Claude
d4e06914e7
New site config key: CADDY_REMOTE_HOST (set via 'sudo ./setup.sh configure'). When set, configure_caddy_for_service operates in "remote" mode instead of writing to a local Caddyfile: - Upstream uses CADDY_REMOTE_HOST:PORT (host IP, not container name) - Snippet saved to ~/docker/caddy-snippets/<subdomain>.caddy - User is shown scp/rsync commands to copy it to the Caddy machine Three modes in configure_caddy_for_service (lib/common.sh and inline stubs): local: ~/docker/caddy/ exists → write Caddyfile + reload (existing behavior) remote: CADDY_REMOTE_HOST set → save snippet, print copy instructions none: neither configured → silent return (unchanged) All 31 service standalone bootstrap stubs updated with the new logic. CADDY_REMOTE_HOST global added to all 42 standalone bootstrap sections. setup.sh configure now prompts for CADDY_REMOTE_HOST with a clear explanation. wolf.sh: add missing stubs (configure_caddy_for_service, write_readme, prompt_yn, ensure_docker_dir_ownership) and the Authelia/Caddy/start calls that were missing from the install function. https://claude.ai/code/session_014CCYqVwW6d6f5dw1qRokYt
254 lines
13 KiB
Bash
254 lines
13 KiB
Bash
#!/bin/bash
|
|
# services/sky-cam.sh — Automated sky / timelapse camera scripts.
|
|
# Part of the modular post-install system (sourced by setup.sh).
|
|
#
|
|
# Can also be run standalone on any machine:
|
|
# sudo bash sky-cam.sh
|
|
# (Docker must already be installed when run standalone)
|
|
#
|
|
# NON-DOCKER module. sky-cam produces:
|
|
# • Daily sunrise clip — speed-adjusted video, uploaded to Mattermost
|
|
# • Four Seasons timelapse — daily clips sized to Vivaldi movements' music
|
|
# • Full-day timelapse — fixed-fps timelapse of every captured image
|
|
# • Moon-track timelapse — moon tracked & cropped each visible night
|
|
# • Monthly moon-phase close-ups — NASA Dial-a-Moon images posted to MM
|
|
#
|
|
# Source: https://github.com/outis1one/sky-cam (cloned via bootstrap.sh)
|
|
# Installs systemd user timers via sky-cam's install.sh.
|
|
|
|
# ── Standalone bootstrap ──────────────────────────────────────────────────────
|
|
# Detected when the script is executed directly rather than sourced by setup.sh.
|
|
# Sets up helpers and globals, then defers execution until after the function
|
|
# definition at the bottom of this file.
|
|
if [[ "${BASH_SOURCE[0]}" == "${0}" ]]; then
|
|
[[ "$(id -u)" == "0" ]] || { echo "Run with sudo: sudo bash $0"; exit 1; }
|
|
|
|
_SELF_DIR="$(cd "$(dirname "${BASH_SOURCE[0]}")" && pwd)"
|
|
_COMMON="$_SELF_DIR/../lib/common.sh"
|
|
|
|
if [[ -f "$_COMMON" ]]; then
|
|
# Full repo present — use the real helpers (picks up ~/docker/.config too)
|
|
# shellcheck source=../lib/common.sh
|
|
source "$_COMMON"
|
|
else
|
|
# One-off copy — inline minimal stubs so the script works without the repo
|
|
log_info() { echo -e "\033[0;34m[INFO]\033[0m $*"; }
|
|
log_success() { echo -e "\033[0;32m[OK]\033[0m $*"; }
|
|
log_warning() { echo -e "\033[1;33m[WARN]\033[0m $*"; }
|
|
log_error() { echo -e "\033[0;31m[ERROR]\033[0m $*" >&2; }
|
|
|
|
run_cmd() {
|
|
"$@"
|
|
}
|
|
|
|
pip_user_install() {
|
|
pip3 --user --break-system-packages "$@" 2>/dev/null \
|
|
|| pip3 --user "$@"
|
|
}
|
|
|
|
# Match common.sh's eval-based pattern so local vars in install_* are set correctly
|
|
prompt_text() {
|
|
local _q="$1" _def="$2" _var="$3" _r
|
|
[[ "${UNATTENDED:-false}" == "true" ]] && { eval "$_var='$_def'"; return; }
|
|
read -r -p " $_q " _r
|
|
eval "$_var='${_r:-$_def}'"
|
|
}
|
|
|
|
prompt_yn() {
|
|
local _q="$1" _def="$2" _var="$3" _r
|
|
[[ "${UNATTENDED:-false}" == "true" ]] && { eval "$_var='$_def'"; return; }
|
|
read -r -p " $_q " _r
|
|
eval "$_var='${_r:-$_def}'"
|
|
}
|
|
fi
|
|
|
|
# Globals — ACTUAL_USER/ACTUAL_HOME must come before DOCKER_DIR
|
|
# ($HOME under sudo is /root, not the real user's home)
|
|
ACTUAL_USER="${ACTUAL_USER:-${SUDO_USER:-$USER}}"
|
|
ACTUAL_HOME="$(getent passwd "$ACTUAL_USER" 2>/dev/null | cut -d: -f6 || echo "${HOME:-/root}")"
|
|
DOCKER_DIR="${DOCKER_DIR:-$ACTUAL_HOME/docker}"
|
|
DRY_RUN="${DRY_RUN:-false}"
|
|
UNATTENDED="${UNATTENDED:-false}"
|
|
SITE_TZ="${SITE_TZ:-$(cat /etc/timezone 2>/dev/null || echo UTC)}"
|
|
SITE_DOMAIN="${SITE_DOMAIN:-example.com}"
|
|
SITE_CADDY_NET="${SITE_CADDY_NET:-caddy_net}"
|
|
CADDY_REMOTE_HOST="${CADDY_REMOTE_HOST:-}"
|
|
|
|
register_service() { :; } # no-op — no wizard to register into
|
|
_RUN_STANDALONE=1
|
|
fi
|
|
# ─────────────────────────────────────────────────────────────────────────────
|
|
|
|
register_service sky-cam cameras "Automated sky / timelapse camera scripts (sky-cam)"
|
|
|
|
install_sky-cam() {
|
|
local SKYCAM_DIR="$ACTUAL_HOME/sky-cam"
|
|
|
|
if [ "$DRY_RUN" = true ]; then
|
|
echo "[DRY-RUN] sky-cam would:"
|
|
echo " - Install: ffmpeg bc fonts-dejavu curl python3-pip"
|
|
echo " - pip install: suntime pytz requests skyfield Pillow numpy scipy"
|
|
echo " - Clone sky-cam to $SKYCAM_DIR via bootstrap.sh"
|
|
echo " - Edit sky-cam.conf with your location and camera names"
|
|
echo " - Copy .env.example → .env and set Mattermost credentials"
|
|
echo " - Run ./install.sh to register systemd user timers"
|
|
return 0
|
|
fi
|
|
|
|
echo ""
|
|
echo "╔═══════════════════════════════════════════════════════╗"
|
|
echo "║ sky-cam — Automated Sky & Timelapse Camera System ║"
|
|
echo "╚═══════════════════════════════════════════════════════╝"
|
|
echo ""
|
|
|
|
# ── System packages ──────────────────────────────────────────────────────
|
|
log_info "Installing system dependencies..."
|
|
run_cmd apt-get update -qq
|
|
run_cmd apt-get install -y --no-install-recommends \
|
|
ffmpeg bc fonts-dejavu curl python3-pip git
|
|
log_success "System packages installed"
|
|
|
|
# ── Python packages ──────────────────────────────────────────────────────
|
|
log_info "Installing Python packages..."
|
|
pip_user_install suntime pytz requests skyfield Pillow numpy scipy \
|
|
|| log_warning "Some pip packages may have failed — check output above"
|
|
log_success "Python packages installed"
|
|
|
|
# ── Clone sky-cam ────────────────────────────────────────────────────────
|
|
if [ -d "$SKYCAM_DIR/.git" ]; then
|
|
log_info "sky-cam already cloned at $SKYCAM_DIR — pulling latest..."
|
|
sudo -u "$ACTUAL_USER" git -C "$SKYCAM_DIR" pull --ff-only \
|
|
|| log_warning "git pull failed — continuing with existing version"
|
|
else
|
|
log_info "Cloning sky-cam from GitHub..."
|
|
sudo -u "$ACTUAL_USER" bash -c "
|
|
curl -fsSL https://raw.githubusercontent.com/outis1one/sky-cam/main/bootstrap.sh \
|
|
| bash -s -- '$SKYCAM_DIR'
|
|
" || { log_error "Failed to clone sky-cam — check internet connection"; return 1; }
|
|
log_success "sky-cam cloned to $SKYCAM_DIR"
|
|
fi
|
|
|
|
# ── Essential configuration ──────────────────────────────────────────────
|
|
echo ""
|
|
log_info "Location and camera configuration"
|
|
echo " sky-cam needs your GPS coordinates and timezone to calculate"
|
|
echo " sunrise times accurately. Use decimal degrees (e.g. 40.7128, -74.0060)."
|
|
echo ""
|
|
|
|
local LATITUDE="" LONGITUDE="" TIMEZONE="" BASE_DIR="" CAMERAS_LIST="" SUNRISE_CAM=""
|
|
prompt_text " Latitude (decimal degrees) [0.0000]:" "0.0000" LATITUDE
|
|
prompt_text " Longitude (decimal degrees) [0.0000]:" "0.0000" LONGITUDE
|
|
prompt_text " Timezone [${SITE_TZ:-America/New_York}]:" "${SITE_TZ:-America/New_York}" TIMEZONE
|
|
|
|
echo ""
|
|
echo " Camera names are short identifiers, e.g.: east north south west"
|
|
echo " These names must match the directories where your camera images are saved."
|
|
echo ""
|
|
prompt_text " Camera names (space-separated) [east]:" "east" CAMERAS_LIST
|
|
prompt_text " Sunrise camera (faces east) [east]:" "east" SUNRISE_CAM
|
|
|
|
echo ""
|
|
echo " BASE_DIR is where your camera images live."
|
|
echo " Each camera should have a sub-folder: BASE_DIR/<camera-name>/"
|
|
local DEFAULT_BASE="$ACTUAL_HOME/sky-cam/data"
|
|
prompt_text " Image base directory [$DEFAULT_BASE]:" "$DEFAULT_BASE" BASE_DIR
|
|
[ -z "$BASE_DIR" ] && BASE_DIR="$DEFAULT_BASE"
|
|
|
|
# Prompt for Mattermost credentials
|
|
echo ""
|
|
log_info "Mattermost webhook (for automated uploads)"
|
|
echo " sky-cam posts sunrise clips and moon photos to a Mattermost channel."
|
|
echo " Create an incoming webhook in Mattermost: Settings → Integrations → Webhooks"
|
|
echo " (Leave blank to skip — add to $SKYCAM_DIR/.env later)"
|
|
echo ""
|
|
local MM_WEBHOOK="" MM_CHANNEL=""
|
|
if [ "$UNATTENDED" != true ]; then
|
|
read -p " Mattermost webhook URL [Enter to skip]: " MM_WEBHOOK
|
|
if [ -n "$MM_WEBHOOK" ]; then
|
|
prompt_text " Mattermost channel name [sky-cam]:" "sky-cam" MM_CHANNEL
|
|
fi
|
|
fi
|
|
|
|
# ── Write .env ───────────────────────────────────────────────────────────
|
|
log_info "Writing sky-cam.conf overrides to $SKYCAM_DIR/.env..."
|
|
{
|
|
echo "# sky-cam site configuration — generated by ubuntu-post-install"
|
|
echo "# Edit sky-cam.conf for full settings."
|
|
echo ""
|
|
echo "LATITUDE=${LATITUDE:-0.0000}"
|
|
echo "LONGITUDE=${LONGITUDE:-0.0000}"
|
|
echo "TIMEZONE=${TIMEZONE:-America/New_York}"
|
|
echo "BASE_DIR=${BASE_DIR}"
|
|
if [ -n "$MM_WEBHOOK" ]; then
|
|
echo "MM_WEBHOOK_URL=${MM_WEBHOOK}"
|
|
echo "MM_CHANNEL=${MM_CHANNEL:-sky-cam}"
|
|
else
|
|
echo "# MM_WEBHOOK_URL=https://mattermost.yourdomain.com/hooks/your-webhook-id"
|
|
echo "# MM_CHANNEL=sky-cam"
|
|
fi
|
|
} > "$SKYCAM_DIR/.env"
|
|
chmod 600 "$SKYCAM_DIR/.env"
|
|
|
|
# ── Patch sky-cam.conf with cameras and basic settings ───────────────────
|
|
local CONF="$SKYCAM_DIR/sky-cam.conf"
|
|
if [ -f "$CONF" ]; then
|
|
log_info "Patching sky-cam.conf with location and camera names..."
|
|
# Build CAMERAS=(...) line
|
|
local CAM_ARRAY="(${CAMERAS_LIST})"
|
|
sed -i "s|^CAMERAS=.*|CAMERAS=${CAM_ARRAY}|" "$CONF"
|
|
sed -i "s|^SUNRISE_CAM=.*|SUNRISE_CAM=${SUNRISE_CAM:-east}|" "$CONF"
|
|
log_success "sky-cam.conf updated"
|
|
else
|
|
log_warning "sky-cam.conf not found — check $SKYCAM_DIR"
|
|
fi
|
|
|
|
# ── Create image directories ─────────────────────────────────────────────
|
|
mkdir -p "$BASE_DIR"
|
|
for _cam in $CAMERAS_LIST; do
|
|
mkdir -p "$BASE_DIR/$_cam"
|
|
done
|
|
chown -R "$ACTUAL_USER:$ACTUAL_USER" "$SKYCAM_DIR" "$BASE_DIR" 2>/dev/null || true
|
|
log_success "Image directories created under $BASE_DIR"
|
|
|
|
# ── Install systemd timers ────────────────────────────────────────────────
|
|
if [ -f "$SKYCAM_DIR/install.sh" ]; then
|
|
log_info "Installing systemd user timers via install.sh..."
|
|
( cd "$SKYCAM_DIR" && sudo -u "$ACTUAL_USER" bash install.sh ) \
|
|
&& log_success "Systemd timers installed" \
|
|
|| log_warning "install.sh failed — run manually: cd $SKYCAM_DIR && ./install.sh"
|
|
else
|
|
log_warning "install.sh not found in $SKYCAM_DIR — run it manually after review"
|
|
fi
|
|
|
|
# ── Summary ───────────────────────────────────────────────────────────────
|
|
echo ""
|
|
echo "═══════════════════════════════════════════════════════"
|
|
echo " sky-cam installed"
|
|
echo "═══════════════════════════════════════════════════════"
|
|
echo ""
|
|
echo " Location: $SKYCAM_DIR"
|
|
echo " Data: $BASE_DIR"
|
|
echo " Cameras: $CAMERAS_LIST"
|
|
echo " Timezone: ${TIMEZONE:-America/New_York}"
|
|
echo ""
|
|
echo " Next steps:"
|
|
echo " 1. Review $SKYCAM_DIR/sky-cam.conf"
|
|
echo " — SCRIPT_DIR, MUSIC_DIR, schedules, encoding settings"
|
|
echo " 2. Put your Vivaldi Four Seasons audio files in:"
|
|
echo " $SKYCAM_DIR/music/"
|
|
echo " (filenames and expected MUSIC_DIR path are in sky-cam.conf)"
|
|
echo " 3. Verify systemd timers:"
|
|
echo " systemctl --user list-timers 'sky-cam-*'"
|
|
echo " 4. Credentials → $SKYCAM_DIR/.env"
|
|
echo ""
|
|
echo " To test the sunrise script manually:"
|
|
echo " cd $SKYCAM_DIR && ./daily_sunrise_video.sh"
|
|
echo ""
|
|
echo " Logs:"
|
|
echo " journalctl --user -u sky-cam-sunrise.service -f"
|
|
echo ""
|
|
}
|
|
|
|
# Run immediately when executed directly (deferred until after function definition)
|
|
[[ "${_RUN_STANDALONE:-0}" == 1 ]] && install_sky-cam
|