- chmod +x all *.sh and *.py in install.sh so permissions survive git checkouts
- Fix daily_sunrise_video.sh and Python scripts missing executable bit
- Add [CAM_NAME] prefix to all 4-seasons.sh notify.sh calls so multi-camera
setups show which camera each daily clip came from
- Include camera name in output filename: YYYY-MM-DD_<cam>_MvtN-DayXofY-final.mp4
https://claude.ai/code/session_01C4jbd3waXG3eKZYbGUjLUQ
Per-camera capture interval:
CAPTURE_INTERVAL_<cam> in sky-cam.conf overrides the global value for
a specific camera. capture.sh and 4-seasons.sh both respect it.
Example: south at 30s saves storage; north at 5s gives smoother motion.
4-seasons.sh one-frame bug fix:
Same root cause as the sunrise scripts — concat list had no 'duration'
entries, collapsing all JPEG frames to timestamp 0. Fixed by writing
'duration INTERVAL' per frame. Added fps=25 to the speed-adjust step
so the VFR source resamples to a standard frame rate.
ambient-record.sh (new):
Continuous AAC recorder for natural sounds (birds, rain, wind).
Saves AMBIENT_CHUNK_SECS chunks to AMBIENT_DIR/<cam>/YYYY-MM-DD/HH-MM-SS.m4a.
Reconnects automatically on stream failure. Rolling retention via
AMBIENT_RETENTION_DAYS. Enabled by setting AMBIENT_ENABLED=true and
listing cameras in AMBIENT_CAMS in sky-cam.conf, then re-running install.sh.
https://claude.ai/code/session_01C4jbd3waXG3eKZYbGUjLUQ
Notification config (NTFY_URL, MM_NOTIFY_CHANNEL_ID, etc.) lives in
.env but notify.sh was only sourcing sky-cam.conf, so notifications
were silently skipped even when configured.
https://claude.ai/code/session_01C4jbd3waXG3eKZYbGUjLUQ
enable --now only starts a service that is not yet running — it leaves
an already-running service untouched, so changes to .env credentials
are never picked up without a manual restart.
Switching to enable + restart means every install.sh run brings capture
services in sync with the current sky-cam.conf and .env: new cameras
start, reconfigured cameras restart, and nothing needs manual follow-up.
https://claude.ai/code/session_01C4jbd3waXG3eKZYbGUjLUQ
CAM_RTSP_<cam> is set in .env, not sky-cam.conf, but capture.sh was
only sourcing sky-cam.conf — causing the service to fail with "not set"
even after credentials were added to .env.
https://claude.ai/code/session_01C4jbd3waXG3eKZYbGUjLUQ
Root cause: the concat list had no 'duration' entries, so all JPEG
frames collapsed to timestamp 0 and only one frame survived encoding.
Fix: add 'duration CAPTURE_INTERVAL' per entry in both scripts.
Also add fps=25 to the speed-adjust step so the VFR source is resampled
to a standard frame rate — without this, players see ~6fps and may drop
frames to reach the declared rate.
daily_sunrise_video.sh --test [MINUTES]:
Skips sunrise.py lookup and capture-window wait. Uses the last MINUTES
minutes of captured frames (default 2). Overlay shows the mid-point
frame's timestamp. Audio grabbed live from RTSP immediately.
Output: <date>-daily-sunrise-test.mp4 — no notifications or upload.
Usage: ./daily_sunrise_video.sh east --test 2
https://claude.ai/code/session_01C4jbd3waXG3eKZYbGUjLUQ
- fontcolor: white → yellow (both scripts)
- y position: (h-th)/2 → h-th-18 (vertically centered → lower-right corner)
- test-sunrise.sh: reverted to reading last 60 frames from capture directory
(~10 minutes at 10s interval) instead of live RTSP capture
https://claude.ai/code/session_01C4jbd3waXG3eKZYbGUjLUQ
Overlay fix (both scripts):
Switch from text='...\n...' to drawtext's textfile= option. Writing
each character on its own line eliminates the \n escape ambiguity in
ffmpeg's filter-string single-quote parser, which was causing 'n' to
appear literally instead of as a line break.
test-sunrise.sh redesign:
Now captures NUM_FRAMES fresh RTSP frames (120s at default interval)
at run time instead of reading pre-existing frames from the capture
directory. The RTSP URL must be set in .env — the script fails early
with a clear message if it is not.
https://claude.ai/code/session_01C4jbd3waXG3eKZYbGUjLUQ
- Overlay text was showing characters run together (e.g. '1n2n') because
inside ffmpeg single-quoted filter text, \n is consumed as just 'n'.
Fix: use \\\\n in bash double-quotes which stores \\n in the variable,
which ffmpeg then parses as \n, which drawtext renders as a newline.
Applied to both test-sunrise.sh (MID_VERT) and daily_sunrise_video.sh
(SR_VERT, replacing the awk one-liner with the same bash approach).
- test-sunrise.sh concat list was missing per-frame duration entries,
causing 12 frames to encode as 0.48s (25fps default) and then slow
down instead of compress. Fixed by writing 'duration INTERVAL' per
frame so 12 frames × 10s = 120s raw → 12× compression to 10s.
- Removed 2>/dev/null from audio ffmpeg call in test-sunrise.sh so
capture failures are visible for diagnosis.
https://claude.ai/code/session_01C4jbd3waXG3eKZYbGUjLUQ
Runs the same 4-step pipeline as daily_sunrise_video.sh but uses the
most recent ~2 minutes of captured frames instead of the sunrise window,
grabs live RTSP audio for the audio mix step, and accepts an arbitrary
output path — so it can be run at any time of day to verify the full
pipeline (speed-adjust, audio mix, vertical time overlay) without
waiting for tomorrow's sunrise.
https://claude.ai/code/session_01C4jbd3waXG3eKZYbGUjLUQ
capture.sh creates the per-day subdirectory at runtime, but BASE_DIR/<cam>
and MOVIES_DIR/<cam> need to exist first. Create them during install so the
capture service works immediately on first start without needing a separate
manual mkdir step.
https://claude.ai/code/session_01C4jbd3waXG3eKZYbGUjLUQ
The shell version had to pass the password through a shell variable into
a Python subprocess, which is fragile for special characters.
The Python version uses getpass.getpass() which reads directly from the
terminal at the Python level — no shell variable, no quoting issues, no
risk of special characters being mishandled.
https://claude.ai/code/session_01C4jbd3waXG3eKZYbGUjLUQ
Prompts for a password without echoing, URL-encodes it via Python's
urllib.parse.quote, and prints the result with a ready-to-paste .env
snippet. Password is passed via environment variable to avoid any
shell quoting or injection issues — never written to disk or network.
https://claude.ai/code/session_01C4jbd3waXG3eKZYbGUjLUQ
- Set XDG_RUNTIME_DIR before systemctl --user calls so daemon-reload
and enable --now work when run outside a login session (e.g. via SSH
or sudo)
- Run loginctl enable-linger so user services start at boot without a
login session
- Update .env.example to use single quotes around RTSP URLs and
document URL-encoding for special characters in passwords
https://claude.ai/code/session_01C4jbd3waXG3eKZYbGUjLUQ
Older sky-cam.conf versions may not define these. Fall back to the
canonical defaults so make-finals.sh works without requiring the user
to update their local conf.
https://claude.ai/code/session_01C4jbd3waXG3eKZYbGUjLUQ
Allows processing a single movement without waiting for the full backup
scan, e.g.:
./make-finals.sh ~/drives/data2-main --cam north --season Autumn --mvt 1
Filters are applied as soon as the relevant variable is known (cam before
calling season_info.py, season/mvt after) so skipped files cost almost
nothing.
https://claude.ai/code/session_01C4jbd3waXG3eKZYbGUjLUQ
The previous check used || true which masked ffprobe's non-zero exit
code. For files with a missing/partial moov atom ffprobe can print a
duration estimate then exit non-zero — the || true let that through.
Now use || raw_dur="" to honour the exit code, and add a second probe
for an actual video stream codec so files that report a duration but
have no decodable stream are also caught.
https://claude.ai/code/session_01C4jbd3waXG3eKZYbGUjLUQ
Short adagio movements (Summer Mvt 2 at 107s, Winter Mvt 2 at 132s, etc.)
compress each day to only 3-5 seconds of screen time at 1×. Looping the
music N times multiplies the per-day target duration proportionally so the
footage is less aggressively sped up and more watchable.
- sky-cam.conf: add MONTAGE_MUSIC_LOOPS and per-movement overrides
(Summer Mvt2=3×, Winter Mvt2=3×, Autumn Mvt2=2×, Summer Mvt3=2×, Spring Mvt2=2×)
- 4-seasons.sh: multiply target_per_clip by loops
- montage-mvt.sh: compute effective_duration, use -stream_loop for audio,
fix fade_out_start, -t, and post-build duration check
- make-finals.sh: multiply target by loops
https://claude.ai/code/session_01C4jbd3waXG3eKZYbGUjLUQ
Check ffprobe output before encoding — empty/N/A duration means the
file is corrupt or truncated; skip with a clear message rather than
passing a bad input to ffmpeg.
https://claude.ai/code/session_01C4jbd3waXG3eKZYbGUjLUQ
Scans all *-temp.mp4 files under a backup root regardless of directory
structure, infers camera name from path, uses season_info.py for correct
movement sizing, writes finals to MOVIES_DIR. Handles messy nested paths
(south/south/, movies/south/, etc.) and deduplicates via EXISTS check.
https://claude.ai/code/session_01C4jbd3waXG3eKZYbGUjLUQ
Restructure find loop to iterate known CAMERAS+sunrise in the main shell
so cam_name is visible in the while body. Previously the for loop ran in
a process substitution subshell, making cam_name unavailable and causing
top-level year dirs (e.g. 2026/) to be treated as camera names.
https://claude.ai/code/session_01C4jbd3waXG3eKZYbGUjLUQ
Moves Season/MvtN mp4 files from flat camera dirs into
astro-YEAR/<cam>/Season/MvtN/ using season_info.py for correct
year assignment. Handles cross-year mixing in old backup structure.
Dry-run support; never deletes files.
https://claude.ai/code/session_01C4jbd3waXG3eKZYbGUjLUQ
Re-processes *-temp.mp4 files from a backup location using season_info.py
to compute the correct target duration per clip (music_duration / DAYS_IN_MVT),
producing properly-sized *-final.mp4 files without touching the backup source.
Skips finals that already exist. Fixes drift caused by old pipeline sizing clips
to the wrong movement structure.
https://claude.ai/code/session_01C4jbd3waXG3eKZYbGUjLUQ
- sky-cam.conf: add ENCODE_PRESET=slow (applied to all encodes);
split CRF_MONTAGE (intermediates, H.264) from CRF_MONTAGE_FINAL=22
(archive montage, H.265); add SUNRISE_RETENTION_DAYS=10; improve
CAPTURE_INTERVAL comment with storage/density table
- montage-mvt.sh: steps 1+2 use preset; step 3 final switches to
libx265 + CRF_MONTAGE_FINAL + -tag:v hvc1 for broad compatibility
- 4-seasons.sh: both encode steps use ENCODE_PRESET
- daily_sunrise_video.sh: all encode steps use ENCODE_PRESET; rolling
retention deletes sunrise videos older than SUNRISE_RETENTION_DAYS
https://claude.ai/code/session_01C4jbd3waXG3eKZYbGUjLUQ
- verify-mvt.sh: remove dead first _info= line (used MVT_START before
defined); fix JPEG size loop to accumulate bytes correctly and display
human-readable total; show size in delete confirmation
- montage-mvt.sh: grep -c uses || echo 0 instead of || true to be
unambiguous about the no-match value under set -e
- capture.sh, capture-watchdog.sh: require camera name arg, remove
silent SUNRISE_CAM fallback
- migrate-seasons.sh: require --cam arg, error if missing
- README.md, sky-cam.conf: remove stale fullday-video.sh references;
README pipeline diagram updated to show verify-mvt.sh
https://claude.ai/code/session_01C4jbd3waXG3eKZYbGUjLUQ
No script defaults to SUNRISE_CAM (east) for the seasons pipeline.
Every direction is treated equally — camera name is a required arg,
not an optional override.
- 4-seasons.sh: $1 required, exits with usage if missing
- montage-mvt.sh: arg order changed to <cam> [date]; $1 required
- year-end-join.sh: $2 (cam) required
- verify-mvt.sh: $4 (cam) required
- migrate-seasons.sh: example commands updated to new arg order
- README.md: montage-mvt.sh examples updated
https://claude.ai/code/session_01C4jbd3waXG3eKZYbGUjLUQ
- sky-cam.conf: CAMERAS now includes east, north, south with staggered
SCHEDULE_SEASONS times (01:00, 01:30, 02:00); fullday schedules and
tuning removed
- install.sh: fullday service/timer generation removed entirely
- fullday-video.sh + systemd units: deleted
- montage-mvt.sh: post-build technical checks (duration drift, video/audio
stream presence) added; notification now includes check results and the
exact verify-mvt.sh command to run
- verify-mvt.sh: new interactive CLI for montage review — shows checks,
plays video, deletes source JPEG folders on approval, or re-runs montage
https://claude.ai/code/session_01C4jbd3waXG3eKZYbGUjLUQ
--cam NAME overrides SUNRISE_CAM so the script can be used for any
camera (e.g. north). Summer is now included in the find targets so
any ASTRO_YEAR=2025 Summer clips (Summer 2026) are also migrated.
https://claude.ai/code/session_01C4jbd3waXG3eKZYbGUjLUQ
The old pattern *Mvt*3* matched .mp3 in every MP3 filename, so sort|head-1
always picked track 01 (Mvt1). Fix by finding all files for the season
then filtering with grep -iE "Mvt[^0-9]*N[^0-9]", which requires the
movement number to be surrounded by non-digit characters (space, dot,
underscore) and cannot match digits embedded in .mp3 or track prefixes.
https://claude.ai/code/session_01C4jbd3waXG3eKZYbGUjLUQ
All *-final.mp4 clips are valid footage regardless of what speed factor
the old script used — montage-mvt.sh re-adjusts the full concatenated
video to match music duration anyway, so per-clip speed is irrelevant.
Move every ASTRO_YEAR=2025 clip to the correct new movement directory
based on its date. Spring Mvt1 now gets all 30 clips (Mar 21–Apr 19).
https://claude.ai/code/session_01C4jbd3waXG3eKZYbGUjLUQ
- Filter to ASTRO_YEAR=2025 (Winter 2025-26 onward); skip Autumn 2025 and earlier
- Move files instead of creating symlinks
- Quarantine clips matching Day<N>of92 (Spring clips from broken script with
wrong 92-day movement total) to quarantine-old-scripts/ for review + deletion
- Preserve clips with Dayof92 (no day number, old legacy format) — these are
migrated normally since montage-mvt.sh re-adjusts speed regardless
- Summary shows delete commands for temp files and quarantine folder
https://claude.ai/code/session_01C4jbd3waXG3eKZYbGUjLUQ
migrate-seasons.sh uses season_info.py to re-classify every old
*-final.mp4 clip by its YYYY-MM-DD filename prefix, placing a symlink
in the correct new-system directory regardless of how the old system
labelled movements. Handles the boundary mismatches between old and
new movement splits automatically.
Coverage after migration (based on available clips):
Spring 2026 Mvt1 30/31 days (missing Day 1 only — excellent)
Winter Mvt1 ~18/29 days
Winter Mvt2 ~24/29 days
Winter Mvt3 ~20/31 days
Autumn Mvt1 ~24/30 days
Autumn Mvt3 ~18/30 days
Autumn Mvt2 absent — year-end join will not fire for 2024 cycle
https://claude.ai/code/session_01C4jbd3waXG3eKZYbGUjLUQ
capture-watchdog.sh: long-running script that checks the newest JPEG mtime
in each camera's output directory every CAPTURE_STALE_SECS/3 seconds (min 5s).
Sends a stall notification via notify.sh if no new frame has arrived within
CAPTURE_STALE_SECS. Sends a recovery notification once new frames resume.
Only alerts if the camera was previously working (avoids false positives on
first start or overnight before the first frame of the day).
sky-cam.conf: CAPTURE_STALE_SECS=30 added next to CAPTURE_INTERVAL with a
note that it should be at least 2x the interval.
install.sh: generates sky-cam-watchdog-<cam>.service for every camera that
has a RTSP URL configured. The watchdog service starts after and alongside
the capture service, restarts on failure, and is enabled/started with the
same loop as the capture service.
README.md: note about watchdog and journalctl command for its logs.
https://claude.ai/code/session_01C4jbd3waXG3eKZYbGUjLUQ
montage-mvt.sh, year-end-join.sh: CAM_NAME fallback referenced undefined
\$CAM_NAME — crashes under set -euo pipefail on manual runs without args.
Fixed to fall back to \$SUNRISE_CAM (same fix applied earlier to other scripts).
notify.sh: Mattermost notification guard only checked MM_NOTIFY_CHANNEL_ID,
not mattermost_url or access_token. If those are unset, curl would send a
malformed request silently. Added guards for all three required values.
install.sh: seasons/fullday service units had literal \n in After=/Wants=
lines because bash does not interpret \n in heredoc variable expansions.
Changed to \$'...' syntax so actual newlines are written, making valid
systemd unit files. Also: audio capture timer now uses \$SCHEDULE_SUNRISE
instead of hardcoded 03:00, keeping it in sync if the user changes the
schedule.
sunrise-audio-capture.sh: record_start_sec could theoretically go negative
(sunrise very early + large SUNRISE_TARGET_SECS). Added floor-at-zero guard.
daily_sunrise_video.sh: added comment explaining why audio_offset is always 0.
README.md: fix CAM_RTSP_sunrise example to CAM_RTSP_east.
https://claude.ai/code/session_01C4jbd3waXG3eKZYbGUjLUQ
Cameras are now named by direction (east, north, south, west) throughout
config defaults, examples, and documentation. The config key SUNRISE_CAM
is unchanged — it still means 'which camera faces east and gets the sunrise
job'. Only the camera instance name value changes from 'sunrise' to 'east'.
sky-cam.conf: CAMERAS=(east), SUNRISE_CAM=east, SCHEDULE_*_east,
example comments updated to show all four compass points.
README.md: all command examples updated (4-seasons.sh east, journalctl
sky-cam-capture-east, etc.) — phenomenon references ('sunrise window',
'sunrise time') left unchanged.
bootstrap.sh: example updated to show compass directions.
https://claude.ai/code/session_01C4jbd3waXG3eKZYbGUjLUQ
- Step 1 is now dependency installation (apt + pip3) before anything else
- SCRIPT_DIR removed from config table (auto-detected)
- RTSP/Mattermost credentials moved to .env section (step 4)
- install.sh now shown as generating .env.example before credentials are filled in
- Schedule settings explained: SEASONS/FULLDAY process yesterday; SUNRISE waits internally
- How it works: audio capture described as SUNRISE_TARGET_SECS centred on sunrise
- daily_sunrise_video.sh pipeline updated: steps 3a/3b shown separately
- Resilience section replaced with four-tier audio/overlay matrix table
- Camera audio section updated: exact duration, centred split, odd-second rule
- Manual operations: examples use explicit camera name argument
https://claude.ai/code/session_01C4jbd3waXG3eKZYbGUjLUQ
4-seasons.sh, fullday-video.sh: CAM_NAME fallback referenced undefined
\$CAM_NAME — under set -euo pipefail this crashes if called manually without
an argument. Changed to fall back to \$SUNRISE_CAM (matches capture.sh).
daily_sunrise_video.sh: add log message when the capture window has already
closed (manual re-run after the fact). Behaviour is unchanged — processing
proceeds immediately — but the operator now gets a clear confirmation rather
than silence.
https://claude.ai/code/session_01C4jbd3waXG3eKZYbGUjLUQ
Previously sunrise-audio-capture.sh recorded the entire capture window
(70+ minutes) and daily_sunrise_video.sh sought to the right position with
a complex offset calculation.
Now: record floor(TARGET/2) seconds before sunrise and ceil(TARGET/2) after —
odd second goes to post-sunrise. The file is exactly SUNRISE_TARGET_SECS long
and already centred, so no offset is needed when mixing.
AUDIO_PRE_BUFFER_MIN removed — it was part of the old whole-window scheme
and is no longer meaningful.
https://claude.ai/code/session_01C4jbd3waXG3eKZYbGUjLUQ
sky-cam.conf:
- SCRIPT_DIR auto-detects from its own location via BASH_SOURCE — no manual
path entry needed after bootstrap; override still works via environment.
- BASE_DIR defaults to \$SCRIPT_DIR/data; MOVIES_DIR defaults to \$BASE_DIR/movies.
Override either to point at a drive/mount as before.
- SCHEDULE_SUNRISE changed to 03:00 — the script now waits internally until
the capture window closes before touching images, so the schedule just needs
to be early enough, not timed exactly to sunrise.
- Schedule section rewritten to explain what each job does and what day's data
it processes (SEASONS/FULLDAY always process yesterday).
- SUNRISE_PRE_MIN/POST_MIN comments explain the window and its relationship to
SUNRISE_TARGET_SECS.
- SUNRISE_OVERLAY_ENABLED=true added; set false to skip the timestamp entirely.
daily_sunrise_video.sh:
- After calculating the capture window, sleep until end_sec+30s if we fired
before the window finished — guarantees all images are present.
- DT (drawtext filter) is only built when SUNRISE_OVERLAY_ENABLED=true.
- Step 3b skips ffmpeg entirely when overlay is disabled, moving work_video
directly to final_video (faster, no re-encode).
https://claude.ai/code/session_01C4jbd3waXG3eKZYbGUjLUQ
daily_sunrise_video.sh: use \$MOVIES_DIR instead of \$BASE_DIR/movies so the
override in sky-cam.conf is respected when videos live on a separate drive.
capture.sh: default camera name falls back to \$SUNRISE_CAM (not the
undefined \$CAM_NAME) when no argument is passed.
sunrise2mm.py: also loads .env after sky-cam.conf so Mattermost credentials
moved to .env are actually visible to the upload script.
sunrise.py: raise a clear error message when LATITUDE/LONGITUDE/TIMEZONE
are missing from sky-cam.conf instead of an opaque KeyError.
4-seasons.sh, montage-mvt.sh: capture season_info.py output before eval so
a Python failure exits cleanly with a diagnostic message rather than
silently continuing with undefined variables.
bootstrap.sh: add system package install step (ffmpeg bc fonts-dejavu) and
show the .env setup step after install.sh generates .env.example.
README.md: correct Python package names and add fonts-dejavu dependency.
https://claude.ai/code/session_01C4jbd3waXG3eKZYbGUjLUQ
sky-cam.conf now sources .env from the same directory at the bottom of the
file, so RTSP URLs, Mattermost tokens, and notification credentials can live
outside version control. Plaintext credential placeholders removed from conf.
install.sh generates .env.example on every run with the correct CAM_RTSP_*
variable names derived from the CAMERAS list, so users always know exactly
what to put in .env for their specific camera setup.
.gitignore: add .env and sunrise-sounds/ (downloaded audio library).
https://claude.ai/code/session_01C4jbd3waXG3eKZYbGUjLUQ
daily_sunrise_video.sh: derive CAM_NAME from $1 (defaulting to SUNRISE_CAM)
instead of an undefined variable; this was causing empty image/output paths.
install.sh: pass $SUNRISE_CAM as argument to daily_sunrise_video.sh so it
matches the pattern used by every other per-camera script.
sunrise2mm.py: use SUNRISE_CAM config key (not the undefined CAM_NAME) to
locate the output directory; fixes silent path mismatch on non-default names.
4-seasons.sh: remove stray `set -x` that was flooding systemd logs with
shell trace output.
README.md: correct Python dependencies from `ephem` to `suntime pytz` to
match what sunrise.py actually imports.
https://claude.ai/code/session_01C4jbd3waXG3eKZYbGUjLUQ
Each stage can now fail independently, giving four upload paths:
audio+overlay, audio-only, overlay-only, or speed-only video.
Step 3a copies the video stream (no re-encode) when mixing audio,
so step 3b failure still leaves a clean audio-mixed file to promote.
Overlay failure notification now reports which quality was uploaded.
https://claude.ai/code/session_01C4jbd3waXG3eKZYbGUjLUQ
daily_sunrise_video.sh: priority chain is camera mic → library random MP3 →
overlay-only → sped video promotion. If audio mixing fails a warning
notification fires and the script retries with overlay-only so a video is
always produced and uploaded.
download-sunrise-sounds.py: downloads CC-licensed ambient sounds from
freesound.org into 11 weather/season category folders (~275 files total at
25 per category), writing a manifest.json with attribution data.
https://claude.ai/code/session_01C4jbd3waXG3eKZYbGUjLUQ
Claude