It never worked reliably in the legacy script, and the modular tool
already covers the same outcome more reliably as two already-tested
pieces run back to back: Complete Uninstall (Core Settings), then
./install.sh again to provision fresh. No code changes - nothing was
ever built for it in the modular tool, this just stops carrying it in
docs/comments as a pending gap.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VfsFSoRqfbRG7XAg5RoE7e
The legacy Upgrade re-extracted main.js/preload.js/etc from its own
heredocs on every run - a mechanism the modular tool has no equivalent
of now that kiosk-app/ and provision/files/ are real files in the git
checkout. The new Advanced -> Upgrade is `git pull` (only after a
clean-tree check, and only as a fast-forward - never an automatic
merge) followed by re-running the same packages/kiosk-app/display/
firewall/power-management steps lib/provision.sh already has for a
fresh install, reused rather than reimplemented. Also offers an
on-demand Electron version check via the existing action_update_electron,
since Electron isn't versioned by this repo.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VfsFSoRqfbRG7XAg5RoE7e
Until now ./install.sh only managed an already-installed kiosk;
ubuntu-based-kiosk.sh was still the only path from a bare Ubuntu Server
box to a running one. install.sh now provisions from scratch too:
packages, kiosk user, Node.js/Electron, LightDM+Openbox autologin,
audio/video/HDMI/power-button hardware setup, and the firewall, then
hands off to the already-migrated Core Settings/Advanced menus for
initial configuration instead of reimplementing that logic again.
- lib/provision.sh: the new provisioning flow, built mostly by calling
existing menus (core_settings_menu, emergency hotspot, virtual
consoles) - cuts it to ~300 lines against the legacy script's
~4,000-line first_time_install().
- lib/electron.sh: electron_install_binary() extracted out of
menus/advanced_electron.sh so provisioning and the existing "Fix
blank screen" action share one implementation.
- kiosk-app/ and provision/files/: the Electron app source and every
system template file, extracted byte-for-byte out of
ubuntu-based-kiosk.sh's heredocs into real files.
- Found and fixed a bash set -e gotcha along the way: testing a
multi-statement function as an if-condition (`if ! some_func; then`)
silently exempts everything inside that function from set -e for the
duration of the call. Fixed in the new provisioning code and in
menus/advanced_electron.sh's pre-existing repair action, which had
the same shape.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VfsFSoRqfbRG7XAg5RoE7e
menus/fleet_profile.sh -> menus/clone_settings.sh. Same functionality
(export/apply portable config.json settings between kiosks); renamed
the file, every function, the menu label, and the on-disk default
profile filename to match. No behavior change.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VfsFSoRqfbRG7XAg5RoE7e
New menus/fleet_profile.sh (Advanced), for the "set up one kiosk, then
stand up a dozen more like it" use case. Not a port of the legacy
Export/Import Settings - a narrower, deliberately-scoped feature:
- Export: writes config.json's portable fields (sites, display/touch/
navigation, lockout, password protection) plus a list of addons
present at export time to a JSON profile file.
- Apply: merges those fields onto a target kiosk's config.json (same
merge-not-replace pattern as save_config, so the target's own fields
survive untouched) and prints a checklist of which listed addons are/
aren't installed on the target.
Deliberately excludes machine-bound credentials rather than silently
mishandling them: Authelia's encrypted password is keyed off
/etc/machine-id and decrypts to garbage elsewhere; a WireGuard private
key is a device identity, reusing one across machines is a peer
conflict; most Asterisk PBXes reject duplicate registrations to the
same extension. Apply prints all three as an explicit "needs a human"
checklist. Non-interactive addon installation (for a fully scriptable
fleet rollout) is a deliberate follow-up, not part of this MVP.
Full command-level stubbed test suite covering export (site/setting
content, Authelia stripped, addon detection) and apply (merge
correctness, target's own Authelia preserved, bad path/invalid JSON
handled cleanly). Full 20-suite regression + real end-to-end menu
navigation via install.sh all pass.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VfsFSoRqfbRG7XAg5RoE7e
New menus/complete_uninstall.sh (Core Settings), the last of the
"destructive trio". Rather than re-implementing every addon's teardown
a second time (the legacy shape), it composes the *_do_uninstall
helpers each addon already has - if an addon's removal logic changes,
Complete Uninstall picks it up automatically.
Every addon menu with an uninstall action (CUPS, VNC, WireGuard,
Tailscale, Netbird, LMS, Squeezelite, Asterisk Intercom) plus
power_schedule's "remove all schedules" and Emergency Hotspot's disable
action were each split into a confirm-and-call wrapper (unchanged from
the user's perspective) and a silent do-the-removal helper that both
the wrapper and Complete Uninstall call.
Bug fix found while composing these: several *_do_uninstall helpers
(CUPS's apt autoremove/apt clean, VNC/WireGuard/Tailscale/Netbird's apt
remove) had a bare, unguarded apt call as their second-to-last
statement. Previously this only risked aborting that one menu action if
the package was already gone. Composed together as sequential calls
inside Complete Uninstall, the same failure would have silently
truncated the entire uninstall sequence partway through. Guarded all of
them with `|| true`.
Non-addon teardown (kiosk user/files, Node.js, LightDM/Openbox,
remaining systemd units/scripts, polkit rules, re-enabling virtual
consoles, final package cleanup) stays inline in
menus/complete_uninstall.sh, since no single addon owns those paths.
Upgrade and Full Reinstall stay in ubuntu-based-kiosk.sh only - both
are coupled to its own heredoc self-extraction of main.js/preload.js/
etc, which has no modular equivalent yet.
Full command-level stubbed test suite exercising the full 12-step
teardown, confirmation-text validation, and reboot prompt. Full
19-suite regression + real end-to-end menu navigation via install.sh
all pass.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VfsFSoRqfbRG7XAg5RoE7e
New in install.sh's Advanced menu, alongside Diagnostics:
- menus/advanced_electron.sh: "Electron Maintenance" - the legacy
"Manual Electron Update" and "Fix Blank Screen" combined into one
submenu, sharing the binary-repair logic (electron_install_binary).
- menus/advanced_factory_reset.sh: "Factory Reset" - wipes config.json
back to defaults only; addons are untouched.
- menus/advanced_virtual_consoles.sh: "Virtual Consoles" - toggles
Ctrl+Alt+F1-F8 terminal login access.
- menus/advanced_emergency_hotspot.sh: "Emergency Hotspot" - auto-starts
a WiFi hotspot if no internet is detected 60 seconds after boot. Its
own runtime script and systemd unit now go through $BIN_DIR/
$SYSTEMD_DIR like every other addon's own files, instead of the
legacy's hardcoded /usr/local/bin and /etc/systemd/system.
That covers 8 of the legacy Advanced menu's 12 entries. Not migrated
this round: Export/Import Settings (pending a decision on rebuilding it
around actual paths vs. a hardcoded step list, or whether the future
web UI replaces the need for it) and Fix Squeezelite Audio (small
enough it may fold into the LMS addon instead of staying standalone).
Full command-level stubbed test suite per file, including set -e safety
checks (declined/failed paths never crash the session) and content
verification for every written file. Full 18-suite regression + real
end-to-end menu navigation via install.sh all pass.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VfsFSoRqfbRG7XAg5RoE7e
New menus/addon_asterisk_intercom.sh, wired into install.sh's Addons
menu. The legacy addon offered Client Only (Baresip SIP client), Server
Only, and Full (server + client), where Server/Full downloaded and ran
a third-party installer from a separate "Easy Asterisk" repository to
stand up a whole Asterisk PBX. That repository has since gone through a
major rework upstream, so this migration drops the PBX-install path
entirely: the addon now only installs Baresip and registers this kiosk
as a SIP extension against an Asterisk server the user already has
running elsewhere. It never installs or manages Asterisk itself. The
legacy script's own three-option version is untouched, same as every
other migrated menu.
Dropped the legacy client path's dependency on the Easy Asterisk repo's
GitHub API for version tracking - now reads the real installed baresip
package version via dpkg instead. Added an uninstall option, which the
legacy addon never had at all.
Bug fix found while testing: an unguarded `ver=$(baresip_installed_version)`
assignment crashed the whole session under set -e the first time status
was checked before Baresip was installed (dpkg-query legitimately fails
when the package isn't there). Guarded with `|| true`.
Full command-level stubbed test suite covering configure (manual/auto-
answer, TLS port bump, apt-install failure) and uninstall (keep/purge
config) for both fresh and already-configured states. Full 13-suite
regression + real end-to-end menu navigation via install.sh all pass.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VfsFSoRqfbRG7XAg5RoE7e
New menus/addon_lms_squeezelite.sh: install/reconfigure/uninstall for an
LMS (Lyrion/Logitech Media Server) server and a Squeezelite player,
wired into install.sh's Addons menu. Squeezelite's own start script and
systemd unit now go through $BIN_DIR/$SYSTEMD_DIR like every other
addon instead of hardcoded /usr/local/bin and /etc/systemd/system; LMS's
own apt repo/GPG key/ufw rules stay at their real fixed system paths,
same approach as CUPS.
Fixed a real unguarded-pipeline bug from the legacy install_lms():
`sudo systemctl enable "$service_name" 2>&1 | tee ...` made the exit
status depend on tee (always 0) instead of systemctl enable, silently
swallowing real enable/start failures. Now uses enable_and_start_units().
Fixed is_service_enabled() (shared helper, backported into the legacy
script too): its list-unit-files pre-check never matched a bare service
name, so it always fell through to "not enabled" regardless of the real
state. Dropped the dead pre-check.
Full command-level stubbed test suite covering install/reconfigure/
uninstall for both LMS and Squeezelite, including the repo-vs-fallback-
download path, undetectable-service-name path, and enable/start-failure
path. Full 12-suite regression + real end-to-end menu navigation via
install.sh all pass.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VfsFSoRqfbRG7XAg5RoE7e
Third and biggest Addon migrated: menus/addon_remote_access.sh - VNC
(x11vnc), WireGuard, Tailscale, and Netbird, each with its own install/
connect/status/uninstall flow. Same risk class as CUPS (real apt
packages, real system state) but broader in scope: Tailscale and
Netbird install via the vendors' own documented `curl -fsSL <url> | sh`
method, preserved exactly as-is rather than redesigned.
- lib/config.sh: new $WIREGUARD_DIR, same pattern as $SYSTEMD_DIR/
$BIN_DIR/etc - nothing in this file hardcodes /etc/wireguard.
- lib/menu.sh: promoted power_schedule.sh's enable_and_start_timers()
to a shared enable_and_start_units() (works for services now too, not
just timers) - Remote Access needed the identical enable+start-with-
graceful-failure-reporting pattern for x11vnc and wg-quick@, so this
is fixed once and reused rather than duplicated a second time.
power_schedule.sh's four call sites renamed to match.
Found and fixed a real framework-level bug while building this file:
run_menu()'s *handler* call has been `|| true`-guarded since v2.1.0,
but the *status function* call (`"$status_func"` on its own line) was
still completely bare. A status function's entire job is read-only
display, but if it contains so much as a pipeline whose grep matches
nothing - which pipefail turns into a pipeline failure even though the
actual last command in it (e.g. sed) succeeds - that bare call would
crash the *entire session*, not just fail to show status text. Found
while writing wireguard_status()'s `sudo wg show | grep ... | sed ...`
and deliberately verifying its exact failure mode rather than assuming
run_menu already covered it. Fixed once in run_menu() itself
(lib/menu.sh), protecting every status function across every menu -
present and future - the same "fix once at the framework level"
pattern as the v2.1.0 handler fix.
Given the framework fix meant this class of bug had been silently
possible since v2.1.0, audited every existing status function across
every already-migrated menu for the same specific shape (a bare
`var=$(...)` assignment from a grep-based pipeline, not embedded in an
echo and not already guarded - embedded substitutions and if-condition
contexts are both already safe on their own). Found and fixed one real
instance in power_schedule_status(). menus/addon_remote_access.sh's own
two equivalent pipelines (wireguard_status, netbird_status) were
written with `|| true` from the start once the pattern was identified.
Verified:
- New scratch/stub test for addon_remote_access.sh, with curl stubbed
separately from sudo (Tailscale/Netbird's install scripts must never
reach the real network regardless of what sudo intercepts) and a
belt-and-suspenders `sh` stub in case anything got past curl: full
status/menu-builder coverage for all four sub-areas in their real,
unstubbed "not installed" state (none of the four tools exist in this
sandbox); VNC install/change-password/uninstall with systemd unit
content verified (correct $KIOSK_USER/$KIOSK_HOME substitution);
WireGuard install, paste-config (content written correctly to scratch
$WIREGUARD_DIR), and uninstall - including documenting a genuine
cat-until-EOF test-harness limitation (a redirected pipe's EOF is
permanent for the whole stream, unlike a real terminal's per-read
Ctrl+D, so only the config's *default* name is testable through
simple stdin redirection - inherent to the design, matches the legacy
script's identical `cat`-based approach, not a bug); Tailscale and
Netbird install/connect-interactive/connect-with-key/uninstall; and
all four cancel paths confirmed to make zero sudo calls.
- Full regression: re-ran all 11 prior scratch/stub suites after the
lib/menu.sh and power_schedule.sh changes - all still clean.
- End-to-end: ran the real install.sh as a genuine non-root, non-
"kiosk" user through Addons -> Remote Access -> all four sub-menus in
turn, each showing accurate real (unstubbed) "not installed" status,
selecting Install, declining the confirmation, and returning cleanly
- zero invalid-choice errors, clean exit code 0.
Per user decision: backport just the config-clobbering fix from v2.6.0
(lib/config.sh) into the legacy single-file installer's own
save_config(), independent of migrating the rest of that menu into
./install.sh.
The bug: save_config() rebuilt config.json from a fixed list of known
fields via `jq -n`, silently deleting anything it didn't know about -
specifically autheliaURL/autheliaUsername/autheliaEncryptedPassword,
written by configure_authelia()'s own careful `. + {...}` merge.
Configuring Authelia and then visiting Sites, Touch Controls,
Navigation, or Password Protection (all of which call save_config)
silently deleted the Authelia credentials. Real, currently-shipping
credential-loss bug, unrelated to whether the rest of that menu is ever
migrated - didn't need to wait for a full pass.
Fixed the same way as lib/config.sh: merge the known fields onto
whatever's already in config.json (`. + {...}`) instead of rebuilding
from nothing, with a `jq empty` validity check falling back to `{}` if
the existing file is missing or corrupt. This is a standalone fix to
one function only - nothing else about Sites/Touch/Navigation/Authelia
changed, and none of that is migrated by this commit.
Verified before touching the shipping copy: extracted the exact
save_config() function (now lines 3682-3805) into an isolated test
harness with stubbed dependencies (kiosk_user_exists, is_service_active,
log_success/warning), seeded a stub config.json with Authelia-style
fields via the same `. + {...}` merge configure_authelia() uses, called
save_config() a second time simulating a visit to an unrelated menu,
and confirmed the Authelia fields survive while an actual settings
change (duration 60 -> 90) still correctly takes effect. Also verified
the corrupt-JSON and missing-file edge cases don't crash the function.
Full syntax check on the whole 12,000+ line script, and the entire
modular test suite (11 scratch/stub suites), both still clean.
Second Addon migrated: menus/addon_authelia.sh (encrypted SSO
credentials, AES-256-CBC with a key derived from /etc/machine-id via
scrypt - same algorithm main.js decrypts with - plus the full
Dockerized server-side setup instructions, now viewable again later
without reconfiguring).
Investigating how to wire its three config.json fields (autheliaURL/
autheliaUsername/autheliaEncryptedPassword) into lib/config.sh surfaced
a real, currently-shipping bug that has nothing to do with Authelia
specifically: save_config() did a full `jq -n` rebuild of config.json
from a fixed list of known fields - identical to what the legacy
script's own save_config still does. The legacy configure_authelia()
writes its three fields via a careful `. + {...}` merge that preserves
everything else already in the file, but neither save_config knew those
fields existed - so the next time a user visited Sites, Touch Controls,
Navigation, or Password Protection (all of which call save_config),
their Authelia credentials were silently deleted. This bug already
existed in the shipped single-file installer; it was ported faithfully
into lib/config.sh's first version because no test happened to set an
untracked field before calling save_config.
Fixed in lib/config.sh: save_config now merges its known fields onto
whatever's already in config.json (jq `. + {...}`) instead of rebuilding
the file from nothing, with a `jq empty` validity check falling back to
`{}` if the existing file is missing or corrupt. Any field this tool
doesn't track - Authelia's three today, anything else a future addon
adds tomorrow - now survives automatically. autheliaURL/
autheliaUsername/autheliaEncryptedPassword are also tracked fields in
their own right now (load_existing_config/save_config), consistent with
every other config.json field this tool manages, giving Authelia both a
direct fix and the general safety net.
The equivalent bug still exists, unfixed, in ubuntu-based-kiosk.sh's own
save_config - noted in both that script's changelog and the Readme's
"Modular Management" section as an open question: whether to backport
just that one fix into the legacy script now, independent of the wider
migration, given it's a real credential-loss bug affecting the
currently-shipping installer today.
Verified:
- New dedicated test (test_save_merge.sh) proving the save_config fix
itself: seeded config.json with a simulated untracked field via the
same `. + {...}` merge Authelia's own code uses, called save_config
from an unrelated context (Sites deleting a tab), and confirmed the
untracked field survived while the tab deletion still correctly took
effect (not undone by the merge) - plus corrupt-JSON and
missing-file edge cases both handled without crashing.
- New scratch-config test for addon_authelia.sh using REAL encryption
(this sandbox has both Node and /etc/machine-id): configured with a
real password, then decrypted the stored ciphertext using main.js's
exact algorithm (independently reproduced in the test) and confirmed
it recovers the original password exactly - true interoperability,
not just "some ciphertext was produced." Also covered cancel paths,
clearing the configuration, the encryption-unavailable failure path,
and confirmed Authelia's config survives an unrelated Sites save.
- Full regression: re-ran all 9 prior scratch/stub test suites after
both the lib/config.sh changes - all still clean.
- End-to-end: ran the real install.sh as a genuine non-root, non-
"kiosk" user with a seeded minimal config.json, through Addons ->
Authelia -> Configure with a real URL/username/password -> confirmed
the resulting config.json on disk, and independently decrypted the
stored password for real using main.js's algorithm to confirm it
matches exactly. Clean exit code 0 throughout.
First Addon migrated: menus/addon_cups.sh (install, reconfigure for
network access, complete uninstall/purge). Different risk profile from
everything migrated so far - it genuinely mutates real system state
(apt install/remove --purge, /etc/cups, ufw) at fixed paths CUPS itself
doesn't let us relocate, unlike the systemd/cron/bin paths this project
already controls via $SYSTEMD_DIR etc. Only the polkit rule's directory
is parameterized ($POLKIT_DIR, lib/config.sh, since that one is ours to
place); everything else gets full command-level `sudo` stubbing in
every test - there is no scratch equivalent for a real apt-managed
subsystem's own file layout. Also added $BUILD_USER (the admin account
actually running the tool, as opposed to $KIOSK_USER) since CUPS needs
to grant it lpadmin group membership.
Restructured install.sh's top-level menu into Core Settings / Addons /
Advanced (matching the legacy tool) instead of one flat list, now that
Addons exists as its own category - cheap to do with one item in it,
much more annoying to retrofit once the flat list has fifteen.
Two bugs caught and fixed before they shipped:
- A "wait for CUPS to start" retry loop used a bare `cmd1 && cmd2 &&
break` as its body while "simplifying" the legacy script's `if cmd1
&& cmd2; then break; fi`. Being inside a loop doesn't protect a bare
&&/|| list from set -e - only if/while/until conditions and the
protected side of &&/|| do that - so the first command failing on an
early iteration (near-certain right after a fresh install, before
CUPS has actually started) would have crashed the entire session.
Restored the `if` form; noted the lesson in the file's own header
comment since it's a general trap, not CUPS-specific.
- Resolved real uncertainty, rather than assuming: how far does
run_menu's `handler || true` guard (v2.1.0) actually protect? Wrote a
minimal isolated test (a bare `false` three function calls deep,
called via `outer || true` at the top) and confirmed bash's errexit
exemption for the left side of `||` covers the *entire* evaluation,
arbitrarily deep through function calls - not just the immediately
invoked function. So the session-crash risk this project has been
chasing since v2.1.0 is already covered end-to-end by that one fix.
Per-statement guards (`|| true`, explicit `if`) still earn their keep
for a different reason: without them a deep failure bubbles silently
past the menu actually responsible for it to wherever the nearest
`|| true` happens to sit, which can be several menu levels above
where the user actually was - not a crash, but a confusing jump.
Verified:
- Full regression: re-ran every existing scratch-config/stub test suite
after the lib/config.sh change (new $BUILD_USER/$POLKIT_DIR) and
after the install.sh restructuring - all still clean.
- New scratch/stub test for addon_cups.sh: full state-machine coverage
(not installed -> decline -> install -> running -> reconfigure ->
stopped -> start -> uninstall decline -> uninstall confirm -> not
installed again) with every `sudo` call intercepted and only `rm`
targeting the scratch $POLKIT_DIR ever actually executed; confirmed
the polkit rule's content and that declining install makes zero sudo
calls. Added both apt-failure paths (update fails, install fails)
and confirmed the tool reports clearly and returns to the menu
instead of dying, exercising the exact bug class just fixed.
- End-to-end: ran the real install.sh as a genuine non-root, non-
"kiosk" user through the full new three-level structure - Core
Settings -> Sites -> back -> back, Addons -> CUPS -> declined install
(using this container's real, unstubbed dpkg check, correctly
reporting "not installed" and making no apt/systemctl calls) -> back
-> back, Advanced -> Diagnostics -> System status -> back -> back ->
Exit. Zero invalid-choice errors, clean exit code 0 throughout.
Deliberately skipped Upgrade/Full Reinstall/Complete Uninstall for now:
all three are large (130-250 lines), genuinely destructive (wipe/
reinstall the kiosk), and Upgrade specifically is coupled to the legacy
script's own self-extraction mechanism (it greps its own running source
for embedded heredocs to pull out main.js/preload.js) - there's no
modular equivalent to migrate it to yet, since those files don't exist
as separate assets outside the monolith. Migrated Diagnostics instead:
4 of the legacy Advanced menu's 12 items (System Status, View Logs,
Audio Diagnostics, Network Test), all read-only except one optional
"play a test sound?" prompt - a deliberate change of pace with no
destructive-action risk to design around, after Sites/WiFi/Power.
- lib/menu.sh: ported get_vpn_ips alongside get_ip_address.
- menus/diagnostics.sh: straight port, using $KIOSK_USER/$KIOSK_HOME
throughout instead of the legacy code's mix of the variable and a
hardcoded "kiosk" literal.
Bug fixed, same set -e-safety class as v2.1.0's run_menu fix and
v2.3.0's netplan/systemctl fixes, but a bigger batch this time: nearly
every diagnostic command here was a bare unguarded statement whose
*expected, common* failure - no lightdm running, no audio hardware, no
network, missing log files, ping/nslookup not even installed - would
have crashed the entire session instead of reporting "not found" and
continuing. A diagnostics tool has to be the most crash-proof code in
the project, since it exists to run when something is already broken.
Fixed at every call site: systemctl status | head, tail on lightdm's
log, journalctl, ping, nslookup, and three pactl-backed variable
assignments.
Also noted for future menus in this migration: writing `local var;` and
`var=$(cmd)` as separate statements (good practice, and how several
earlier real bugs were caught) removes an accidental safety net -
`local x=$(cmd)` on one line masks the substitution's exit code with
`local`'s own always-success status. Splitting them is correct, but
each split assignment needs an explicit `|| true` (or real fallback)
where failure is expected and non-fatal, rather than relying on that
masking by accident. Caught three instances of exactly this while
writing this file fresh, not just porting old bugs.
Verified:
- Full regression: re-ran every existing scratch-config/stub test suite
(sites, display, timezone/pin, lockout, power schedule + RTC, wifi) -
all still clean after the lib/menu.sh change.
- New test for diagnostics.sh, exercised mostly for real (no
destructive-mutation risk here, so minimal stubbing needed): system
status, all three log views (including the "no such file" paths for
lightdm log and electron log), full 8-step audio diagnostic with test
sound declined, and network test - all report gracefully instead of
crashing, confirmed by re-running after each fix until every bare
unguarded statement was accounted for.
- End-to-end: ran the real install.sh as a genuine non-root, non-
"kiosk" user, navigating Diagnostics -> System status -> View Logs ->
System journal -> Audio diagnostics (declined test sound) -> Network
test -> exit. Confirmed every diagnostic path completes and returns
to its menu cleanly (exit code 0) even with ping/nslookup missing and
no audio hardware/network present in this environment.
By far the riskiest menus migrated so far. Both can affect real system
state outside config.json in ways that are hard to reverse: WiFi
rewrites live netplan config and, over SSH, can disconnect the very
session configuring it; power scheduling can shut the physical machine
down and wake it via RTC.
- lib/config.sh: new $SYSTEMD_DIR/$CRON_D_DIR/$BIN_DIR/$NETPLAN_DIR,
same `: "${VAR:=default}"` pattern as $KIOSK_DIR. Nothing under
menus/ hardcodes /etc/systemd/system, /etc/cron.d, /usr/local/bin, or
/etc/netplan directly, so every test in this change points them at
scratch space instead of ever touching this sandbox's real systemd
units, cron, or network config.
- lib/menu.sh: ported get_ip_address (also fixing its "No IP" fallback,
which never actually fired before - `hostname -I | awk` always exits
0 even on empty output).
- menus/wifi.sh: apply_wifi_config split out from wifi_menu specifically
so tests can drive the netplan-writing logic without needing real
scan hardware. Preserves the legacy netplan backup, 60s SSH watchdog,
and restore-on-failure behavior exactly.
- menus/power_schedule.sh: power schedule (+ RTC wake), display
schedule, quiet hours, and an Electron reload timer (with its own
nested run_menu, mirroring the legacy configured/not-configured
dispatch), plus remove-all. Deliberately excludes the legacy
dispatcher's "Test schedules & system" - a shared diagnostics submenu
(audio/network/keyboard tests) that isn't specific to scheduling and
belongs with a future Advanced/Diagnostics migration instead.
Bugs found and fixed along the way, none papered over:
- The legacy dispatcher refused to open "Configure power schedule" at
all without RTC hardware, even though shutdown-only mode never needed
RTC. Now always available.
- None of the six HH:MM prompts across these menus (shutdown, wake,
display off/on, quiet start/end, custom Electron reload time) were
validated before - plain `read`, no format check. All now go through
ask_time.
- set -e safety (same class as the v2.1.0 run_menu fix), three more
instances: `ls *.yaml` when no netplan file exists still fails under
pipefail even with stderr silenced (masked in practice by cloud-init
usually leaving a file behind); the restore-and-reapply `netplan
apply` after an initial failure was a bare unguarded statement; and
`systemctl enable`/`start` after writing each of the four timer pairs
was unguarded too - caught only by testing in an environment without
a live systemd, but a real enable/start failure on actual hardware
(bad unit, daemon-reload skipped, ...) would hit the exact same crash.
Added a shared enable_and_start_timers() helper used at all four call
sites; all now report a clear warning and return to the menu instead
of taking the session down.
Testing discipline for this round, given the risk:
- No automated test calls the real netplan/nmcli/iw/wpa_cli/systemctl -
confirmed no WiFi tools or `wl*` interface exist in this sandbox, so
wifi_menu's own tools-check safely short-circuits before touching
anything; apply_wifi_config's actual YAML/backup/failure-recovery
logic is tested with sudo/netplan/get_ip_address stubbed instead.
- One stubbing pitfall caught and fixed in the test itself: `nohup sudo
bash "$watchdog" ... &` execs nohup as a real external binary, which
then execs the real sudo - a bash function stub named `sudo` does NOT
intercept that, only stubbing `nohup` itself does. Verified via pgrep
that no real watchdog process or `sleep 60` was ever spawned.
- power_schedule.sh tested with SYSTEMD_DIR/CRON_D_DIR/BIN_DIR pointed
at scratch dirs and only `sudo systemctl` stubbed (tee/rm/chmod/cp
left real, since they only ever touch scratch paths): full lifecycle
for all four schedule types plus remove-all, the RTC-available branch
(including the wake-time-before-shutdown-time hour/day wraparound
arithmetic) via a stubbed rtc_wake_available, and the new
enable_and_start_timers failure path via a stub that fails `enable`
specifically.
- End-to-end: ran the real install.sh as a genuine non-root, non-
"kiosk" user for both menus. WiFi correctly short-circuits on missing
tools without crashing. Power/Display/Quiet Hours (SYSTEMD_DIR/
CRON_D_DIR/BIN_DIR redirected to scratch space) configured all four
schedule types in sequence including the nested Electron Reload menu,
survived four consecutive real "systemctl enable/start failed"
warnings (this container has no live systemd) without the session
dying, then removed everything - confirmed the scratch dirs ended up
empty and config.json was never touched (correctly out of scope for
this menu).
Fifth menu migrated onto lib/menu.sh + lib/config.sh: menus/lockout.sh
covers enable/disable, changing the password, inactivity timeout, daily
lock time, and boot password. The password is SHA-256 hashed before
it's ever assigned to LOCKOUT_PASSWORD (matching main.js's comparison
logic) - verified by test that the stored value is the correct hash and
never plaintext.
Rewrote the legacy configure_password_protection's linear "ask
everything, confirm save at the end" wizard as the same immediate-save
pattern used by every other migrated menu: each action (change
password, change timeout, toggle boot password, ...) is a complete,
standalone change, consistent with Sites/Display/Timezone/Hidden PIN.
LOCKOUT_ACTIVE_START/END are deliberately left untouched - per the
Readme they're inert leftover fields the app ignores, so lib/config.sh
just carries whatever is already in config.json through unchanged.
Testing this menu surfaced a real gap before it ever shipped: lib/menu.sh
never had ask_time/validate_time at all (only validate_integer/ask_integer,
ask_url, etc were ported when the framework was first built) - "set a
daily lock time" would have failed for every single user with
"ask_time: command not found". Ported both from the legacy script.
Also promoted the ON/OFF toggle-label helper (previously private to
menus/display.sh as display_onoff) to a shared onoff() in lib/menu.sh,
since menus/lockout.sh needed the same thing and menu files should only
ever depend on lib/, never on each other.
Bumped SCRIPT_VERSION to 2.2.0 with matching changelog entries in the
script header and Readme, and updated "Modular Management" to list the
new menu and drop Password Protection & Lockout from the "not yet
migrated" list.
Verified:
- Full regression: re-ran the Sites, Display, Timezone/PIN scratch-config
suites after every change in this round (the onoff refactor, and again
after adding ask_time) - all still clean.
- New scratch-config test for lockout.sh: enable (password+timeout+daily
lock+boot toggle), independently recomputed the expected SHA-256 hash
and confirmed it matches config.json exactly, change password, change
timeout, clear daily lock, toggle boot password, disable (confirmed
every field clears), and that the menu builder's options correctly
differ between the enabled and disabled states.
- End-to-end: ran the real install.sh as a genuine non-root, non-"kiosk"
user - Lockout menu -> enable protection with a real password entered
via the masked prompt -> set 20m timeout, 23:00 daily lock, boot
password on -> confirmed the menu redraws with the new state -> clean
exit (code 0). Checked the resulting config.json and file permissions
on disk.
Two more menus migrated onto lib/menu.sh + lib/config.sh, chosen
specifically because neither touches config.json - a third and fourth
shape for the framework (a system command via timedatectl, and a flat
PIN file), on top of Sites' list CRUD and Display's JSON toggles.
- menus/timezone.sh: also replaces the legacy script's hand-numbered
18-entry case statement with a plain data list (TIMEZONE_COMMON_ZONES)
plus one handler that reads the number run_menu hands it - adding or
removing a zone never touches numbering anywhere else. Required a
small run_menu addition: handlers now receive the chosen 1-based
number as $1, so one handler can serve a whole data-driven list
instead of needing a wrapper function per entry.
- menus/hidden_pin.sh: set/disable/reset the PIN gating hidden pages.
Testing menus/timezone.sh surfaced a real bug before it ever shipped:
this whole tool runs under `set -e`, and set_timezone() rejecting an
invalid zone via a bare `return 1` as its last statement took down the
*entire* install.sh session, not just that one action - a single typo
would silently drop the user back to their shell. Fixed at the
framework level in lib/menu.sh (run_menu now absorbs a failed handler's
exit code) rather than patching set_timezone alone, since any future
menu could hit the same trap. Verified against the real install.sh as a
genuine non-root user: an invalid timezone now logs an error and
redraws the Timezone menu instead of killing the session (confirmed
exit code 0 at the end of the run). Note this specific hazard was
introduced by this session's own return-1 idiom, not inherited from the
legacy script, which never uses a bare return 1 in these functions.
Also per the user: left the old configure_sites/configure_touch_controls/
configure_navigation_security/configure_optional_features functions in
ubuntu-based-kiosk.sh untouched for now (still carrying the v2.0.0
settings-clobber and reorder bugs) rather than removing them - they'll
be retired in one pass once enough of Core Settings/Addons/Advanced is
migrated. Bumped SCRIPT_VERSION to 2.1.0 with matching changelog entries
in the script header and Readme, and updated the Readme's "Modular
Management" section to state plainly what is and isn't migrated yet.
Verified:
- Full regression: re-ran the Sites and Display scratch-config test
suites against the updated run_menu signature - both still clean.
- New scratch-config tests for hidden_pin.sh (set/mismatch/reject/
disable/reset, correct file permissions) and timezone.sh (builder
entry count, common-zone pick by index, manual entry with legacy
US/* alias normalization, region search + cancel, invalid-zone
rejection) - all correct, with timedatectl/sudo stubbed only where
needed to avoid mutating this sandbox's real system clock/timezone.
- End-to-end: ran the real install.sh as a genuine non-root, non-"kiosk"
user, navigating Timezone -> manual entry -> invalid zone -> confirmed
no crash and a normal return to the menu, then Hidden Site PIN -> set
a PIN -> confirmed the file on disk (mode 600, correct content) ->
clean exit (code 0).
- menus/display.sh: second menu migrated onto lib/menu.sh + lib/config.sh,
covering touch gesture mode, link navigation security, and the
pause/keyboard/navigation button toggles (previously three separate
Core Settings entries). Deliberately a different shape from Sites
(toggle list vs. list CRUD) to exercise the framework more broadly.
Wired into install.sh's top-level menu alongside Sites.
- Renamed ubuntu-based-kiosk-v1.0.3.sh -> ubuntu-based-kiosk.sh so the
installer can be updated in place instead of growing a new
version-numbered filename every release; released versions are now
tracked via git history and the in-script changelog. Updated all
Readme download/re-run commands accordingly. Older versioned files
(ubuntu-based-kiosk-v*.sh, install_kiosk_*.sh) are left in place as
archived releases.
- Bumped SCRIPT_VERSION to 2.0.0 (new script-level changelog entry) and
the Readme version/changelog to match, given the new modular
management path, the rename, and the two real bugs fixed along the
way (settings clobbered on save, off-by-one in reorder).
Verified before moving on to the web admin work:
- Regression: re-ran the full Sites scratch-config test suite (add,
edit, delete, reorder, home) - still clean, no invalid-input paths hit.
- New: scratch-config test for every display.sh action (touch mode,
navigation security, all three toggles), confirming values persist
through save/reload and that a previously-added site survives
untouched across Display-menu saves.
- End-to-end: ran the real install.sh (not just sourced functions) as a
genuine non-root, non-"kiosk" user with real sudo, driving actual menu
input through Sites -> add a page -> Display -> toggle a setting ->
exit. Confirmed final config.json on disk matches every action taken,
and both guard clauses (run as root; no installed kiosk found) fire
correctly.
Start of pulling the menu system out of the 12k-line single-file
installer so individual menus can change without risking the rest of
the script (network, VNC, addons, etc). This is groundwork for the
planned web-based management UI, which will share the same lib/config.sh
read/write layer instead of duplicating it.
- lib/menu.sh: generic numbered-menu framework (auto-numbered entries,
"0" always exits/returns) plus the validated input helpers menus need.
- lib/config.sh: single load/save for config.json. Fixes a latent bug
where the old Sites menu wrote config.json without first loading
swipe/navigation/lockout settings, silently resetting them to
defaults on save.
- menus/sites.sh: Sites & Page Timing fully migrated - add/edit/delete/
reorder pages, set duration (auto-rotate/manual/hidden) and home page.
Also fixes an off-by-one in the ported reorder logic (moving an item
landed one slot short of the requested position) caught by testing.
- install.sh: new entry point for managing an already-installed kiosk
via `git clone` + `./install.sh`, wired to the Sites menu. Does not
yet replace first-time provisioning, which still uses the existing
single-file installer.
All new site CRUD/reorder/home-page paths were exercised against a
scratch config.json (add with/without basic auth, edit duration, set
home + timeout, 2- and 3-item reorders in both directions, delete) to
confirm the resulting config.json matches expectations.
Previously nothing switched PipeWire's default sink, so audio always stayed on the laptop/built-in speakers regardless of HDMI mirroring. Adds /usr/local/bin/kiosk-audio-route.sh, which finds a sink whose name contains 'hdmi' and makes it the default (moving any already-playing streams onto it) whenever an external display is connected, falling back to the non-HDMI sink when it isn't. Called from autostart once PipeWire is confirmed ready, and from kiosk-hotplug.sh alongside the existing display mirroring on every plug/unplug event. Documents the behavior and manual fallback in the README.
Previously mirroring used 'xrandr --auto', which picks the external output's own native resolution (e.g. a TV's 1920x1080) rather than matching the kiosk/laptop panel's resolution. Extracts the shared mirroring logic (previously duplicated between autostart and the hotplug handler) into /usr/local/bin/kiosk-mirror-display.sh, which now checks whether the external output natively lists the primary's resolution and uses it directly, or generates a matching mode with cvt and forces it via --newmode/--addmode when it doesn't. Documents the behavior and a manual fallback for displays that reject non-native CVT timings in the README.
Adds a udev rule (DRM 'change' events) that triggers a new kiosk-hotplug.service, which re-runs the same xrandr mirroring logic as the Openbox autostart script. External displays plugged in after boot now get mirrored without requiring a login or lightdm restart. Named kiosk-hotplug (not kiosk-display-*) to avoid collision with the existing kiosk-display-* wildcard cleanup in remove_all_schedules(). Also removes the udev rule during Complete Uninstall and documents the behavior in the README.
Openbox autostart now detects any connected output beyond the primary and mirrors the kiosk content onto it via xrandr, instead of leaving detected-but-unused external displays dark. Also documents the behavior, its limitation (applies at session start, not live hotplug), and adds an HDMI troubleshooting section to the README.
apt install already includes curl and git; adds net-tools and ncdu to the same idempotent apt install so they're present on fresh installs without duplicating already-installed packages.
Clarifies that the installer script can be downloaded on another machine and transferred via USB, while noting the kiosk machine still needs internet access during install for apt/npm packages.
Drop the MatchProduct "Finger" restriction from the xorg libinput rule,
leaving only MatchIsTouchscreen "on". MatchIsTouchscreen is set by udev
from hardware capabilities, so it matches finger touch screens of any
brand (ELAN, Goodix, eGalax, Wacom, etc.) while never matching keyboards,
mice, or pen/stylus digitizers (which are tagged as tablets, not
touchscreens). This makes the script work on any touch hardware without
hardcoding device names. Behavior on existing Wacom machines is unchanged
since their finger device matched either way.
https://claude.ai/code/session_01EyjEQLWbTXcZgbMDarf7NU
Two genuinely separate root causes were behind the dead touchscreen:
1. GNOME keyring grab — under LightDM autologin the keyring stays locked.
When Chromium accessed it, the gcr-prompter unlock dialog grabbed all
keyboard and touch input at the X level. The app rendered (timers ran)
but ignored every tap and keypress. Fix: --password-store=basic stops
Electron from using the keyring, so the dialog never appears.
2. Wacom driver single-touch emulation — the wacom X driver only does
single-touch pointer emulation and never passes real multitouch to
Chromium, so 1-finger and 2-finger swipe gestures could not fire.
Fix: force the finger touch device to the libinput driver via
/etc/X11/xorg.conf.d/99-finger-libinput.conf. libinput delivers proper
XI2 multitouch which Chromium turns into real JS touch events. The
pen/stylus stays on the wacom driver.
Removed the earlier dead-end attempts (xsetwacom MapToOutput / CTM reset,
Wacom Enable Touch Gesture, 99-wacom-touch.conf) which were all chasing the
wrong cause while the keyring grab masked any real testing. The upgrade path
removes the stale 99-wacom-touch.conf so it can't override libinput.
https://claude.ai/code/session_01EyjEQLWbTXcZgbMDarf7NU
Update all version strings (header, SCRIPT_VERSION, JS VERSION constant)
and rename ubuntu-based-kiosk-v1.0.2.sh → ubuntu-based-kiosk-v1.0.3.sh.
Update README with v1.0.3 change log and archive v1.0.2 as previous.
https://claude.ai/code/session_01EyjEQLWbTXcZgbMDarf7NU
The duplicate-block pitfall (YAML silently ignores duplicate keys, causing
a white screen) is now called out explicitly in both the script's printed
output and the README. Added a before/after example showing the correct
merged result with the kiosk one_factor rule above the two_factor wildcard.
Also explains why one_factor is required (TOTP/WebAuthn need interactive
second step, impossible via API).
https://claude.ai/code/session_01EyjEQLWbTXcZgbMDarf7NU
- Step 3 now says MERGE (not replace/append) with clear warning to keep existing config
- access_control: kiosk one_factor rule must go ABOVE any existing two_factor rule,
with explanation that Authelia applies rules top-down (first match wins)
- session block: keep existing values; only add the block if none exists yet
- Kiosk can only do one_factor — TOTP/WebAuthn via API is not possible
- Updated in both configure_authelia() printed output and README Authentication section
https://claude.ai/code/session_01EyjEQLWbTXcZgbMDarf7NU
New file ubuntu-based-kiosk-v1.0.2.sh containing all changes made
since v1.0.1:
- Authelia auto-login addon (Addons → 5): AES-256 encrypted credentials,
startup API auth, full Dockerized server-side setup printed on save
- Fix: PipeWire .config dirs created as root caused Permission denied
at step [5.5/27] on fresh Ubuntu 24.04 minimal installs
- README install commands now pull latest script dynamically via
GitHub contents API (no more hardcoded version numbers)
SCRIPT_VERSION and VERSION constants updated to 1.0.2.
README changelog and current version updated to 1.0.2.
https://claude.ai/code/session_01EyjEQLWbTXcZgbMDarf7NU
After configure_authelia() saves credentials, it now prints the full
Dockerized Authelia server-side checklist: argon2 hash generation
command, users.yml kiosk user template, configuration.yml session
duration and access_control rules, and a docker compose restart step.
README gains a new Authentication section under Optional Add-ons
covering the same steps in Markdown with a table comparing Authelia
SSO vs HTTP Basic Auth (both can coexist).
Also clarifies that the Authelia password is encrypted at rest and
not stored in plain text.
https://claude.ai/code/session_01EyjEQLWbTXcZgbMDarf7NU
Quick Install section now queries the GitHub contents API to find and
download the latest ubuntu-based-kiosk-v*.sh script dynamically, so the
README never needs a manual version bump when a new release is pushed.
Post-install "run again" references use `ls ubuntu-based-kiosk-v*.sh | sort -V | tail -1`
for the same reason.
Also bumps version references from 1.0.0 → 1.0.1, Electron 41 → 42,
Node.js 20 → 22, and adds the v1.0.1 changelog entry.
https://claude.ai/code/session_01EyjEQLWbTXcZgbMDarf7NU
No breaking changes affecting the kiosk app between these versions:
- BrowserView still present (deprecated but not removed until future release)
- WebContentsView destroyed-event change does not apply (app uses BrowserView)
- Session.clearStorageData quotas removal not used
- PDF OOPIF change not relevant
https://claude.ai/code/session_01M3tiofbGfmTddeMcXr8nXr
- Bump version references from 0.9.9.1/0.9.8 to 1.0.0
- Update script filename to ubuntu-based-kiosk-v1.0.0.sh throughout
- Add v1.0.0 changelog entries (upgrade fix, sudo/timezone fixes)
- Preserve prior version history (v0.9.9.1, v0.9.8) as changelog
- Update Claude model reference to Sonnet 4.6
- Update last-updated date
https://claude.ai/code/session_01M3tiofbGfmTddeMcXr8nXr
- Rename install_kiosk_v0.9.9.1.sh to ubuntu-based-kiosk.sh
- Update all repository URLs from ubk to ubuntu-based-kiosk
- Remove UBK abbreviation from documentation and script headers
- Update installation instructions in Readme.md
Added to install_kiosk_v0.9.8.sh:
- SECTION 14.5: Easy Asterisk Intercom addon functions
- get_latest_easy_asterisk_version() - Fetches latest version from GitHub API
- get_installed_easy_asterisk_version() - Checks installed version
- backup_easy_asterisk_configs() - Backs up configs before updates
- restore_easy_asterisk_configs() - Restores configs after install
- download_and_install_easy_asterisk() - Downloads and runs installer
- addon_easy_asterisk_intercom() - Main menu function with update logic
- Added option 4 "Easy Asterisk Intercom" to Addons menu
- Updated show_addon_status() to display Intercom installation status
- Integration uses stable v0.9.8 as base (v0.9.9 was broken)
README updates:
- Fixed all references from v0.9.9 to v0.9.8
- Updated menu paths (2) Addons → (4) Easy Asterisk Intercom
- Corrected version number throughout
- Updated Quick Install section
Features:
- Downloads latest easy-asterisk-v*.sh from GitHub repo
- Automatic version detection and update checking
- Configuration preservation during updates/reruns
- Safe to run multiple times
- User prompts for install/update/rerun decisions
Removed:
- install_easy_asterisk() function that installed Ubuntu Asterisk packages
- configure_easy_asterisk() function for non-existent addon
- Menu option 1 "Install Easy Asterisk" (broken implementation)
- Menu option 5 "Configure Easy Asterisk" (broken implementation)
The removed code would have:
- Installed default Ubuntu Asterisk (apt-get install asterisk)
- Created fake local config files
- Conflicted with actual Easy Asterisk from GitHub repo
Updated:
- Menu renumbered: Intercom is now option 1 (was option 2)
- Configure Intercom is now option 4 (was option 6)
- Updated README to reflect new menu numbers
- Updated error messages with correct option references
Result: Clean implementation with only the working GitHub-based
Easy Asterisk Intercom installer that properly manages versions
and preserves configurations.
Features:
- Download and install latest Easy Asterisk from GitHub repository
- Automatic version detection using GitHub API
- Smart update checking with user confirmation
- Configuration preservation during updates and reruns
- Backup and restore functionality for configs
- Safe re-run capability without breaking existing setup
Menu changes:
- Added "Install/Update Intercom (Easy Asterisk)" option
- Updated configure_intercom to work with Easy Asterisk installation
- Enhanced configuration interface with file editing support
README updates:
- Added Communication section with Easy Asterisk Intercom
- Documented installation, update, and configuration workflows
- Updated version to 0.9.9
- Added installation locations and management commands
The intercom addon integrates with outis1one/easy-asterisk repository
and follows the pattern of easy-asterisk-v*.sh version files.
Bug Fixes:
- Fixed virtual console menu display (now checks both getty and X11 DontVTSwitch)
- Fixed complete_uninstall to properly remove LMS/Squeezelite services
- Fixed full_reinstall to clean all addons and settings (except saved VPN/VNC)
Named Websites Feature:
- Added 'name' field to config.json schema for all sites
- Added NAMES array throughout codebase for site name management
- Added update_site_names() function with menu option (Sites → option 3)
- Names prompted during site addition (both new installs and adding sites)
- Site listings now display as "Name" - URL when name is provided
- All management functions (add, update, delete, reorder) handle names properly
- Names fully integrated with save/load config operations
Navigation Menu Feature:
- Added enableNavButton config option (defaults to true)
- Added navigation button at top-left (purple key icon 🔑)
- Button shows on user interaction (same logic as pause/keyboard buttons)
- Navigation menu overlay with 2-column layout:
* Column 1: Clickable list of all non-hidden sites (uses names if available)
* Column 2: Touch gesture cheat sheet and keyboard shortcuts reference
- Menu accessible via key icon click
- IPC handlers added: get-config and navigate-to-tab
- Menu excludes hidden sites (duration === -1) as requested
- Optional feature configurable via Optional Buttons menu
README Updates:
- Updated all version references to 0.9.8
- Updated installation commands to use install_kiosk_0.9.8.sh
- Added comprehensive "Why Use Named Sites?" section with use cases:
* Home/Family kiosks examples
* Business kiosks examples
* Digital signage examples
* Multi-location setups examples
- Updated Multi-Site Management section to include named sites and navigation menu
- Updated Touch Controls section to reflect correct gesture (3-finger DOWN toggle)
- Updated Project Status to version 0.9.8
- Updated menu access commands throughout document
Technical Implementation:
- preload.js: Added nav button/menu variables, create/show/hide functions
- preload.js: Added IPC listener for 'nav-button-enabled'
- preload.js: Integration with user interaction handlers
- main.js: Added enableNavButton variable and config loading
- main.js: Added 'get-config' and 'navigate-to-tab' IPC handlers
- main.js: Send nav-button-enabled state on page load
- Bash script: Added site name prompts in add_new_sites() and add_new_sites_simple()
- Bash script: Added update_site_names() function for updating existing site names
- Bash script: Updated configure_optional_buttons() to include navigation button
- Bash script: Updated all save/load config operations to handle NAMES array
Script now at 9607 lines (242 lines added for navigation menu feature)
All syntax validated with bash -n
- Removed PTT (Push-to-Talk) functionality (moved to separate project)
- Fixed power menu to display both local and VPN IP addresses
- Updated Electron to v39.2.4 with enhanced rollback instructions
- Updated README dates to 2025 and version references to 0.9.7-5
- Removed stray text from README printer section
Major Changes:
1. FIXED: Virtual console Ctrl+Alt+F1-F8 key combinations now work properly
- Updated configure_virtual_consoles() to modify X11 serverflags
- Enable/disable now updates both systemd getty AND X11 VT switching
- Added restart lightdm notification for changes to take effect
- Fixed initial installation to set X11 VT switching based on user choice
- Users who previously enabled consoles must re-enable for keys to work
2. IMPROVED: Simplified hidden tab gesture to single toggle
- 3-finger DOWN now toggles hidden tabs (both show AND hide)
- Removed separate 3-finger UP gesture (simpler UX)
- Updated all gesture handlers in both standard and Jitsi modes
- Updated all console.log messages and documentation
README Updates:
- Updated all version references to 0.9.7-4
- Updated Touch Gesture Quick Reference table
- Simplified gesture: 3-finger DOWN = Toggle hidden tabs
- Updated hidden tabs documentation to reflect toggle behavior
- Added important notes about virtual console fix in 0.9.7-4
- Added instructions to re-enable consoles for existing users
- Updated menu system access examples
- Updated project status to "Gesture & Console Improvements"
This release focuses on fixing the console key combo issue and improving
the hidden tab gesture for easier one-handed use.
Version Changes:
- Created install_kiosk_0.9.7-3.sh with updated version number
- Updated script header with release notes for 0.9.7-3
- Updated SCRIPT_VERSION constant to "0.9.7-3"
README Updates:
- Updated all references from 0.9.7-2 to 0.9.7-3
- Updated Quick Install wget command
- Updated Menu System Access examples
- Updated Complete Uninstall examples
- Updated Project Status section
- Updated footer version
Release Notes for 0.9.7-3:
- Fixed missing complete_uninstall function (line 8704 error)
- Added virtual console configuration (Ctrl+Alt+F1-F8)
- Added emergency hotspot to initial installation
- Enhanced security options and documentation
Documentation updates:
- Update Quick Install script name to install_kiosk_0.9.7-2.sh
- Document virtual console configuration feature
- Document emergency hotspot configuration during install
- Document complete uninstall functionality
- Add comprehensive "Why Use Hidden Tabs?" section with:
- Private communication use cases
- Administrative access scenarios
- Content management applications
- Secure entertainment options
- Business use cases
- Real-world example scenarios
- Add new "Installation & Management Features" section with:
- Virtual Console Configuration details
- Emergency WiFi Hotspot documentation
- Complete Uninstall process and safety features
- Update menu system documentation
- Update system behavior security notes
- Update version and date to 0.9.7-2, December 2, 2024
Claude