automatic mounting at boot? (y/n): " ADD_FSTAB
|
||||
|
||||
if [ "$ADD_FSTAB" = "y" ] || [ "$ADD_FSTAB" = "Y" ]; then
|
||||
lsblk -o NAME,SIZE,TYPE,FSTYPE,MOUNTPOINT,LABEL
|
||||
echo ""
|
||||
|
||||
read -p "Do you want to mount drives now? (y/n): " MOUNT_NOW
|
||||
|
||||
if [ "$MOUNT_NOW" = "y" ] || [ "$MOUNT_NOW" = "Y" ]; then
|
||||
echo ""
|
||||
echo "Enter device paths (e.g., /dev/sdb1) or leave blank to skip"
|
||||
echo ""
|
||||
echo "Adding entries to /etc/fstab..."
|
||||
cp /etc/fstab /etc/fstab.backup-$(date +%Y%m%d-%H%M%S)
|
||||
|
||||
if [ -n "$PRIMARY_DEV" ] && [ -b "$PRIMARY_DEV" ]; then
|
||||
PRIMARY_UUID=$(blkid -s UUID -o value "$PRIMARY_DEV")
|
||||
if [ -n "$PRIMARY_UUID" ]; then
|
||||
echo "UUID=$PRIMARY_UUID $ACTUAL_HOME/drives/primary auto defaults 0 2" >> /etc/fstab
|
||||
echo "✓ Added primary to fstab"
|
||||
fi
|
||||
fi
|
||||
|
||||
if [ -n "$BACKUP1_DEV" ] && [ -b "$BACKUP1_DEV" ]; then
|
||||
BACKUP1_UUID=$(blkid -s UUID -o value "$BACKUP1_DEV")
|
||||
if [ -n "$BACKUP1_UUID" ]; then
|
||||
echo "UUID=$BACKUP1_UUID $ACTUAL_HOME/drives/backup1 auto defaults 0 2" >> /etc/fstab
|
||||
echo "✓ Added backup1 to fstab"
|
||||
fi
|
||||
fi
|
||||
|
||||
if [ -n "$BACKUP2_DEV" ] && [ -b "$BACKUP2_DEV" ]; then
|
||||
BACKUP2_UUID=$(blkid -s UUID -o value "$BACKUP2_DEV")
|
||||
if [ -n "$BACKUP2_UUID" ]; then
|
||||
echo "UUID=$BACKUP2_UUID $ACTUAL_HOME/drives/backup2 auto defaults 0 2" >> /etc/fstab
|
||||
echo "✓ Added backup2 to fstab"
|
||||
fi
|
||||
fi
|
||||
|
||||
echo "✓ Backup of original fstab saved with timestamp"
|
||||
fi
|
||||
else
|
||||
echo ""
|
||||
echo "Skipping drive mounting. You can mount manually later."
|
||||
echo "Mount points created at:"
|
||||
echo " $ACTUAL_HOME/drives/primary"
|
||||
echo " $ACTUAL_HOME/drives/backup1"
|
||||
echo " $ACTUAL_HOME/drives/backup2"
|
||||
fi
|
||||
|
||||
# Create example backup script with correct paths
|
||||
cat > /usr/local/bin/backup-scripts/rclone-backup.sh << BACKUP_SCRIPT
|
||||
read -p "Primary drive device (e.g., /dev/sdb1): " PRIMARY_DEV
|
||||
read -p "Backup1 drive device (e.g., /dev/sdc1): " BACKUP1_DEV
|
||||
read -p "Backup2 drive device (e.g., /dev/sdd1): " BACKUP2_DEV
|
||||
|
||||
# Mount primary
|
||||
if [ -n "$PRIMARY_DEV" ] && [ -b "$PRIMARY_DEV" ]; then
|
||||
echo "Mounting $PRIMARY_DEV to $ACTUAL_HOME/drives/primary..."
|
||||
mount "$PRIMARY_DEV" "$ACTUAL_HOME/drives/primary" && echo "✓ Primary mounted" || echo "✗ Failed to mount primary"
|
||||
fi
|
||||
|
||||
# Mount backup1
|
||||
if [ -n "$BACKUP1_DEV" ] && [ -b "$BACKUP1_DEV" ]; then
|
||||
echo "Mounting $BACKUP1_DEV to $ACTUAL_HOME/drives/backup1..."
|
||||
mount "$BACKUP1_DEV" "$ACTUAL_HOME/drives/backup1" && echo "✓ Backup1 mounted" || echo "✗ Failed to mount backup1"
|
||||
fi
|
||||
|
||||
# Mount backup2
|
||||
if [ -n "$BACKUP2_DEV" ] && [ -b "$BACKUP2_DEV" ]; then
|
||||
echo "Mounting $BACKUP2_DEV to $ACTUAL_HOME/drives/backup2..."
|
||||
mount "$BACKUP2_DEV" "$ACTUAL_HOME/drives/backup2" && echo "✓ Backup2 mounted" || echo "✗ Failed to mount backup2"
|
||||
fi
|
||||
|
||||
echo ""
|
||||
echo "Current mounts:"
|
||||
df -h | grep "$ACTUAL_HOME/drives"
|
||||
|
||||
echo ""
|
||||
read -p "Add these mounts to /etc/fstab for automatic mounting at boot? (y/n): " ADD_FSTAB
|
||||
|
||||
if [ "$ADD_FSTAB" = "y" ] || [ "$ADD_FSTAB" = "Y" ]; then
|
||||
echo ""
|
||||
echo "Adding entries to /etc/fstab..."
|
||||
cp /etc/fstab /etc/fstab.backup-$(date +%Y%m%d-%H%M%S)
|
||||
|
||||
if [ -n "$PRIMARY_DEV" ] && [ -b "$PRIMARY_DEV" ]; then
|
||||
PRIMARY_UUID=$(blkid -s UUID -o value "$PRIMARY_DEV")
|
||||
if [ -n "$PRIMARY_UUID" ]; then
|
||||
echo "UUID=$PRIMARY_UUID $ACTUAL_HOME/drives/primary auto defaults 0 2" >> /etc/fstab
|
||||
echo "✓ Added primary to fstab"
|
||||
fi
|
||||
fi
|
||||
|
||||
if [ -n "$BACKUP1_DEV" ] && [ -b "$BACKUP1_DEV" ]; then
|
||||
BACKUP1_UUID=$(blkid -s UUID -o value "$BACKUP1_DEV")
|
||||
if [ -n "$BACKUP1_UUID" ]; then
|
||||
echo "UUID=$BACKUP1_UUID $ACTUAL_HOME/drives/backup1 auto defaults 0 2" >> /etc/fstab
|
||||
echo "✓ Added backup1 to fstab"
|
||||
fi
|
||||
fi
|
||||
|
||||
if [ -n "$BACKUP2_DEV" ] && [ -b "$BACKUP2_DEV" ]; then
|
||||
BACKUP2_UUID=$(blkid -s UUID -o value "$BACKUP2_DEV")
|
||||
if [ -n "$BACKUP2_UUID" ]; then
|
||||
echo "UUID=$BACKUP2_UUID $ACTUAL_HOME/drives/backup2 auto defaults 0 2" >> /etc/fstab
|
||||
echo "✓ Added backup2 to fstab"
|
||||
fi
|
||||
fi
|
||||
|
||||
echo "✓ Backup of original fstab saved with timestamp"
|
||||
fi
|
||||
else
|
||||
echo ""
|
||||
echo "Skipping drive mounting. You can mount manually later."
|
||||
echo "Mount points created at:"
|
||||
echo " $ACTUAL_HOME/drives/primary"
|
||||
echo " $ACTUAL_HOME/drives/backup1"
|
||||
echo " $ACTUAL_HOME/drives/backup2"
|
||||
fi
|
||||
|
||||
# Create example backup script with correct paths
|
||||
cat > /usr/local/bin/backup-scripts/rclone-backup.sh << BACKUP_SCRIPT
|
||||
#!/bin/bash
|
||||
|
||||
################################################################################
|
||||
@@ -596,10 +625,10 @@ backup_to_drive "\$BACKUP2" "Backup Drive 2" "\${BACKUP2_DIRS[@]}"
|
||||
echo "=== Backup Completed: \$(date) ===" | tee -a "\$LOG"
|
||||
BACKUP_SCRIPT
|
||||
|
||||
chmod +x /usr/local/bin/backup-scripts/rclone-backup.sh
|
||||
chmod +x /usr/local/bin/backup-scripts/rclone-backup.sh
|
||||
|
||||
# Create systemd service for automatic backups (optional)
|
||||
cat > /etc/systemd/system/rclone-backup.service << 'SERVICE'
|
||||
# Create systemd service for automatic backups (optional)
|
||||
cat > /etc/systemd/system/rclone-backup.service << 'SERVICE'
|
||||
[Unit]
|
||||
Description=Rclone Backup Service
|
||||
After=network.target
|
||||
@@ -610,8 +639,8 @@ ExecStart=/usr/local/bin/backup-scripts/rclone-backup.sh
|
||||
User=root
|
||||
SERVICE
|
||||
|
||||
# Create systemd timer for daily backups at 2 AM (optional)
|
||||
cat > /etc/systemd/system/rclone-backup.timer << 'TIMER'
|
||||
# Create systemd timer for daily backups at 2 AM (optional)
|
||||
cat > /etc/systemd/system/rclone-backup.timer << 'TIMER'
|
||||
[Unit]
|
||||
Description=Daily Rclone Backup Timer
|
||||
Requires=rclone-backup.service
|
||||
@@ -625,9 +654,11 @@ Persistent=true
|
||||
WantedBy=timers.target
|
||||
TIMER
|
||||
|
||||
echo "✓ Rclone backup script created at /usr/local/bin/backup-scripts/rclone-backup.sh"
|
||||
echo "✓ Systemd service/timer created (disabled by default)"
|
||||
|
||||
echo "✓ Rclone backup script created at /usr/local/bin/backup-scripts/rclone-backup.sh"
|
||||
echo "✓ Systemd service/timer created (disabled by default)"
|
||||
else
|
||||
echo "Skipping rclone backup system setup."
|
||||
fi
|
||||
|
||||
# Full system upgrade
|
||||
echo ""
|
||||
@@ -644,13 +675,17 @@ echo ""
|
||||
echo "=== Installation Complete! ==="
|
||||
echo ""
|
||||
echo "Installed Software:"
|
||||
echo " ✓ net-tools, ncdu, git, curl, wget, vim, htop, tree, zip/unzip"
|
||||
echo " ✓ rclone - Backup/sync tool"
|
||||
echo " ✓ net-tools, ncdu, git, curl, wget, vim, htop, tree, zip/unzip, rclone"
|
||||
echo " ✓ OpenSSH Server - SSH remote access"
|
||||
echo " ✓ Samba - File sharing (Primary drive shared)"
|
||||
echo " ✓ Docker Engine + Docker Compose"
|
||||
if [ "$INSTALL_SAMBA" = "y" ] || [ "$INSTALL_SAMBA" = "Y" ]; then
|
||||
echo " ✓ Samba - File sharing (Primary drive shared)"
|
||||
fi
|
||||
echo " ✓ NetBird - Mesh VPN"
|
||||
echo " ✓ RustDesk - Remote desktop"
|
||||
if [ "$SETUP_BACKUP" = "y" ] || [ "$SETUP_BACKUP" = "Y" ]; then
|
||||
echo " ✓ Rclone split backup system configured"
|
||||
fi
|
||||
echo ""
|
||||
echo "━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━"
|
||||
echo "SSH AUTHENTICATION SETUP"
|
||||
@@ -702,6 +737,7 @@ echo " ✓ Just GitHub or just Launchpad"
|
||||
echo " ✓ Just NetBird SSH"
|
||||
echo " ✓ None (password auth only - if no keys imported)"
|
||||
echo ""
|
||||
if [ "$SETUP_BACKUP" = "y" ] || [ "$SETUP_BACKUP" = "Y" ]; then
|
||||
echo "━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━"
|
||||
echo "RCLONE BACKUP SETUP - Exact Drive Mirroring"
|
||||
echo "━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━"
|
||||
@@ -912,21 +948,25 @@ echo " rclone check $ACTUAL_HOME/drives/primary/documents \\"
|
||||
echo " $ACTUAL_HOME/drives/backup1/documents \\"
|
||||
echo " --checksum --one-way"
|
||||
echo ""
|
||||
fi
|
||||
|
||||
echo "━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━"
|
||||
echo "OTHER IMPORTANT NOTES"
|
||||
echo "━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━"
|
||||
echo ""
|
||||
echo " Samba File Sharing:"
|
||||
if command -v smbd &> /dev/null && grep -q "\[Primary\]" /etc/samba/smb.conf 2>/dev/null; then
|
||||
echo " ✓ Share 'Primary' is accessible at:"
|
||||
echo " Windows: \\\\$(hostname)\\Primary"
|
||||
echo " Mac/Linux: smb://$(hostname)/Primary"
|
||||
echo " • Username: $ACTUAL_USER"
|
||||
echo " • Use the Samba password you just set"
|
||||
echo ""
|
||||
else
|
||||
echo " Not configured (Samba installation may have failed)"
|
||||
echo ""
|
||||
if [ "$INSTALL_SAMBA" = "y" ] || [ "$INSTALL_SAMBA" = "Y" ]; then
|
||||
echo " Samba File Sharing:"
|
||||
if command -v smbd &> /dev/null && grep -q "\[Primary\]" /etc/samba/smb.conf 2>/dev/null; then
|
||||
echo " ✓ Share 'Primary' is accessible at:"
|
||||
echo " Windows: \\\\$(hostname)\\Primary"
|
||||
echo " Mac/Linux: smb://$(hostname)/Primary"
|
||||
echo " • Username: $ACTUAL_USER"
|
||||
echo " • Use the Samba password you just set"
|
||||
echo ""
|
||||
else
|
||||
echo " ✗ Installation may have failed - check 'systemctl status smbd'"
|
||||
echo ""
|
||||
fi
|
||||
fi
|
||||
echo " Docker: Log out and back in for group membership to take effect"
|
||||
echo ""
|
||||
|
||||
Reference in New Issue
Block a user