root/ubuntu-post-install
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
Files
dc1552f5d37de5c380a37f85af3ddee01749598f
ubuntu-post-install/services/frigate-audio.sh
T
Claude 4b7a2c050b services: add standalone bootstrap to crowdsec, ddclient, emby, fmd, frigate-audio, frigate-notify 
Each service can now be run directly with sudo bash <service>.sh on any
machine with Docker installed, without needing the full post-install repo.
Uses the shared bootstrap pattern from docs/standalone-template.sh.

https://claude.ai/code/session_014CCYqVwW6d6f5dw1qRokYt
2026-06-08 17:01:35 +00:00

724 lines
27 KiB
Bash
Raw Blame History

#!/bin/bash
# services/frigate-audio.sh — Frigate NVR + Mosquitto MQTT + frigate-notify
# full-stack with audio support and push notifications via ntfy.
# Part of the modular post-install system (sourced by setup.sh).
#
# Can also be run standalone on any machine:
# sudo bash frigate-audio.sh
# (Docker must already be installed when run standalone)
#
# Based on outis1one/frigate_w_audio. This is the full stack:
# Frigate 0.17 NVR, face recognition, LPR, motion detection
# Mosquitto MQTT broker (events bus between Frigate and notify)
# frigate-notify Event consumer — sends ntfy push notifications
#
# Audio is OFF by default in the Frigate config (audio.enabled: false).
# To enable it you need at least one camera with a working microphone —
# see the HOW TO ADD A CAMERA WITH A MIC section in the generated config.yml.
#
# Hardware acceleration and Coral TPU are opt-in during setup; the
# default falls back to CPU detection so the stack runs everywhere.
#
# Differs from services/frigate.sh (simpler, standalone Frigate only):
# • includes Mosquitto + frigate-notify
# • audio-ready camera config template
# • Frigate 0.17 schema with face recognition + LPR pre-configured
# ── Standalone bootstrap ──────────────────────────────────────────────────────
# Detected when the script is executed directly rather than sourced by setup.sh.
# Sets up helpers and globals, then defers execution until after the function
# definition at the bottom of this file.
if [[ "${BASH_SOURCE[0]}" == "${0}" ]]; then
[[ "$(id -u)" == "0" ]] || { echo "Run with sudo: sudo bash $0"; exit 1; }
_SELF_DIR="$(cd "$(dirname "${BASH_SOURCE[0]}")" && pwd)"
_COMMON="$_SELF_DIR/../lib/common.sh"
if [[ -f "$_COMMON" ]]; then
# Full repo present — use the real helpers (picks up ~/docker/.config too)
# shellcheck source=../lib/common.sh
source "$_COMMON"
else
# One-off copy — inline minimal stubs so the script works without the repo
log_info() { echo -e "\033[0;34m[INFO]\033[0m $*"; }
log_success() { echo -e "\033[0;32m[OK]\033[0m $*"; }
log_warning() { echo -e "\033[1;33m[WARN]\033[0m $*"; }
log_error() { echo -e "\033[0;31m[ERROR]\033[0m $*" >&2; }
require_docker() {
command -v docker &>/dev/null || {
log_error "Docker not found. Install it first:"
log_error " curl -fsSL https://get.docker.com | sudo sh"
return 1
}
docker compose version &>/dev/null || {
log_error "Docker Compose plugin missing:"
log_error " sudo apt-get install -y docker-compose-plugin"
return 1
}
}
ensure_docker_dir_ownership() {
chown -R "$ACTUAL_USER:$ACTUAL_USER" "$@" 2>/dev/null || true
}
generate_password() {
local _len="${1:-32}"
tr -dc 'a-zA-Z0-9' < /dev/urandom | head -c "$_len"
}
# Match common.sh's eval-based pattern so local vars in install_* are set correctly
prompt_text() {
local _q="$1" _def="$2" _var="$3" _r
[[ "${UNATTENDED:-false}" == "true" ]] && { eval "$_var='$_def'"; return; }
read -r -p " $_q " _r
eval "$_var='${_r:-$_def}'"
}
prompt_yn() {
local _q="$1" _def="$2" _var="$3" _r
[[ "${UNATTENDED:-false}" == "true" ]] && { eval "$_var='$_def'"; return; }
read -r -p " $_q " _r
eval "$_var='${_r:-$_def}'"
}
configure_caddy_for_service() {
local _name="$1" _upstream="$2" _subdomain="$3" _extra="${4:-}"
local _caddy_dir="$DOCKER_DIR/caddy"
local _caddyfile="$_caddy_dir/Caddyfile"
if [[ ! -d "$_caddy_dir" ]]; then
log_info "Access $_name directly on port ${_upstream##*:}."
return 0
fi
echo ""
local _do_caddy=""
read -r -p " Configure Caddy reverse proxy for $_name? [y/N]: " _do_caddy
[[ "${_do_caddy,,}" == "y" ]] || {
log_info "Skipping — access at: http://localhost:${_upstream##*:}"
return 0
}
local _domain=""
read -r -p " Domain (e.g. ${_subdomain}.${SITE_DOMAIN:-example.com}): " _domain
[[ -n "$_domain" ]] || { log_warning "No domain entered — skipping Caddy."; return 0; }
# Back up before touching
if [[ -f "$_caddyfile" ]]; then
local _bk="$_caddy_dir/Caddyfile.backup.$(date +%Y%m%d-%H%M%S)"
cp "$_caddyfile" "$_bk"
log_info "Backed up Caddyfile to $(basename "$_bk")"
else
touch "$_caddyfile"
fi
# Remove existing block for this domain if present
if grep -q "^${_domain}" "$_caddyfile" 2>/dev/null; then
log_warning "$_domain already in Caddyfile"
local _ow=""
read -r -p " Overwrite? [y/N]: " _ow
[[ "${_ow,,}" == "y" ]] || { log_info "Keeping existing entry."; return 0; }
sed -i "/^${_domain}/,/^}/d" "$_caddyfile"
fi
cat >> "$_caddyfile" << CBLOCK
# $_name
$_domain {
reverse_proxy $_upstream
header {
Strict-Transport-Security "max-age=31536000; includeSubDomains; preload"
X-Content-Type-Options "nosniff"
X-Frame-Options "SAMEORIGIN"
Referrer-Policy "strict-origin-when-cross-origin"
}
log {
output file /var/log/caddy/${_domain}.log
format json
}
${_extra}
}
CBLOCK
log_success "Added $_domain to Caddyfile"
docker exec caddy caddy fmt --overwrite /etc/caddy/Caddyfile 2>/dev/null || true
if docker exec caddy caddy reload --config /etc/caddy/Caddyfile 2>/dev/null; then
log_success "$_name accessible at: https://$_domain"
else
log_warning "Reload failed — check: docker logs caddy"
log_info "Manual reload: docker exec caddy caddy reload --config /etc/caddy/Caddyfile"
fi
}
write_readme() {
local _dir="$1"; shift
mkdir -p "$_dir"
cat > "$_dir/README.md"
}
fi
# Globals — ACTUAL_USER/ACTUAL_HOME must come before DOCKER_DIR
# ($HOME under sudo is /root, not the real user's home)
ACTUAL_USER="${ACTUAL_USER:-${SUDO_USER:-$USER}}"
ACTUAL_HOME="$(getent passwd "$ACTUAL_USER" 2>/dev/null | cut -d: -f6 || echo "${HOME:-/root}")"
DOCKER_DIR="${DOCKER_DIR:-$ACTUAL_HOME/docker}"
DRY_RUN="${DRY_RUN:-false}"
UNATTENDED="${UNATTENDED:-false}"
SITE_TZ="${SITE_TZ:-$(cat /etc/timezone 2>/dev/null || echo UTC)}"
SITE_DOMAIN="${SITE_DOMAIN:-example.com}"
SITE_CADDY_NET="${SITE_CADDY_NET:-caddy_net}"
register_service() { :; } # no-op — no wizard to register into
_RUN_STANDALONE=1
fi
# ─────────────────────────────────────────────────────────────────────────────
register_service frigate-audio cameras "Frigate NVR + MQTT + push notifications (audio-ready stack)" 8971
install_frigate-audio() {
require_docker || return 1
local DIR="$DOCKER_DIR/frigate-audio"
if [ "$DRY_RUN" = true ]; then
echo "[DRY-RUN] frigate-audio would:"
echo " Create $DIR with Frigate + Mosquitto + frigate-notify stack"
echo " Prompt for camera RTSP credentials, IPs, MQTT password, ntfy server"
echo " Generate docker-compose.yml, frigate config, mosquitto config, .env"
echo " Bootstrap the Mosquitto password file"
return 0
fi
echo ""
echo "╔═══════════════════════════════════════════════════════════════╗"
echo "║ Frigate + Mosquitto + frigate-notify (audio-ready stack) ║"
echo "║ Face recognition · LPR · ntfy push alerts ║"
echo "╚═══════════════════════════════════════════════════════════════╝"
echo ""
# ── Media storage path ─────────────────────────────────────────────────────
log_info "Frigate media storage (recordings, snapshots)"
echo " Recordings can fill tens of GB quickly — a dedicated drive is recommended."
echo ""
local FRIGATE_MEDIA_DIR=""
local DEFAULT_MEDIA="$DOCKER_DIR/frigate-audio/media"
if declare -f select_storage_path &>/dev/null; then
select_storage_path "Frigate recordings" FRIGATE_MEDIA_DIR
[ -z "$FRIGATE_MEDIA_DIR" ] && FRIGATE_MEDIA_DIR="$DEFAULT_MEDIA"
else
prompt_text "Frigate media path [$DEFAULT_MEDIA]:" "$DEFAULT_MEDIA" FRIGATE_MEDIA_DIR
fi
log_info "Media path: $FRIGATE_MEDIA_DIR"
# ── Camera credentials ─────────────────────────────────────────────────────
echo ""
log_info "Camera 1 — Front Door (required)"
local CAM1_USER="" CAM1_PASS="" CAM1_IP=""
prompt_text " RTSP username [admin]:" "admin" CAM1_USER
prompt_text " RTSP password:" "" CAM1_PASS
prompt_text " Camera IP [192.168.1.100]:" "192.168.1.100" CAM1_IP
echo ""
log_info "Camera 2 — Back Door (optional, press Enter to skip IP)"
local CAM2_USER="" CAM2_PASS="" CAM2_IP=""
prompt_text " RTSP username [admin]:" "admin" CAM2_USER
prompt_text " RTSP password [changeme]:" "changeme" CAM2_PASS
prompt_text " Camera IP (Enter to disable):" "" CAM2_IP
echo ""
log_info "Camera 3 — Third camera (optional)"
local CAM3_USER="" CAM3_PASS="" CAM3_IP=""
prompt_text " RTSP username [admin]:" "admin" CAM3_USER
prompt_text " RTSP password [changeme]:" "changeme" CAM3_PASS
prompt_text " Camera IP (Enter to disable):" "" CAM3_IP
# ── MQTT password ──────────────────────────────────────────────────────────
echo ""
log_info "MQTT credentials (Frigate ↔ Mosquitto ↔ frigate-notify)"
local MQTT_PASS=""
prompt_text " MQTT username [frigate]:" "frigate" MQTT_USER
if [ -z "${MQTT_USER:-}" ]; then MQTT_USER="frigate"; fi
MQTT_PASS=$(generate_password 24)
log_info " Generated MQTT password: $MQTT_PASS"
# ── ntfy server ─────────────────────────────────────────────────────────
echo ""
log_info "ntfy push notifications"
echo " frigate-notify sends alerts via ntfy. Set to your ntfy server URL."
local NTFY_SERVER="" NTFY_TOPIC="frigate"
prompt_text " ntfy server URL [https://ntfy.yourdomain.com]:" "https://ntfy.yourdomain.com" NTFY_SERVER
prompt_text " ntfy topic [frigate]:" "frigate" NTFY_TOPIC
# ── Frigate public URL ─────────────────────────────────────────────────────
echo ""
local BASE_DOMAIN="${SITE_DOMAIN:-}"
local FRIGATE_PUBLIC_URL=""
if [ -n "$BASE_DOMAIN" ]; then
local _PFX=""
prompt_text " Subdomain prefix for Frigate [cam].${BASE_DOMAIN}:" "cam" _PFX
FRIGATE_PUBLIC_URL="https://${_PFX:-cam}.${BASE_DOMAIN}"
else
prompt_text " Frigate public URL [https://cam.yourdomain.com]:" "https://cam.yourdomain.com" FRIGATE_PUBLIC_URL
fi
# ── Detector choice ────────────────────────────────────────────────────────
echo ""
log_info "Object detector"
echo " 1) CPU (works everywhere, higher CPU usage)"
echo " 2) USB Coral TPU (faster detection, lower CPU — requires USB Coral stick)"
echo " 3) PCIe Coral TPU"
local DET_CHOICE=""
prompt_text "Detector [1]:" "1" DET_CHOICE
local DETECTOR_BLOCK HWA_COMMENT
case "${DET_CHOICE:-1}" in
2) DETECTOR_BLOCK="detectors:\n coral:\n type: edgetpu\n device: usb"
HWA_COMMENT=" devices:\n - /dev/bus/usb:/dev/bus/usb # USB Coral" ;;
3) DETECTOR_BLOCK="detectors:\n coral:\n type: edgetpu\n device: pci"
HWA_COMMENT=" devices:\n - /dev/apex_0:/dev/apex_0 # PCIe Coral" ;;
*) DETECTOR_BLOCK="detectors:\n cpu:\n type: cpu\n num_threads: 3"
HWA_COMMENT="" ;;
esac
# ── Hardware acceleration for re-encoding ──────────────────────────────────
echo ""
local HWA=""
prompt_yn " Enable hardware video decode (Intel/AMD /dev/dri/renderD128)? (y/n) [n]:" "n" HWA
local DRI_LINE=""
[[ ${HWA:-n} =~ ^[Yy]$ ]] && DRI_LINE=" - /dev/dri/renderD128 # Intel/AMD hwaccel"
# ── Create directory structure ─────────────────────────────────────────────
mkdir -p "$DIR"/{frigate_config,mosquitto/config,mosquitto/data,mosquitto/log,"frigate-notify"}
mkdir -p "$FRIGATE_MEDIA_DIR"
ensure_docker_dir_ownership "$DIR"
cd "$DIR" || return 1
# ── .env ──────────────────────────────────────────────────────────────────
log_info "Writing .env..."
cat > "$DIR/.env" << ENVEOF
# Frigate audio stack — generated by setup.sh
# DO NOT commit this file — it contains credentials.
# ---- Camera 1: Front Door ----
FRIGATE_RTSP_USER=${CAM1_USER:-admin}
FRIGATE_RTSP_PASSWORD=${CAM1_PASS:-changeme}
FRIGATE_FRONT_DOOR_IP=${CAM1_IP:-192.168.1.100}
# ---- Camera 2: Back Door ----
FRIGATE_RTSP_USER1=${CAM2_USER:-admin}
FRIGATE_RTSP_PASSWORD1=${CAM2_PASS:-changeme}
FRIGATE_BACK_DOOR_IP=${CAM2_IP:-192.168.1.101}
# ---- Camera 3 (optional) ----
FRIGATE_RTSP_USER2=${CAM3_USER:-admin}
FRIGATE_RTSP_PASSWORD2=${CAM3_PASS:-changeme}
FRIGATE_SQUIRREL_IP=${CAM3_IP:-192.168.1.102}
# ---- MQTT ----
FRIGATE_MQTT_USER=${MQTT_USER:-frigate}
FRIGATE_MQTT_PASSWORD=${MQTT_PASS}
# ---- frigate-notify ----
FN_FRIGATE__MQTT__PASSWORD=${MQTT_PASS}
FN_FRIGATE__SERVER=http://frigate:5000
FN_FRIGATE__PUBLIC_URL=${FRIGATE_PUBLIC_URL}
FN_ALERTS__NTFY__SERVER=${NTFY_SERVER}
CADDY_NET=$SITE_CADDY_NET
ENVEOF
chmod 600 "$DIR/.env"
log_success ".env written"
# ── docker-compose.yml ─────────────────────────────────────────────────────
log_info "Writing docker-compose.yml..."
local DEVICES_BLOCK=""
[ -n "$HWA_COMMENT" ] && DEVICES_BLOCK=" devices:\n${HWA_COMMENT}"
[ -n "$DRI_LINE" ] && DEVICES_BLOCK="${DEVICES_BLOCK}\n ${DRI_LINE}"
if [ -n "$DET_CHOICE" ] && [ "$DET_CHOICE" = "2" ]; then
DEVICES_BLOCK=" devices:\n${HWA_COMMENT}"
[ -n "$DRI_LINE" ] && DEVICES_BLOCK="${DEVICES_BLOCK}\n ${DRI_LINE}"
fi
cat > "$DIR/docker-compose.yml" << 'COMPOSEEOF'
# Frigate NVR + Mosquitto MQTT + frigate-notify
# Generated by ubuntu-post-install setup.sh
name: frigate-audio
services:
frigate:
container_name: frigate-audio
image: ghcr.io/blakeblackshear/frigate:0.17.1
restart: unless-stopped
stop_grace_period: 30s
privileged: true
shm_size: "512mb"
env_file: .env
depends_on:
- mosquitto
COMPOSEEOF
# Inject devices block if hardware acceleration chosen
if [ -n "$HWA_COMMENT" ] || [ -n "$DRI_LINE" ]; then
echo " devices:" >> "$DIR/docker-compose.yml"
[ -n "$HWA_COMMENT" ] && printf " %s\n" "$HWA_COMMENT" | sed 's|^ *||' >> "$DIR/docker-compose.yml"
[ -n "$DRI_LINE" ] && echo " $DRI_LINE" >> "$DIR/docker-compose.yml"
fi
cat >> "$DIR/docker-compose.yml" << COMPOSEEOF
volumes:
- /etc/localtime:/etc/localtime:ro
- ./frigate_config:/config
- ${FRIGATE_MEDIA_DIR}:/media/frigate
- type: tmpfs
target: /tmp/cache
tmpfs:
size: 1000000000
ports:
- "8971:8971"
- "5001:5000"
- "8554:8554"
- "8555:8555/tcp"
- "8555:8555/udp"
networks:
- caddy_net
healthcheck:
test: ["CMD", "curl", "-f", "http://127.0.0.1:5000/api/version"]
interval: 10s
timeout: 5s
retries: 12
start_period: 60s
mosquitto:
container_name: frigate-audio-mqtt
hostname: mosquitto
image: eclipse-mosquitto:2
restart: unless-stopped
ports:
- "1883:1883"
volumes:
- ./mosquitto/config:/mosquitto/config
- ./mosquitto/data:/mosquitto/data
- ./mosquitto/log:/mosquitto/log
frigate-notify:
container_name: frigate-audio-notify
hostname: frigate-notify
image: ghcr.io/0x2142/frigate-notify:latest
restart: unless-stopped
env_file: .env
depends_on:
mosquitto:
condition: service_started
frigate:
condition: service_healthy
volumes:
- ./frigate-notify/config.yml:/app/config.yml:ro
networks:
caddy_net:
external: true
name: \${CADDY_NET:-caddy_net}
COMPOSEEOF
log_success "docker-compose.yml written"
# ── Mosquitto config ───────────────────────────────────────────────────────
log_info "Writing Mosquitto config..."
cat > "$DIR/mosquitto/config/mosquitto.conf" << 'MQTTEOF'
listener 1883 0.0.0.0
protocol mqtt
persistence true
persistence_location /mosquitto/data/
log_dest stdout
log_dest file /mosquitto/log/mosquitto.log
allow_anonymous false
password_file /mosquitto/config/passwd
MQTTEOF
# Bootstrap the Mosquitto password file
log_info "Bootstrapping Mosquitto password file..."
if docker run --rm -i eclipse-mosquitto:2 \
mosquitto_passwd -b -c /dev/stdout "$MQTT_USER" "$MQTT_PASS" \
> "$DIR/mosquitto/config/passwd" 2>/dev/null; then
log_success "Mosquitto passwd file created"
else
log_warning "Could not bootstrap Mosquitto passwd — do it manually:"
log_warning " docker run --rm eclipse-mosquitto:2 mosquitto_passwd -b -c /passwd ${MQTT_USER} '${MQTT_PASS}'"
log_warning " Then copy the output to ${DIR}/mosquitto/config/passwd"
fi
# ── Frigate config.yml ─────────────────────────────────────────────────────
log_info "Writing Frigate config..."
local CAM2_ENABLED="false"; [ -n "$CAM2_IP" ] && CAM2_ENABLED="true"
local CAM3_ENABLED="false"; [ -n "$CAM3_IP" ] && CAM3_ENABLED="true"
local DETECTOR_YAML
case "${DET_CHOICE:-1}" in
2) DETECTOR_YAML="detectors:\n coral:\n type: edgetpu\n device: usb" ;;
3) DETECTOR_YAML="detectors:\n coral:\n type: edgetpu\n device: pci" ;;
*) DETECTOR_YAML="detectors:\n cpu:\n type: cpu\n num_threads: 3" ;;
esac
cat > "$DIR/frigate_config/config.yml" << FRIGCFGEOF
version: 0.17-0
mqtt:
enabled: true
host: mosquitto
port: 1883
user: "{FRIGATE_MQTT_USER}"
password: "{FRIGATE_MQTT_PASSWORD}"
topic_prefix: frigate
client_id: frigate
stats_interval: 60
tls:
enabled: false
# Audio detection — set true when you have a camera with a working mic.
# See the HOW TO ADD A CAMERA WITH A MIC section at the bottom of this file.
audio:
enabled: false
$(printf "$DETECTOR_YAML")
birdseye:
mode: continuous
semantic_search:
enabled: false
model_size: small
face_recognition:
enabled: true
model_size: small
lpr:
enabled: true
model_size: small
objects:
track:
- person
record:
enabled: true
continuous:
days: 0
motion:
days: 10
go2rtc:
streams:
front_door:
- rtsp://{FRIGATE_RTSP_USER}:{FRIGATE_RTSP_PASSWORD}@{FRIGATE_FRONT_DOOR_IP}:554/Streaming/Channels/101
back_door:
- rtsp://{FRIGATE_RTSP_USER1}:{FRIGATE_RTSP_PASSWORD1}@{FRIGATE_BACK_DOOR_IP}:554/Streaming/Channels/101
squirrel:
- rtsp://{FRIGATE_RTSP_USER2}:{FRIGATE_RTSP_PASSWORD2}@{FRIGATE_SQUIRREL_IP}:554/Streaming/Channels/101
cameras:
front_door:
enabled: true
ffmpeg:
inputs:
- path: rtsp://127.0.0.1:8554/front_door
input_args: preset-rtsp-restream
roles:
- detect
- record
detect:
enabled: true
width: 2688
height: 1520
fps: 5
back_door:
enabled: ${CAM2_ENABLED}
ffmpeg:
inputs:
- path: rtsp://127.0.0.1:8554/back_door
input_args: preset-rtsp-restream
roles:
- detect
- record
detect:
enabled: true
width: 2688
height: 1520
fps: 5
squirrel:
enabled: ${CAM3_ENABLED}
ffmpeg:
inputs:
- path: rtsp://127.0.0.1:8554/squirrel
input_args: preset-rtsp-restream
roles:
- detect
- record
detect:
enabled: true
width: 2688
height: 1520
fps: 5
##############################################################################
# HOW TO ADD A CAMERA WITH A MIC
#
# 1. Set audio.enabled: true at the top of this file.
#
# 2. In go2rtc.streams, add the audio transcode line:
# your_cam:
# - rtsp://{FRIGATE_RTSP_USER3}:{FRIGATE_RTSP_PASSWORD3}@{IP}:554/path#backchannel=0
# - "ffmpeg:your_cam#audio=aac#audio=opus"
#
# 3. In cameras, add the 'audio' role and audio-aware record preset:
# your_cam:
# enabled: true
# ffmpeg:
# output_args:
# record: preset-record-generic-audio-aac
# inputs:
# - path: rtsp://127.0.0.1:8554/your_cam
# input_args: preset-rtsp-restream
# roles:
# - detect
# - record
# - audio
#
# 4. Add credentials to .env:
# FRIGATE_RTSP_USER3=admin
# FRIGATE_RTSP_PASSWORD3=yourpass
#
# 5. RTSP paths by vendor:
# Hikvision / Hikvision OEM: /Streaming/Channels/101 (main), /102 (sub)
# Dahua / Dahua OEM: /cam/realmonitor?channel=1&subtype=0 (main)
##############################################################################
FRIGCFGEOF
log_success "Frigate config.yml written"
# ── frigate-notify config.yml ─────────────────────────────────────────────
log_info "Writing frigate-notify config..."
cat > "$DIR/frigate-notify/config.yml" << FNEOF
## frigate-notify config
## Docs: https://frigate-notify.0x2142.com
## Secrets come from .env via FN_* environment variables.
frigate:
server: # FN_FRIGATE__SERVER
ignoressl: true
public_url: # FN_FRIGATE__PUBLIC_URL
startup_check:
attempts: 5
interval: 30
mqtt:
enabled: true
server: mosquitto
port: 1883
clientid: frigate-notify
username: ${MQTT_USER:-frigate}
password: # FN_FRIGATE__MQTT__PASSWORD
topic_prefix: frigate
alerts:
general:
title: 'Frigate - {{ if .SubLabel }}{{ .SubLabel }}{{ else }}{{ .Label }}{{ end }} at {{ .Camera }}'
nosnap: allow
recheck_delay: 10
ntfy:
enabled: true
server: # FN_ALERTS__NTFY__SERVER
topic: "${NTFY_TOPIC:-frigate}"
ignoressl: false
headers:
- X-Priority: '{{ if .SubLabel }}3{{ else }}4{{ end }}'
- X-Tags: '{{ if .SubLabel }}wave{{ else }}rotating_light{{ end }}'
template: |
{{ if .SubLabel -}}{{ .SubLabel }}{{ else }}{{ .Label }}{{ end }} at {{ .Camera }}
{{- if gt (len .CurrentZones) 0 }}
Zone: {{ range \$i, \$z := .CurrentZones }}{{ if \$i }}, {{ end }}{{ \$z }}{{ end }}{{ end }}
Score: {{ printf "%.0f" (mul .TopScore 100) }}%
Time: {{ .StartTime.Format "Mon 3:04 PM" }}
monitor:
enabled: false
discord:
enabled: false
gotify:
enabled: false
smtp:
enabled: false
telegram:
enabled: false
pushover:
enabled: false
webhook:
enabled: false
FNEOF
log_success "frigate-notify config.yml written"
# ── Caddy snippet ──────────────────────────────────────────────────────────
if [ -n "$FRIGATE_PUBLIC_URL" ] && [ "$FRIGATE_PUBLIC_URL" != "https://cam.yourdomain.com" ]; then
local _DOM="${FRIGATE_PUBLIC_URL#https://}"
configure_caddy_for_service "Frigate" "frigate-audio:8971" "frigate-audio" || true
fi
ensure_docker_dir_ownership "$DIR"
# ── Summary ────────────────────────────────────────────────────────────────
echo ""
echo "═══════════════════════════════════════════════════════"
echo " Frigate Audio Stack — Setup Complete"
echo "═══════════════════════════════════════════════════════"
echo ""
echo " Directory: $DIR"
echo " Media: $FRIGATE_MEDIA_DIR"
echo " Public URL: $FRIGATE_PUBLIC_URL"
echo " MQTT user: ${MQTT_USER:-frigate}"
echo " ntfy server: $NTFY_SERVER topic: ${NTFY_TOPIC:-frigate}"
echo ""
echo " Before starting:"
echo " 1. Edit frigate_config/config.yml — adjust RTSP paths for your cameras"
echo " (paths vary by vendor; check your camera's manual)"
echo " 2. Edit frigate_config/config.yml — remove/adjust motion masks"
echo " (the masks are blanks — add yours via the Frigate UI after first run)"
echo " 3. Verify .env credentials are correct"
echo ""
echo " Start:"
echo " cd $DIR && docker compose up -d"
echo ""
echo " Face recognition training (after Frigate is running):"
echo " — Go to Frigate UI → Faces → add face photos for household members"
echo " → In frigate-notify/config.yml, add names to alerts.sublabels.block"
echo " to silence push notifications for recognized family members."
echo ""
local START_NOW=""
prompt_yn "Start the stack now? (y/n) [n]:" "n" START_NOW
if [[ ${START_NOW:-n} =~ ^[Yy]$ ]]; then
log_info "Starting frigate-audio stack..."
if ( cd "$DIR" && docker compose up -d ); then
log_success "Stack started — Frigate UI: http://localhost:8971"
else
log_warning "Start failed — check: cd $DIR && docker compose logs"
fi
else
echo ""
log_info "When ready: cd $DIR && docker compose up -d"
fi
echo ""
}
# Run immediately when executed directly (deferred until after function definition)
[[ "${_RUN_STANDALONE:-0}" == 1 ]] && install_frigate-audio
Reference in New Issue View Git Blame Copy Permalink