Claude
6c48bdc707
Caddy runs in its own container on the caddy_net bridge network, so "localhost" in a Caddyfile site block resolves to Caddy's own container — never the host, and never a sibling container. That broke every reverse proxy pointed at a network_mode: host service (confirmed live with asterisk-do's web admin): once nothing else (like a forward_auth redirect) intercepted the request first, Caddy couldn't actually reach the upstream. - services/caddy.sh: add extra_hosts so host.docker.internal resolves inside the Caddy container (Linux Docker needs this explicitly — it's automatic only on Docker Desktop). - lib/common.sh's configure_caddy_for_service: bare-port upstreams (its documented "host-network service" case) now target host.docker.internal instead of localhost. - services/asterisk-do.sh: its self-contained Caddy block (doesn't go through configure_caddy_for_service) gets the same fix for local Caddy, and now correctly targets the droplet's public IP instead of localhost for the remote-Caddy snippet case, which had the same bug. services/asterisk.sh needs no direct change — it already goes through configure_caddy_for_service, so it inherits the fix.
584 lines
25 KiB
Bash
584 lines
25 KiB
Bash
#!/bin/bash
|
|
# lib/common.sh — shared helpers for the modular post-install system.
|
|
#
|
|
# This is the single source of truth for the helper functions every service
|
|
# module relies on (logging, prompts, ownership, Caddy wiring, the service
|
|
# registry). Both the full menu (setup.sh) and single-service runs source it,
|
|
# so there is exactly ONE implementation of each helper.
|
|
#
|
|
# Modules under services/*.sh source this file (guarded), register themselves
|
|
# with register_service, and define an install_<name> function.
|
|
|
|
# Guard against double-sourcing
|
|
[ -n "${_COMMON_SH_LOADED:-}" ] && return 0
|
|
_COMMON_SH_LOADED=1
|
|
|
|
# ── Global modes (overridable by the dispatcher / environment) ───────────────
|
|
DRY_RUN="${DRY_RUN:-false}"
|
|
UNATTENDED="${UNATTENDED:-false}"
|
|
|
|
# ── Identity / paths ─────────────────────────────────────────────────────────
|
|
# The actual (non-root) user, even when run under sudo.
|
|
ACTUAL_USER="${SUDO_USER:-${USER:-$(id -un)}}"
|
|
ACTUAL_HOME="$(getent passwd "$ACTUAL_USER" 2>/dev/null | cut -d: -f6)"
|
|
[ -z "$ACTUAL_HOME" ] && ACTUAL_HOME="$HOME"
|
|
# Per-service docker folders live here: ~/docker/<service>/docker-compose.yml
|
|
DOCKER_DIR="${DOCKER_DIR:-$ACTUAL_HOME/docker}"
|
|
|
|
# ── Colored logging ──────────────────────────────────────────────────────────
|
|
RED='\033[0;31m'; GREEN='\033[0;32m'; YELLOW='\033[1;33m'; BLUE='\033[0;34m'; NC='\033[0m'
|
|
log_info() { echo -e "${BLUE}[INFO]${NC} $1"; }
|
|
log_success() { echo -e "${GREEN}[OK]${NC} $1"; }
|
|
log_warning() { echo -e "${YELLOW}[WARN]${NC} $1"; }
|
|
log_error() { echo -e "${RED}[ERROR]${NC} $1"; }
|
|
|
|
# ── Service registry ─────────────────────────────────────────────────────────
|
|
# Modules call: register_service <name> <group> <description> [port]
|
|
declare -gA SERVICE_GROUP=()
|
|
declare -gA SERVICE_DESC=()
|
|
declare -gA SERVICE_PORT=()
|
|
declare -ga SERVICE_ORDER=()
|
|
|
|
register_service() {
|
|
local name="$1" group="$2" desc="$3" port="${4:-}"
|
|
SERVICE_GROUP["$name"]="$group"
|
|
SERVICE_DESC["$name"]="$desc"
|
|
SERVICE_PORT["$name"]="$port"
|
|
SERVICE_ORDER+=("$name")
|
|
}
|
|
|
|
# ── Site-wide defaults ────────────────────────────────────────────────────────
|
|
# Stored in $DOCKER_DIR/.config (key=value, one per line).
|
|
# Service modules read these as prompt defaults so the user only types
|
|
# timezone, domain, and Caddy network once. Run: sudo ./setup.sh configure
|
|
SITE_TZ=""
|
|
SITE_DOMAIN=""
|
|
SITE_CADDY_NET="caddy_net"
|
|
SITE_PUID=""
|
|
SITE_PGID=""
|
|
CADDY_MODE="" # local | remote | none (set by site configure wizard)
|
|
CADDY_REMOTE_HOST="" # legacy — kept for backward compat with old .config files
|
|
|
|
load_site_config() {
|
|
local cfg="$DOCKER_DIR/.config"
|
|
[ -f "$cfg" ] || return 0
|
|
local key val
|
|
while IFS='=' read -r key val; do
|
|
[[ "$key" =~ ^[[:space:]]*# ]] && continue
|
|
[[ -z "${key// }" ]] && continue
|
|
# Strip leading/trailing whitespace from both sides so hand-edited files work
|
|
key="${key#"${key%%[^[:space:]]*}"}"; key="${key%"${key##*[^[:space:]]}"}"
|
|
val="${val#"${val%%[^[:space:]]*}"}"; val="${val%"${val##*[^[:space:]]}"}"
|
|
case "$key" in
|
|
SITE_TZ) SITE_TZ="$val" ;;
|
|
SITE_DOMAIN) SITE_DOMAIN="$val" ;;
|
|
SITE_CADDY_NET) SITE_CADDY_NET="$val" ;;
|
|
SITE_PUID) SITE_PUID="$val" ;;
|
|
SITE_PGID) SITE_PGID="$val" ;;
|
|
CADDY_MODE) CADDY_MODE="$val" ;;
|
|
CADDY_REMOTE_HOST) CADDY_REMOTE_HOST="$val" ;;
|
|
BASE_DOMAIN) [ -z "$SITE_DOMAIN" ] && SITE_DOMAIN="$val" ;;
|
|
esac
|
|
done < "$cfg"
|
|
# Backward compat: old installs used CADDY_REMOTE_HOST to signal remote mode
|
|
[ -z "$CADDY_MODE" ] && [ -n "$CADDY_REMOTE_HOST" ] && CADDY_MODE="remote"
|
|
export SITE_TZ SITE_DOMAIN SITE_CADDY_NET SITE_PUID SITE_PGID CADDY_MODE CADDY_REMOTE_HOST
|
|
}
|
|
|
|
save_site_config() {
|
|
local cfg="$DOCKER_DIR/.config"
|
|
mkdir -p "$(dirname "$cfg")"
|
|
{
|
|
echo "# ubuntu-post-install site defaults"
|
|
echo "# Re-run wizard: sudo ./setup.sh configure"
|
|
[ -n "$SITE_TZ" ] && echo "SITE_TZ=$SITE_TZ"
|
|
[ -n "$SITE_DOMAIN" ] && echo "SITE_DOMAIN=$SITE_DOMAIN"
|
|
[ -n "$SITE_CADDY_NET" ] && echo "SITE_CADDY_NET=$SITE_CADDY_NET"
|
|
[ -n "$SITE_PUID" ] && echo "SITE_PUID=$SITE_PUID"
|
|
[ -n "$SITE_PGID" ] && echo "SITE_PGID=$SITE_PGID"
|
|
[ -n "$CADDY_MODE" ] && echo "CADDY_MODE=$CADDY_MODE"
|
|
# Backward-compat alias for services that still read BASE_DOMAIN directly
|
|
[ -n "$SITE_DOMAIN" ] && echo "BASE_DOMAIN=$SITE_DOMAIN"
|
|
} > "$cfg"
|
|
chmod 600 "$cfg"
|
|
}
|
|
|
|
# Load immediately so all service modules inherit the values when sourced
|
|
load_site_config
|
|
|
|
# ── OS detection ─────────────────────────────────────────────────────────────
|
|
OS_DISTRO="unknown"
|
|
OS_VERSION="unknown"
|
|
OS_CODENAME="unknown"
|
|
|
|
detect_os() {
|
|
[ -f /etc/os-release ] || return 0
|
|
local key val
|
|
while IFS='=' read -r key val; do
|
|
val="${val//\"/}"
|
|
case "$key" in
|
|
ID) OS_DISTRO="$val" ;;
|
|
VERSION_ID) OS_VERSION="$val" ;;
|
|
VERSION_CODENAME|UBUNTU_CODENAME)
|
|
[ "$OS_CODENAME" = "unknown" ] && OS_CODENAME="$val" ;;
|
|
esac
|
|
done < /etc/os-release
|
|
export OS_DISTRO OS_VERSION OS_CODENAME
|
|
}
|
|
|
|
# Return 0 (true) if the detected Ubuntu version is >= the argument (e.g., "24.04").
|
|
ubuntu_version_ge() {
|
|
[ "$OS_DISTRO" = "ubuntu" ] || return 1
|
|
local a="${OS_VERSION//./}" b="${1//./}"
|
|
[ "${a:-0}" -ge "${b:-0}" ] 2>/dev/null
|
|
}
|
|
|
|
# pip install --user as actual user.
|
|
# --break-system-packages overrides PEP 668 ("externally managed environment"),
|
|
# required on Ubuntu 24.04+ — the flag name sounds alarming but with --user the
|
|
# install goes to ~/.local/ which apt never touches; nothing system-level is at risk.
|
|
# The flag was added in pip 22.3; probe once so older pip (Ubuntu 22.04) still works.
|
|
_PIP_HAS_BSP=""
|
|
_pip_probe() {
|
|
[ -n "$_PIP_HAS_BSP" ] && return
|
|
pip3 install --help 2>/dev/null | grep -q -- '--break-system-packages' \
|
|
&& _PIP_HAS_BSP=1 || _PIP_HAS_BSP=0
|
|
}
|
|
|
|
pip_user_install() {
|
|
_pip_probe
|
|
local flags="--user --quiet"
|
|
[ "$_PIP_HAS_BSP" = "1" ] && flags="$flags --break-system-packages"
|
|
sudo -u "$ACTUAL_USER" pip3 install $flags "$@"
|
|
}
|
|
|
|
detect_os
|
|
|
|
# ── Pre-flight ───────────────────────────────────────────────────────────────
|
|
require_root() {
|
|
if [ "${EUID:-$(id -u)}" -ne 0 ]; then
|
|
log_error "Please run as root (use sudo)."
|
|
exit 1
|
|
fi
|
|
}
|
|
|
|
require_docker() {
|
|
if command -v docker &>/dev/null; then
|
|
return 0
|
|
fi
|
|
|
|
log_info "Docker is not installed — installing now..."
|
|
if [ "$DRY_RUN" = true ]; then
|
|
echo "[DRY-RUN] Would install Docker CE and Docker Compose plugin from Docker's apt repo"
|
|
return 0
|
|
fi
|
|
|
|
# Docker's official apt-repo steps (docs.docker.com/engine/install/ubuntu),
|
|
# run directly rather than via the get.docker.com convenience script.
|
|
# That script wraps every step in "sudo -E sh -c ..."; on minimal/cloud
|
|
# images that never installed the sudo package (common when operating as
|
|
# root with no separate sudo user), those internal sudo calls fail while
|
|
# the outer script still exits 0 — a silent no-op install. We're already
|
|
# root here, so there's no need for sudo at all.
|
|
export DEBIAN_FRONTEND=noninteractive
|
|
|
|
local _ok=true
|
|
apt-get update -qq || _ok=false
|
|
apt-get install -y -qq ca-certificates curl >/dev/null || _ok=false
|
|
install -m 0755 -d /etc/apt/keyrings
|
|
curl -fsSL "https://download.docker.com/linux/ubuntu/gpg" -o /etc/apt/keyrings/docker.asc || _ok=false
|
|
chmod a+r /etc/apt/keyrings/docker.asc
|
|
|
|
local _arch _codename
|
|
_arch="$(dpkg --print-architecture)"
|
|
_codename="$(. /etc/os-release && echo "$VERSION_CODENAME")"
|
|
echo "deb [arch=${_arch} signed-by=/etc/apt/keyrings/docker.asc] https://download.docker.com/linux/ubuntu ${_codename} stable" \
|
|
> /etc/apt/sources.list.d/docker.list
|
|
|
|
apt-get update -qq || _ok=false
|
|
apt-get install -y -qq \
|
|
docker-ce docker-ce-cli containerd.io docker-buildx-plugin docker-compose-plugin \
|
|
|| _ok=false
|
|
systemctl enable --now docker.service || _ok=false
|
|
|
|
unset DEBIAN_FRONTEND
|
|
hash -r 2>/dev/null || true # flush command hash so the new binary is found
|
|
|
|
if [ "$_ok" != true ]; then
|
|
log_error "Docker installation failed — see apt output above for the real error."
|
|
return 1
|
|
fi
|
|
|
|
if ! command -v docker &>/dev/null && ! [ -x /usr/bin/docker ]; then
|
|
log_error "Docker binary not found after install — something went wrong."
|
|
return 1
|
|
fi
|
|
|
|
if [ -n "$ACTUAL_USER" ] && [ "$ACTUAL_USER" != "root" ]; then
|
|
usermod -aG docker "$ACTUAL_USER" \
|
|
&& log_info "Added $ACTUAL_USER to the docker group (re-login or run 'newgrp docker' to activate)"
|
|
fi
|
|
|
|
local _docker_bin
|
|
_docker_bin="$(command -v docker 2>/dev/null || echo /usr/bin/docker)"
|
|
log_success "Docker installed ($("$_docker_bin" --version 2>/dev/null))"
|
|
}
|
|
|
|
# ── SSH client config (~/.ssh/config) Host aliases ────────────────────────────
|
|
# Lets "ssh <alias>" connect directly to user@host without typing it out each
|
|
# time — handy for VPN/NetBird peers with unmemorable IPs. Operates on the
|
|
# ACTUAL_USER's config (not root's), since that's whose terminal runs ssh.
|
|
ssh_config_path() { echo "$ACTUAL_HOME/.ssh/config"; }
|
|
|
|
ssh_host_alias_exists() {
|
|
local alias="$1" cfg; cfg="$(ssh_config_path)"
|
|
[ -f "$cfg" ] && grep -qiE "^Host[[:space:]]+${alias}([[:space:]]|\$)" "$cfg"
|
|
}
|
|
|
|
add_ssh_host_alias() {
|
|
local alias="$1" hostname="$2" user="$3" port="${4:-22}"
|
|
local cfg; cfg="$(ssh_config_path)"
|
|
|
|
if [ "$DRY_RUN" = true ]; then
|
|
echo "[DRY-RUN] Would add SSH alias '$alias' -> $user@$hostname:$port to $cfg"
|
|
return 0
|
|
fi
|
|
|
|
mkdir -p "$(dirname "$cfg")"
|
|
touch "$cfg"
|
|
chmod 700 "$(dirname "$cfg")"
|
|
chmod 600 "$cfg"
|
|
|
|
if ssh_host_alias_exists "$alias"; then
|
|
log_warning "Host alias '$alias' already exists in $cfg — skipping (remove it first to replace)."
|
|
return 1
|
|
fi
|
|
|
|
{
|
|
echo ""
|
|
echo "Host $alias"
|
|
echo " HostName $hostname"
|
|
echo " User $user"
|
|
[ "$port" != "22" ] && echo " Port $port"
|
|
} >> "$cfg"
|
|
chown -R "$ACTUAL_USER:$ACTUAL_USER" "$(dirname "$cfg")" 2>/dev/null || true
|
|
log_success "Added SSH alias: ssh $alias -> $user@$hostname:$port"
|
|
}
|
|
|
|
list_ssh_host_aliases() {
|
|
local cfg; cfg="$(ssh_config_path)"
|
|
if [ ! -f "$cfg" ] || ! grep -qiE "^Host[[:space:]]+" "$cfg"; then
|
|
echo " (none — $cfg has no Host entries yet)"
|
|
return 0
|
|
fi
|
|
grep -inE "^Host[[:space:]]+" "$cfg" | sed -E 's/^([0-9]+):Host[[:space:]]+/ \1) /'
|
|
}
|
|
|
|
remove_ssh_host_alias() {
|
|
local alias="$1" cfg; cfg="$(ssh_config_path)"
|
|
if [ ! -f "$cfg" ]; then
|
|
log_warning "No SSH config file found at $cfg"
|
|
return 1
|
|
fi
|
|
if ! ssh_host_alias_exists "$alias"; then
|
|
log_warning "Host alias '$alias' not found in $cfg"
|
|
return 1
|
|
fi
|
|
if [ "$DRY_RUN" = true ]; then
|
|
echo "[DRY-RUN] Would remove SSH alias '$alias' from $cfg"
|
|
return 0
|
|
fi
|
|
local tmp; tmp="$(mktemp)"
|
|
awk -v alias="$alias" '
|
|
BEGIN { skip=0 }
|
|
tolower($1)=="host" && tolower($2)==tolower(alias) { skip=1; next }
|
|
skip==1 && /^Host[[:space:]]/ { skip=0 }
|
|
skip==1 && /^[[:space:]]*$/ { skip=0; next }
|
|
skip==1 { next }
|
|
{ print }
|
|
' "$cfg" > "$tmp"
|
|
mv "$tmp" "$cfg"
|
|
chmod 600 "$cfg"
|
|
chown "$ACTUAL_USER:$ACTUAL_USER" "$cfg" 2>/dev/null || true
|
|
log_success "Removed SSH alias: $alias"
|
|
}
|
|
|
|
# ── Command execution honoring dry-run ───────────────────────────────────────
|
|
run_cmd() {
|
|
if [ "$DRY_RUN" = true ]; then
|
|
echo "[DRY-RUN] Would execute: $*"
|
|
return 0
|
|
else
|
|
"$@"
|
|
fi
|
|
}
|
|
|
|
# Ensure Docker directories are owned by the actual user (not root)
|
|
ensure_docker_dir_ownership() {
|
|
if [ "$DRY_RUN" = true ]; then
|
|
echo "[DRY-RUN] Would set ownership of $* to $ACTUAL_USER:$ACTUAL_USER"
|
|
return 0
|
|
fi
|
|
for dir in "$@"; do
|
|
[ -d "$dir" ] && chown -R "$ACTUAL_USER:$ACTUAL_USER" "$dir" 2>/dev/null || true
|
|
done
|
|
}
|
|
|
|
# Generate a secure alphanumeric password (no special characters)
|
|
generate_password() {
|
|
local length="${1:-32}"
|
|
openssl rand -base64 48 | tr -dc 'a-zA-Z0-9' | head -c "$length"
|
|
}
|
|
|
|
# Validate password (alphanumeric only, minimum length). Returns 0/1.
|
|
validate_password() {
|
|
local password="$1" min_length="${2:-12}"
|
|
if [ ${#password} -lt "$min_length" ]; then
|
|
echo " ⚠ Password must be at least $min_length characters long"; return 1
|
|
fi
|
|
if echo "$password" | grep -q '[^a-zA-Z0-9]'; then
|
|
echo " ⚠ Password must contain only letters and numbers (no special characters)"; return 1
|
|
fi
|
|
return 0
|
|
}
|
|
|
|
# Prompt yes/no, honoring unattended. prompt_yn "Question?" "default" VARNAME
|
|
prompt_yn() {
|
|
local question="$1" default="$2" varname="$3" response
|
|
if [ "$UNATTENDED" = true ]; then
|
|
eval "$varname='$default'"; echo "$question [auto: $default]"; return
|
|
fi
|
|
read -p "$question " response
|
|
eval "$varname='$response'"
|
|
}
|
|
|
|
# Prompt text, honoring unattended. prompt_text "Question?" "default" VARNAME
|
|
prompt_text() {
|
|
local question="$1" default="$2" varname="$3" response
|
|
if [ "$UNATTENDED" = true ]; then
|
|
eval "$varname='$default'"; echo "$question [auto: $default]"; return
|
|
fi
|
|
read -p "$question " response
|
|
eval "$varname='${response:-$default}'"
|
|
}
|
|
|
|
# Prompt for how to handle a service that's already installed, honoring
|
|
# unattended. prompt_reinstall_mode VARNAME
|
|
# Sets VARNAME to one of: update | fresh | cancel
|
|
# Enter (no input) and any unrecognized input both resolve to "cancel" — this
|
|
# guards a destructive full reinstall behind a deliberate keypress instead of
|
|
# a stray Enter. Unattended mode always resolves to "cancel" too: never
|
|
# silently touch an existing install when nobody's watching the prompt.
|
|
prompt_reinstall_mode() {
|
|
local varname="$1" response
|
|
if [ "$UNATTENDED" = true ]; then
|
|
eval "$varname='cancel'"
|
|
echo "Existing install detected — leaving it as-is [auto: cancel, unattended mode]"
|
|
return
|
|
fi
|
|
echo " Existing install detected. Choose:"
|
|
echo " r) Reinstall in place — refresh vendor files/config, keep existing settings"
|
|
echo " f) Full install — re-run every prompt from scratch"
|
|
echo " c) Cancel — leave everything as-is [default]"
|
|
read -p " Choice [r/f/c, Enter=cancel]: " response
|
|
case "${response,,}" in
|
|
r) eval "$varname='update'" ;;
|
|
f) eval "$varname='fresh'" ;;
|
|
*) eval "$varname='cancel'" ;;
|
|
esac
|
|
}
|
|
|
|
# ── Per-service README generation ────────────────────────────────────────────
|
|
# Write <dir>/README.md from stdin (markdown). Every module is encouraged to
|
|
# call this so each ~/docker/<service>/ folder is self-documenting.
|
|
# Usage:
|
|
# write_readme "$DIR" <<MD
|
|
# # Title
|
|
# ...
|
|
# MD
|
|
write_readme() {
|
|
local dir="$1"
|
|
if [ "$DRY_RUN" = true ]; then
|
|
cat >/dev/null # consume the heredoc so the caller isn't blocked
|
|
echo "[DRY-RUN] Would write $dir/README.md"
|
|
return 0
|
|
fi
|
|
mkdir -p "$dir"
|
|
cat > "$dir/README.md"
|
|
chown "$ACTUAL_USER:$ACTUAL_USER" "$dir/README.md" 2>/dev/null || true
|
|
}
|
|
|
|
# ── Caddy reverse-proxy wiring (shared by every web service) ─────────────────
|
|
# Usage: configure_caddy_for_service "Name" "UPSTREAM" "default-subdomain" ["extra"]
|
|
# UPSTREAM: container:port for caddy_net routing (e.g. "filebrowser:80"),
|
|
# or plain port number for localhost fallback (e.g. "8085").
|
|
configure_caddy_for_service() {
|
|
local SERVICE_NAME="$1" SERVICE_UPSTREAM="$2" DEFAULT_SUBDOMAIN="$3" EXTRA_CONFIG="${4:-}"
|
|
|
|
# Derive the proxy upstream and a port number for display messages.
|
|
# Plain number → host.docker.internal:PORT (host-network or legacy
|
|
# services — Caddy itself runs in its own container on
|
|
# caddy_net, a bridge network, so "localhost" here would
|
|
# resolve to Caddy's own container, not the host. Requires
|
|
# the extra_hosts entry set in services/caddy.sh's compose
|
|
# file — see the comment there.)
|
|
# name:port → used as-is (preferred: service on shared caddy_net)
|
|
local _UPSTREAM _DISPLAY_PORT
|
|
case "$SERVICE_UPSTREAM" in
|
|
*:*) _UPSTREAM="$SERVICE_UPSTREAM"; _DISPLAY_PORT="${SERVICE_UPSTREAM##*:}" ;;
|
|
*) _UPSTREAM="host.docker.internal:$SERVICE_UPSTREAM"; _DISPLAY_PORT="$SERVICE_UPSTREAM" ;;
|
|
esac
|
|
|
|
# ── Determine Caddy mode ──────────────────────────────────────────────────
|
|
# Explicit CADDY_MODE (set by site wizard) takes priority.
|
|
# Fall back to: local if ~/docker/caddy exists, remote if legacy CADDY_REMOTE_HOST set.
|
|
local _CADDY_MODE="${CADDY_MODE:-none}"
|
|
[ "$_CADDY_MODE" = "none" ] && [ -d "$DOCKER_DIR/caddy" ] && _CADDY_MODE="local"
|
|
[ "$_CADDY_MODE" = "none" ] && [ -n "${CADDY_REMOTE_HOST:-}" ] && _CADDY_MODE="remote"
|
|
[ "$_CADDY_MODE" = "none" ] && return 0
|
|
|
|
echo ""
|
|
echo "━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━"
|
|
echo " CADDY REVERSE PROXY CONFIGURATION"
|
|
echo "━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━"
|
|
echo ""
|
|
if [ "$_CADDY_MODE" = "remote" ]; then
|
|
echo " Caddy is on a remote machine — a snippet file will be saved to"
|
|
echo " ~/docker/caddy-snippets/ for you to copy to your Caddy machine."
|
|
else
|
|
echo " Caddy is installed on this machine."
|
|
fi
|
|
echo ""
|
|
|
|
local CONFIGURE_CADDY=""
|
|
prompt_yn "Configure Caddy reverse proxy for $SERVICE_NAME? (y/n):" "n" CONFIGURE_CADDY
|
|
if [ "$CONFIGURE_CADDY" != "y" ] && [ "$CONFIGURE_CADDY" != "Y" ]; then
|
|
echo " Skipping Caddy configuration."
|
|
echo " Access $SERVICE_NAME at: http://localhost:$_DISPLAY_PORT"
|
|
return 0
|
|
fi
|
|
|
|
# Domain prompt — pre-fill from SITE_DOMAIN when available
|
|
echo ""
|
|
local _default_domain=""
|
|
if [ -n "$SITE_DOMAIN" ]; then
|
|
_default_domain="${DEFAULT_SUBDOMAIN}.${SITE_DOMAIN}"
|
|
echo " Default: $_default_domain"
|
|
else
|
|
echo " No base domain set — run: sudo ./setup.sh configure"
|
|
echo " Examples: ${DEFAULT_SUBDOMAIN}.example.com, ${DEFAULT_SUBDOMAIN}.yourdomain.com"
|
|
fi
|
|
echo ""
|
|
local SERVICE_DOMAIN=""
|
|
prompt_text "Domain [${_default_domain:-required}]:" "$_default_domain" SERVICE_DOMAIN
|
|
if [ -z "$SERVICE_DOMAIN" ]; then
|
|
echo " ⚠ No domain provided, skipping Caddy configuration."; return 0
|
|
fi
|
|
|
|
# Build the site block — upstream differs by mode
|
|
local _BLOCK_UPSTREAM="$_UPSTREAM"
|
|
if [ "$_CADDY_MODE" = "remote" ]; then
|
|
# Remote Caddy can't resolve Docker container names — use this machine's IP + published port.
|
|
# Prefer legacy CADDY_REMOTE_HOST if set (old installs that stored it explicitly),
|
|
# otherwise auto-detect the primary non-loopback IP.
|
|
local _THIS_IP="${CADDY_REMOTE_HOST:-}"
|
|
if [ -z "$_THIS_IP" ]; then
|
|
_THIS_IP="$(hostname -I 2>/dev/null | awk '{print $1}')"
|
|
fi
|
|
[ -z "$_THIS_IP" ] && _THIS_IP="$(hostname -f 2>/dev/null || echo "127.0.0.1")"
|
|
_BLOCK_UPSTREAM="${_THIS_IP}:${_DISPLAY_PORT}"
|
|
fi
|
|
|
|
local _SITE_BLOCK
|
|
_SITE_BLOCK="$(cat << CADDY_BLOCK
|
|
|
|
# $SERVICE_NAME
|
|
${SERVICE_DOMAIN} {
|
|
reverse_proxy ${_BLOCK_UPSTREAM}
|
|
|
|
# Security headers
|
|
header {
|
|
Strict-Transport-Security "max-age=31536000; includeSubDomains; preload"
|
|
X-Content-Type-Options "nosniff"
|
|
X-Frame-Options "SAMEORIGIN"
|
|
Referrer-Policy "strict-origin-when-cross-origin"
|
|
}
|
|
|
|
# Logging for CrowdSec (Caddy JSON access logs)
|
|
log {
|
|
output file /var/log/caddy/${SERVICE_DOMAIN}.log
|
|
format json
|
|
}
|
|
${EXTRA_CONFIG}
|
|
}
|
|
CADDY_BLOCK
|
|
)"
|
|
|
|
# ── Local Caddy: write to Caddyfile and reload ────────────────────────────
|
|
if [ "$_CADDY_MODE" = "local" ]; then
|
|
local CADDY_DIR="$DOCKER_DIR/caddy"
|
|
local CADDYFILE="$CADDY_DIR/Caddyfile"
|
|
local BACKUP_FILE="$CADDY_DIR/Caddyfile.backup.$(date +%Y%m%d-%H%M%S)"
|
|
|
|
if [ -f "$CADDYFILE" ]; then
|
|
echo " Backing up Caddyfile to: $(basename "$BACKUP_FILE")"
|
|
cp "$CADDYFILE" "$BACKUP_FILE"
|
|
else
|
|
echo " Creating new Caddyfile"; touch "$CADDYFILE"
|
|
fi
|
|
|
|
if grep -q "^${SERVICE_DOMAIN}" "$CADDYFILE" 2>/dev/null; then
|
|
echo " ⚠ $SERVICE_DOMAIN already exists in Caddyfile"
|
|
local OVERWRITE=""
|
|
prompt_yn "Overwrite existing configuration? (y/n):" "n" OVERWRITE
|
|
if [ "$OVERWRITE" != "y" ] && [ "$OVERWRITE" != "Y" ]; then
|
|
echo " Keeping existing configuration."; return 0
|
|
fi
|
|
sed -i "/^${SERVICE_DOMAIN}/,/^}/d" "$CADDYFILE"
|
|
fi
|
|
|
|
echo " Adding $SERVICE_NAME configuration to Caddyfile..."
|
|
printf '%s\n' "$_SITE_BLOCK" >> "$CADDYFILE"
|
|
|
|
echo " ✓ Configuration added to Caddyfile"
|
|
echo " Reloading Caddy configuration..."
|
|
docker exec caddy caddy fmt --overwrite /etc/caddy/Caddyfile 2>/dev/null || true
|
|
# The template Caddyfile ships with "admin off" (security hardening —
|
|
# no local API attack surface), so `caddy reload` never works here;
|
|
# it depends on that same admin endpoint. Try it anyway in case a
|
|
# box has admin enabled, but fall back to a full container restart
|
|
# (brief availability gap for everything Caddy fronts, but reliable
|
|
# regardless of the admin setting) rather than leaving the change
|
|
# sitting unapplied on disk.
|
|
if docker exec caddy caddy reload --config /etc/caddy/Caddyfile 2>/dev/null; then
|
|
echo " ✓ $SERVICE_NAME is now accessible at: https://$SERVICE_DOMAIN"
|
|
elif docker restart caddy &>/dev/null; then
|
|
echo " ✓ Caddy restarted to apply changes (reload API is disabled by default)"
|
|
echo " ✓ $SERVICE_NAME should be accessible at: https://$SERVICE_DOMAIN"
|
|
else
|
|
echo " ⚠ Failed to reload or restart Caddy. Check: docker logs caddy"
|
|
echo " You can restore from backup: $BACKUP_FILE"
|
|
fi
|
|
|
|
# ── Remote Caddy: write snippet file ─────────────────────────────────────
|
|
else
|
|
local SNIPPET_DIR="$DOCKER_DIR/caddy-snippets"
|
|
local SNIPPET_FILE="$SNIPPET_DIR/${DEFAULT_SUBDOMAIN}.caddy"
|
|
mkdir -p "$SNIPPET_DIR"
|
|
printf '%s\n' "$_SITE_BLOCK" > "$SNIPPET_FILE"
|
|
chown "$ACTUAL_USER:$ACTUAL_USER" "$SNIPPET_FILE" 2>/dev/null || true
|
|
|
|
echo " ✓ Snippet saved: $SNIPPET_FILE"
|
|
echo ""
|
|
echo " Copy to your Caddy machine and append to its Caddyfile:"
|
|
echo " scp $SNIPPET_FILE caddy-host:~/caddy-snippets/"
|
|
echo " # then on the Caddy machine:"
|
|
echo " cat ~/caddy-snippets/${DEFAULT_SUBDOMAIN}.caddy >> /path/to/Caddyfile"
|
|
echo " docker restart caddy # reload API is disabled by default; a restart is what applies it"
|
|
echo ""
|
|
echo " Or rsync all snippets at once:"
|
|
echo " rsync -av $SNIPPET_DIR/ caddy-host:~/caddy-snippets/"
|
|
fi
|
|
echo ""
|
|
}
|