root/local_proxmox
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

Merge pull request #17 from outis1one/claude/bios-vt-power-settings-mxjh0x

Browse Source 
Claude/bios vt power settings mxjh0x
This commit is contained in:
Outis
2026-06-27 01:38:39 -04:00
committed by GitHub
parent 0a3a3b3232 2461cfd672
commit 00047ec727
1 changed files with 88 additions and 170 deletions
Download Patch File Download Diff File Expand all files Collapse all files
README.md
+88 -170
View File
@@ -1948,7 +1948,16 @@ IMPORTANT: Pass the GPU + its HDMI audio sibling to the same VM.
**Write down or copy this address** — you need it in Phase 11 when
creating the VMs. In this example:
- GPU is at `04:00` → goes in VM 100 (Frigate)
- GPU is at `04:00` → goes in VM 101 (Desktop/Media)
> **Why not Frigate?** The Coral TPU handles all object detection. Frigate
> only uses the GPU for hardware video decode (NVDEC) — useful but not
> critical. With dual Xeons the R730xd has plenty of CPU headroom for software
> decode. Giving the GPU to the desktop VM unlocks Jellyfin transcoding,
> HandBrake encoding, and general GPU acceleration where it's more valuable.
> If Frigate's CPU decode becomes a bottleneck later, add a cheap ewaste GPU
> (GT 1030, GTX 1050 Ti, or Quadro P400/P600 — all under $50 used) and pass
> that to VM 100 instead.
---
@@ -2183,31 +2192,9 @@ Click **Next**.
Click **Next**, then **Finish**.
VM 100 now appears in the left panel. **Do not start it yet** — the GPU, Coral
USB, and data drives must be added first.
---
### Step 11.4 — Add GPU passthrough to VM 100
In the left panel, click **100 (frigate)** → **Hardware** tab.
Click **Add** → **PCI Device**.
| Field | Value |
|-------|-------|
| Raw Device | select the GPU from the dropdown (shows PCI address + model name) |
| All Functions | **checked** |
| Primary GPU | **checked** |
| PCI-Express | **checked** |
> **All Functions** passes both `04:00.0` (VGA) and `04:00.1` (HDMI audio) as
> a unit. Without it the audio sibling stays on the host.
> **Primary GPU** (`x-vga=1` in the config) tells the VM this is its display
> adapter. Required for console output in the guest before GPU drivers load.
Click **Add**.
VM 100 now appears in the left panel. **Do not start it yet** — the Coral
USB and data drives must be added first. VM 100 (Frigate) runs without a GPU —
the Coral handles detection and the CPU handles video decode.
---
@@ -2301,6 +2288,23 @@ qm set <vmid> -usb0 host=2-1 # bus-port notation from lsusb -t
- To see what's currently passed through: `grep usb /etc/pve/qemu-server/<vmid>.conf`
- To remove a device: `qm set <vmid> -delete usb0`
**USB optical drives:**
Pass a USB optical drive to VM 101 (Desktop) for ripping with MakeMKV or
HandBrake. Use **Method B (by port)** rather than by vendor/device ID — some
optical drives briefly re-enumerate when a disc spins up, which can cause the
device to drop and reconnect if bound by ID.
```bash
# Find the port your drive is on:
lsusb -t
# Then pass it to VM 101:
qm set 101 -usb1 host=<bus>-<port> # e.g. host=2-3
```
Inside VM 101 the drive appears as `/dev/sr0`. MakeMKV and HandBrake will
find it automatically.
---
### Step 11.6 — Add raw data drives to VM 100 via CLI
@@ -2347,7 +2351,7 @@ scsi8: /dev/disk/by-id/scsi-35000cca23bab1234,size=0
---
### Step 11.7 — Create VM 101 (Ubuntu Desktop, no GPU)
### Step 11.7 — Create VM 101 (Ubuntu Desktop + GPU)
Click **Create VM** in the web UI.
@@ -2359,10 +2363,22 @@ Click **Create VM** in the web UI.
| Memory | 16384 MiB |
| Disk | 64 GiB on local-lvm |
No GPU, no Coral USB — the single GPU is already assigned to VM 100.
After the wizard completes, add the GPU in the **Hardware** tab:
> VM 101 uses Ubuntu Desktop for a full GUI environment accessible via
> Proxmox's noVNC console or RDP.
Click **Add** → **PCI Device**.
| Field | Value |
|-------|-------|
| Raw Device | select the GPU from the dropdown |
| All Functions | **checked** |
| Primary GPU | **checked** |
| PCI-Express | **checked** |
Click **Add**.
> VM 101 gets the GPU for Jellyfin transcoding, HandBrake encoding, and
> general desktop GPU acceleration. Accessible via Proxmox noVNC console
> or RDP once Ubuntu Desktop is installed.
Add the two data drives via CLI:
@@ -2483,8 +2499,8 @@ Leave the large data drives untouched — they are for you to configure later.
| What is done | Status |
|---|---|
| Ubuntu Server 24.04.4 and Desktop 24.04.4 ISOs uploaded to Proxmox | ✓ |
| VM 100 created: GPU, Coral USB (×2), 8 raw data drives | ✓ |
| VM 101 created: no GPU, 2 raw data drives | ✓ |
| VM 100 created: Coral USB (×2), 8 raw data drives, CPU decode | ✓ |
| VM 101 created: GPU, 2 raw data drives | ✓ |
| VM 102 created: 2 raw data drives, no GPU | ✓ |
| Ubuntu installed and SSH accessible in all three VMs | ✓ |
@@ -2492,13 +2508,17 @@ Leave the large data drives untouched — they are for you to configure later.
## Phase 12 — Deploy Frigate in VM 100
**What this phase does:** Installs the NVIDIA driver and Docker inside VM 100,
creates a ZFS storage pool from the 8 data drives, then deploys Frigate NVR
with GPU-accelerated video decode and Coral object detection.
**What this phase does:** Installs Docker inside VM 100, creates a ZFS
storage pool from the 8 data drives, and deploys Frigate NVR with Coral
TPU object detection and CPU video decode.
> **No GPU in VM 100.** The Coral handles all AI inference. Frigate uses
> CPU decode for camera streams — perfectly adequate on dual Xeons. If you
> later add a second GPU and pass it to VM 100, enable NVDEC in
> `frigate/config.yml` under `ffmpeg.hwaccel_args`.
**Prerequisites:**
- VM 100 running Ubuntu Server 24.04.4 with SSH access (Phase 11)
- NVIDIA GPU passed through (PCIe device visible in guest)
- Google Coral USB passed through (USB device visible in guest)
- 8 raw data drives visible as block devices inside the VM
- Frigate config files from this repo (`frigate/docker-compose.yml` and
@@ -2517,90 +2537,30 @@ sudo -i
---
### Step 12.2 — Verify the GPU is visible
### Step 12.2 — Verify the Coral USB is visible
```bash
lspci | grep -i nvidia
lsusb | grep -i "1a6e\|18d1"
```
Expected:
Expected (one or both IDs depending on firmware load state):
```
06:10.0 VGA compatible controller: NVIDIA Corporation GP106GL [Quadro P2200] (rev a1)
06:10.1 Audio device: NVIDIA Corporation GP106 High Definition Audio Controller (rev a1)
Bus 001 Device 003: ID 1a6e:089a Global Unichip Corp.
Bus 001 Device 004: ID 18d1:9302 Google Inc.
```
> **The PCI address inside the VM (e.g. `06:10.0`) will differ from the host
> address (`04:00.0`).** QEMU re-numbers the virtual PCIe bus. This is normal.
If neither appears, check that `usb0` and `usb1` are set correctly in
`/etc/pve/qemu-server/100.conf` on the Proxmox host and that the Coral
is physically plugged in.
If neither device appears, check that `hostpci0` is set correctly in
`/etc/pve/qemu-server/100.conf` on the Proxmox host, and that Phase 10
completed successfully (GPU showing `vfio-pci` on the host).
> **If you later add a second GPU to VM 100** for hardware decode, install
> the NVIDIA driver (`apt install -y nvidia-driver-535`), reboot, verify
> with `nvidia-smi`, then enable hwaccel in `frigate/config.yml`.
---
### Step 12.3 — Install the NVIDIA driver
```bash
apt update
apt install -y nvidia-driver-535
```
This installs the driver and all required kernel modules. Takes 2–4 minutes.
> If the installer asks about Secure Boot MOK (Machine Owner Key), press OK
> to dismiss — Secure Boot is off in this VM (pre-enrolled-keys was unchecked
> in Phase 11), so the prompt has no effect.
Reboot the VM to load the driver:
```bash
reboot
```
SSH back in after ~30 seconds:
```bash
ssh ubuntu@192.168.1.XXX
sudo -i
```
---
### Step 12.4 — Verify nvidia-smi
```bash
nvidia-smi
```
Expected output:
```
+-----------------------------------------------------------------------------------------+
| NVIDIA-SMI 535.xxx.xx Driver Version: 535.xxx.xx CUDA Version: 12.x |
|-----------------------------------------+------------------------+----------------------|
| GPU Name Persistence-M | Bus-Id Disp.A | Volatile Uncorr. ECC |
|=========================================+========================+======================|
| 0 Quadro P2200 Off | 00000000:06:10.0 Off | N/A |
| 41% 42C P8 10W / 75W | 0MiB / 5120MiB | 0% Default |
+-----------------------------------------------------------------------------------------+
```
Key things to verify:
- **Driver Version: 535.xxx.xx** — driver loaded
- GPU model matches your installed card
- **5120 MiB** — full 5 GB memory visible (not a partial amount)
If `nvidia-smi` returns `No devices were found`:
```bash
dmesg | grep -i nvidia | tail -20
```
Look for Secure Boot signature errors. If present, confirm `pre-enrolled-keys=0`
in the VM's `efidisk0` line in Proxmox.
---
### Step 12.5 — Install Docker
### Step 12.3 — Install Docker
```bash
curl -fsSL https://get.docker.com | sh
@@ -2625,47 +2585,7 @@ systemctl enable docker
---
### Step 12.6 — Install NVIDIA Container Toolkit
This allows Docker containers to access the GPU. Without it Frigate cannot use
the GPU for hardware video decode.
```bash
curl -fsSL https://nvidia.github.io/libnvidia-container/gpgkey \
| gpg --dearmor -o /usr/share/keyrings/nvidia-container-toolkit-keyring.gpg
curl -s -L https://nvidia.github.io/libnvidia-container/stable/deb/nvidia-container-toolkit.list \
| sed 's#deb https://#deb [signed-by=/usr/share/keyrings/nvidia-container-toolkit-keyring.gpg] https://#g' \
| tee /etc/apt/sources.list.d/nvidia-container-toolkit.list
apt update
apt install -y nvidia-container-toolkit
nvidia-ctk runtime configure --runtime=docker
systemctl restart docker
```
Expected output from `nvidia-ctk`:
```
INFO Configured /etc/docker/daemon.json
```
---
### Step 12.7 — Test GPU access in Docker
```bash
docker run --rm --runtime=nvidia --gpus all ubuntu nvidia-smi
```
Expected: the same `nvidia-smi` table from Step 12.4, now running inside a
container. If you see `Error: no runtime "nvidia"`, run
`systemctl restart docker` and try again.
---
### Step 12.8 — Verify Coral USB
### Step 12.4 — Verify Coral USB
```bash
lsusb
@@ -2689,7 +2609,7 @@ the R730xd.
---
### Step 12.9 — Create the ZFS storage pool
### Step 12.5 — Create the ZFS storage pool
Check which block devices are the data drives (the large ones — not the 64 GB
OS disk):
@@ -2769,7 +2689,7 @@ With 8 × 4TB drives in RAIDZ2, expect roughly 22–24 TB usable.
---
### Step 12.10 — Get the Frigate config files
### Step 12.6 — Get the Frigate config files
Clone the repo into the VM:
@@ -2787,7 +2707,7 @@ cp /opt/local_proxmox/frigate/config.yml /opt/frigate/
---
### Step 12.11 — Edit docker-compose.yml
### Step 12.7 — Edit docker-compose.yml
```bash
nano /opt/frigate/docker-compose.yml
@@ -2811,7 +2731,7 @@ Save: **Ctrl+O**, Enter, **Ctrl+X**.
---
### Step 12.12 — Edit config.yml and add your cameras
### Step 12.8 — Edit config.yml and add your cameras
```bash
nano /opt/frigate/config.yml
@@ -2840,12 +2760,11 @@ Common RTSP path formats by brand:
| Reolink | `rtsp://user:{password}@IP/h264Preview_01_main` |
| Amcrest | `rtsp://user:{password}@IP/cam/realmonitor?channel=1&subtype=0` |
For H.265 cameras, uncomment the per-camera hwaccel override:
```yaml
ffmpeg:
hwaccel_args: preset-nvidia-h265
```
> **If you later add a GPU to VM 100:** enable hardware decode per camera:
> ```yaml
> ffmpeg:
> hwaccel_args: preset-nvidia-h265 # or preset-nvidia-h264
> ```
To add more cameras, duplicate the entire `front_door:` block (including
indentation) and change the name and IP.
@@ -2854,7 +2773,7 @@ Save: **Ctrl+O**, Enter, **Ctrl+X**.
---
### Step 12.13 — Start Frigate
### Step 12.9 — Start Frigate
```bash
cd /opt/frigate
@@ -2875,14 +2794,14 @@ A successful start looks like:
```
frigate | [INFO] Starting Frigate...
frigate | [INFO] Connected to EdgeTPU device: usb
frigate | [INFO] Loading NVIDIA GPU: &lt;your GPU model&gt;
frigate | [INFO] Loading Coral Edge TPU
frigate | [INFO] Starting camera: front_door
frigate | [INFO] Frigate is running
```
Key lines:
- **Connected to EdgeTPU device: usb** — Coral detected, inference running
- **Loading NVIDIA GPU** — NVDEC hardware decode active
- **Loading Coral Edge TPU** — Coral inference active
- **Starting camera: [name]** — stream connected
Press **Ctrl+C** to stop following logs. Frigate continues running in the
@@ -2902,7 +2821,7 @@ background.
---
### Step 12.14 — Access the Frigate web UI
### Step 12.10 — Access the Frigate web UI
In a browser on your workstation:
@@ -2912,9 +2831,9 @@ http://192.168.1.XXX:5000
The Frigate dashboard shows live camera feeds, detection events, and system
stats. Navigate to **System → Stats** to confirm:
- GPU utilization is shown (your GPU model)
- Coral inference is running
- CPU usage is low (NVDEC handling decode, Coral handling detection)
- CPU usage is moderate (software decode) — add a GPU later to reduce it
---
@@ -2922,11 +2841,10 @@ stats. Navigate to **System → Stats** to confirm:
| What is done | Status |
|---|---|
| NVIDIA driver 535 installed, verified with nvidia-smi | ✓ |
| Docker and NVIDIA Container Toolkit configured | ✓ |
| GPU accessible inside Docker containers | ✓ |
| ZFS RAIDZ2 pool created from 8 data drives | ✓ |
| Frigate running with NVDEC decode and Coral inference | ✓ |
| Frigate running with Coral inference and CPU decode | ✓ |
| Cameras configured in config.yml | ✓ |
| Web UI accessible at http://vm100-ip:5000 | ✓ |
@@ -2939,8 +2857,8 @@ stats. Navigate to **System → Stats** to confirm:
| Hardware | Dell R730xd, PERC H730, 12 drives, NVIDIA GPU, Coral USB | ✓ |
| Proxmox host | IOMMU active, GPU held by vfio-pci | ✓ |
| Services | fan-control (quiet fans), stagger-spinup (PSU protection) | ✓ |
| VM 100 | Ubuntu Server 24.04.4, GPU passthrough, 8 drives, Frigate NVR | ✓ |
| VM 101 | Ubuntu Desktop 24.04.4, no GPU, 2 drives | ready |
| VM 100 | Ubuntu Server 24.04.4, Coral TPU, 8 drives, Frigate NVR (CPU decode) | ✓ |
| VM 101 | Ubuntu Desktop 24.04.4, GPU passthrough, 2 drives | ready |
| VM 102 | Ubuntu Server 24.04.4, 2 drives | ready |
---
@@ -2993,7 +2911,7 @@ perccli /c0 /eall /sall show
# State should be "JBOD" or "UGood" — not "Offln" or "Msng"
```
### nvidia-smi: No devices were found (in guest VM)
### nvidia-smi: No devices were found (in VM 101)
```bash
# Check dmesg in the guest: