54 lines
1.8 KiB
Bash
Executable File
54 lines
1.8 KiB
Bash
Executable File
#!/usr/bin/env bash
|
|
# Convert PERC H730 drives to Non-RAID (per-disk passthrough) mode.
|
|
# Run once on the Proxmox host before assigning drives to VMs.
|
|
# Requires: perccli (install from Dell's website or local .deb)
|
|
#
|
|
# Dell PERC H730 does not have a true HBA/IT mode. Non-RAID mode is the
|
|
# equivalent — each disk is presented directly to the OS with SMART intact.
|
|
|
|
set -euo pipefail
|
|
|
|
PERCCLI=$(command -v perccli || command -v perccli64 || true)
|
|
if [[ -z "$PERCCLI" ]]; then
|
|
echo "perccli not found. Install from:"
|
|
echo " https://www.dell.com/support (search 'PERCCLI')"
|
|
echo " or: dpkg -i perccli_*.deb"
|
|
exit 1
|
|
fi
|
|
|
|
echo "=== Controller overview ==="
|
|
$PERCCLI show
|
|
|
|
echo ""
|
|
echo "=== Drives on controller 0 ==="
|
|
$PERCCLI /c0 /eall /sall show
|
|
|
|
echo ""
|
|
read -rp "Proceed with converting all non-OS drives to Non-RAID mode? [y/N] " confirm
|
|
[[ "$confirm" =~ ^[Yy]$ ]] || { echo "Aborted."; exit 0; }
|
|
|
|
# Identify enclosure IDs (typically 8 for the internal backplane on R730xd)
|
|
ENCLOSURES=$($PERCCLI /c0 /eall show | awk '/^[0-9]/{print $1}' | sort -u)
|
|
|
|
for enc in $ENCLOSURES; do
|
|
echo ""
|
|
echo "=== Processing enclosure $enc ==="
|
|
SLOTS=$($PERCCLI /c0 /e"$enc" /sall show | awk '/UGood|Onln|JBOD|DHS/{print $2}' | sort -u)
|
|
|
|
for slot in $SLOTS; do
|
|
echo -n " Slot $slot: setting to Good... "
|
|
$PERCCLI /c0 /e"$enc" /s"$slot" set good force 2>&1 | grep -i "success\|error\|already" || true
|
|
|
|
echo -n " Slot $slot: setting to Non-RAID... "
|
|
$PERCCLI /c0 /e"$enc" /s"$slot" set nonraid 2>&1 | grep -i "success\|error\|already" || true
|
|
done
|
|
done
|
|
|
|
echo ""
|
|
echo "=== Final drive state ==="
|
|
$PERCCLI /c0 /eall /sall show
|
|
|
|
echo ""
|
|
echo "Done. Reboot the host for changes to take full effect."
|
|
echo "After reboot, run build-bay-map.sh to map bays to /dev/disk/by-id paths."
|