Claude
516e0db66f
Mirrors the fixes just made in asterisk-digital-ocean.sh: - Reordered so the Caddy reverse-proxy decision happens before the UFW rules are built, using the new CADDY_SERVICE_CONFIGURED/ CADDY_SERVICE_MODE signal from configure_caddy_for_service() to skip opening the web admin port on the LAN when a local Caddy is already fronting it (still opens it for a remote Caddy machine, which needs LAN access to reach this host directly). - Calls the new ensure_ufw_enabled() so UFW actually enforces the rules this script adds, instead of leaving them queued but inert. Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_015X1jRGHwrvovz2qkhKfDZi
669 lines
30 KiB
Bash
669 lines
30 KiB
Bash
#!/bin/bash
|
||
# services/asterisk.sh — Easy Asterisk PBX + coturn TURN server (home intercom/VoIP).
|
||
# Part of the modular post-install system (sourced by setup.sh).
|
||
#
|
||
# Can also be run standalone on any machine:
|
||
# sudo bash asterisk.sh
|
||
# (Docker must already be installed when run standalone)
|
||
|
||
# ── Standalone bootstrap ──────────────────────────────────────────────────────
|
||
# Detected when the script is executed directly rather than sourced by setup.sh.
|
||
# Sets up helpers and globals, then defers execution until after the function
|
||
# definition at the bottom of this file.
|
||
if [[ "${BASH_SOURCE[0]}" == "${0}" ]]; then
|
||
[[ "$(id -u)" == "0" ]] || { echo "Run with sudo: sudo bash $0"; exit 1; }
|
||
|
||
_SELF_DIR="$(cd "$(dirname "${BASH_SOURCE[0]}")" && pwd)"
|
||
_COMMON="$_SELF_DIR/../lib/common.sh"
|
||
|
||
if [[ -f "$_COMMON" ]]; then
|
||
# Full repo present — use the real helpers (picks up ~/docker/.config too)
|
||
# shellcheck source=../lib/common.sh
|
||
source "$_COMMON"
|
||
else
|
||
# One-off copy — inline minimal stubs so the script works without the repo
|
||
log_info() { echo -e "\033[0;34m[INFO]\033[0m $*"; }
|
||
log_success() { echo -e "\033[0;32m[OK]\033[0m $*"; }
|
||
log_warning() { echo -e "\033[1;33m[WARN]\033[0m $*"; }
|
||
log_error() { echo -e "\033[0;31m[ERROR]\033[0m $*" >&2; }
|
||
|
||
require_docker() {
|
||
command -v docker &>/dev/null || {
|
||
log_error "Docker not found. Install it first:"
|
||
log_error " curl -fsSL https://get.docker.com | sudo sh"
|
||
return 1
|
||
}
|
||
docker compose version &>/dev/null || {
|
||
log_error "Docker Compose plugin missing:"
|
||
log_error " sudo apt-get install -y docker-compose-plugin"
|
||
return 1
|
||
}
|
||
}
|
||
|
||
ensure_docker_dir_ownership() {
|
||
chown -R "$ACTUAL_USER:$ACTUAL_USER" "$@" 2>/dev/null || true
|
||
}
|
||
|
||
# Match common.sh's eval-based pattern so local vars in install_* are set correctly
|
||
prompt_text() {
|
||
local _q="$1" _def="$2" _var="$3" _r
|
||
[[ "${UNATTENDED:-false}" == "true" ]] && { eval "$_var='$_def'"; return; }
|
||
read -r -p " $_q " _r
|
||
eval "$_var='${_r:-$_def}'"
|
||
}
|
||
|
||
prompt_yn() {
|
||
local _q="$1" _def="$2" _var="$3" _r
|
||
[[ "${UNATTENDED:-false}" == "true" ]] && { eval "$_var='$_def'"; return; }
|
||
read -r -p " $_q " _r
|
||
eval "$_var='${_r:-$_def}'"
|
||
}
|
||
|
||
prompt_reinstall_mode() {
|
||
local _var="$1" _r
|
||
if [[ "${UNATTENDED:-false}" == "true" ]]; then
|
||
eval "$_var='cancel'"
|
||
echo "Existing install detected — leaving it as-is [auto: cancel, unattended mode]"
|
||
return
|
||
fi
|
||
echo " Existing install detected. Choose:"
|
||
echo " r) Reinstall in place — refresh vendor files/config, keep existing settings"
|
||
echo " f) Full install — re-run every prompt from scratch"
|
||
echo " c) Cancel — leave everything as-is [default]"
|
||
read -r -p " Choice [r/f/c, Enter=cancel]: " _r
|
||
case "${_r,,}" in
|
||
r) eval "$_var='update'" ;;
|
||
f) eval "$_var='fresh'" ;;
|
||
*) eval "$_var='cancel'" ;;
|
||
esac
|
||
}
|
||
|
||
configure_caddy_for_service() {
|
||
local _name="$1" _upstream="$2" _subdomain="$3" _extra="${4:-}"
|
||
local _caddy_dir="$DOCKER_DIR/caddy"
|
||
local _caddyfile="$_caddy_dir/Caddyfile"
|
||
local _display_port="${_upstream##*:}"
|
||
|
||
local _mode="none"
|
||
[[ -d "$_caddy_dir" ]] && _mode="local"
|
||
[[ -n "${CADDY_REMOTE_HOST:-}" ]] && [[ "$_mode" != "local" ]] && _mode="remote"
|
||
[[ "$_mode" == "none" ]] && {
|
||
log_info "Access $_name directly on port $_display_port."
|
||
return 0
|
||
}
|
||
|
||
echo ""
|
||
local _do_caddy=""
|
||
if [[ "$_mode" == "remote" ]]; then
|
||
log_info "Remote Caddy configured (${CADDY_REMOTE_HOST})."
|
||
log_info "A snippet file will be saved to ~/docker/caddy-snippets/."
|
||
fi
|
||
read -r -p " Configure Caddy reverse proxy for $_name? [y/N]: " _do_caddy
|
||
[[ "${_do_caddy,,}" == "y" ]] || {
|
||
log_info "Skipping — access at: http://localhost:$_display_port"
|
||
return 0
|
||
}
|
||
|
||
local _default_domain=""
|
||
if [[ -n "${SITE_DOMAIN:-}" ]] && [[ "$SITE_DOMAIN" != "example.com" ]]; then
|
||
_default_domain="${_subdomain}.${SITE_DOMAIN}"
|
||
log_info "Default: $_default_domain"
|
||
fi
|
||
local _domain=""
|
||
read -r -p " Domain [${_default_domain:-required}]: " _domain
|
||
_domain="${_domain:-$_default_domain}"
|
||
[[ -n "$_domain" ]] || { log_warning "No domain entered — skipping Caddy."; return 0; }
|
||
|
||
local _block_upstream="$_upstream"
|
||
if [[ "$_mode" == "remote" ]]; then
|
||
_block_upstream="${CADDY_REMOTE_HOST}:${_display_port}"
|
||
fi
|
||
|
||
local _site_block
|
||
_site_block="$(cat << CBLOCK
|
||
|
||
# $_name
|
||
${_domain} {
|
||
reverse_proxy ${_block_upstream}
|
||
|
||
header {
|
||
Strict-Transport-Security "max-age=31536000; includeSubDomains; preload"
|
||
X-Content-Type-Options "nosniff"
|
||
X-Frame-Options "SAMEORIGIN"
|
||
Referrer-Policy "strict-origin-when-cross-origin"
|
||
}
|
||
|
||
log {
|
||
output file /var/log/caddy/${_domain}.log
|
||
format json
|
||
}
|
||
${_extra}
|
||
}
|
||
CBLOCK
|
||
)"
|
||
|
||
if [[ "$_mode" == "local" ]]; then
|
||
if [[ -f "$_caddyfile" ]]; then
|
||
local _bk="$_caddy_dir/Caddyfile.backup.$(date +%Y%m%d-%H%M%S)"
|
||
cp "$_caddyfile" "$_bk"
|
||
log_info "Backed up Caddyfile to $(basename "$_bk")"
|
||
else
|
||
touch "$_caddyfile"
|
||
fi
|
||
|
||
if grep -q "^${_domain}" "$_caddyfile" 2>/dev/null; then
|
||
log_warning "$_domain already in Caddyfile"
|
||
local _ow=""
|
||
read -r -p " Overwrite? [y/N]: " _ow
|
||
[[ "${_ow,,}" == "y" ]] || { log_info "Keeping existing entry."; return 0; }
|
||
sed -i "/^${_domain}/,/^}/d" "$_caddyfile"
|
||
fi
|
||
|
||
printf '%s\n' "$_site_block" >> "$_caddyfile"
|
||
log_success "Added $_domain to Caddyfile"
|
||
docker exec caddy caddy fmt --overwrite /etc/caddy/Caddyfile 2>/dev/null || true
|
||
# The template Caddyfile ships with "admin off", so `caddy
|
||
# reload` (which needs that same admin API) never actually
|
||
# works here. Try it anyway, fall back to a restart.
|
||
if docker exec caddy caddy reload --config /etc/caddy/Caddyfile 2>/dev/null; then
|
||
log_success "$_name accessible at: https://$_domain"
|
||
elif docker restart caddy &>/dev/null; then
|
||
log_success "Caddy restarted to apply changes (reload API is disabled by default)"
|
||
log_success "$_name should be accessible at: https://$_domain"
|
||
else
|
||
log_warning "Reload/restart failed — check: docker logs caddy"
|
||
log_info "Manual fix: docker restart caddy"
|
||
fi
|
||
else
|
||
local _snippet_dir="$DOCKER_DIR/caddy-snippets"
|
||
local _snippet_file="$_snippet_dir/${_subdomain}.caddy"
|
||
mkdir -p "$_snippet_dir"
|
||
printf '%s\n' "$_site_block" > "$_snippet_file"
|
||
chown "$ACTUAL_USER:$ACTUAL_USER" "$_snippet_file" 2>/dev/null || true
|
||
log_success "Snippet saved: $_snippet_file"
|
||
log_info "Copy to Caddy machine:"
|
||
log_info " scp $_snippet_file caddy-host:~/caddy-snippets/"
|
||
log_info " rsync -av $_snippet_dir/ caddy-host:~/caddy-snippets/ (all at once)"
|
||
fi
|
||
}
|
||
|
||
write_readme() {
|
||
local _dir="$1"
|
||
mkdir -p "$_dir"
|
||
[[ "${DRY_RUN:-false}" == "true" ]] && return 0
|
||
cat > "$_dir/README.md"
|
||
}
|
||
|
||
generate_password() {
|
||
local _len="${1:-32}"
|
||
tr -dc 'A-Za-z0-9' < /dev/urandom | head -c "$_len"
|
||
echo
|
||
}
|
||
fi
|
||
|
||
# Globals — ACTUAL_USER/ACTUAL_HOME must come before DOCKER_DIR
|
||
# ($HOME under sudo is /root, not the real user's home)
|
||
ACTUAL_USER="${ACTUAL_USER:-${SUDO_USER:-$USER}}"
|
||
ACTUAL_HOME="$(getent passwd "$ACTUAL_USER" 2>/dev/null | cut -d: -f6 || echo "${HOME:-/root}")"
|
||
DOCKER_DIR="${DOCKER_DIR:-$ACTUAL_HOME/docker}"
|
||
DRY_RUN="${DRY_RUN:-false}"
|
||
UNATTENDED="${UNATTENDED:-false}"
|
||
SITE_TZ="${SITE_TZ:-$(cat /etc/timezone 2>/dev/null || echo UTC)}"
|
||
SITE_DOMAIN="${SITE_DOMAIN:-example.com}"
|
||
SITE_CADDY_NET="${SITE_CADDY_NET:-caddy_net}"
|
||
CADDY_REMOTE_HOST="${CADDY_REMOTE_HOST:-}"
|
||
|
||
register_service() { :; } # no-op — no wizard to register into
|
||
_RUN_STANDALONE=1
|
||
fi
|
||
# ─────────────────────────────────────────────────────────────────────────────
|
||
|
||
register_service asterisk homelab "Easy Asterisk PBX + coturn TURN server (home intercom/VoIP)" 5061
|
||
|
||
# ── Shared: vendor file refresh ────────────────────────────────────────────
|
||
# Called from both a fresh install and an "update in place" run, so a single
|
||
# copy of this logic stays current for both instead of drifting apart. Must
|
||
# be called with $PWD already at $EA_DIR.
|
||
_asterisk_refresh_vendor_files() {
|
||
mkdir -p docker scripts
|
||
|
||
local _SELF_DIR_LOCAL
|
||
_SELF_DIR_LOCAL="$(cd "$(dirname "${BASH_SOURCE[0]}")" && pwd)"
|
||
local VENDOR_DIR="$_SELF_DIR_LOCAL/../vendor/easy-asterisk"
|
||
|
||
if [[ -d "$VENDOR_DIR" ]]; then
|
||
log_info "Copying vendor files from $VENDOR_DIR ..."
|
||
cp "$VENDOR_DIR/Dockerfile" ./Dockerfile
|
||
cp "$VENDOR_DIR/docker/entrypoint.sh" ./docker/entrypoint.sh
|
||
cp "$VENDOR_DIR/docker/coturn-entrypoint.sh" ./docker/coturn-entrypoint.sh
|
||
cp "$VENDOR_DIR/easy-asterisk-v0.10.0.sh" ./easy-asterisk.sh
|
||
cp "$VENDOR_DIR/easy-asterisk-v0.10.0.sh" ./easy-asterisk-v0.10.0.sh
|
||
cp "$VENDOR_DIR/scripts/vpn-diagnostics.sh" ./scripts/vpn-diagnostics.sh
|
||
cp "$VENDOR_DIR/scripts/dns-whitelist.sh" ./scripts/dns-whitelist.sh
|
||
else
|
||
log_info "Vendor directory not found — downloading from GitHub ..."
|
||
local GH_RAW="https://raw.githubusercontent.com/DeadDork/easy-asterisk/main"
|
||
curl -fsSL "$GH_RAW/Dockerfile" -o ./Dockerfile
|
||
curl -fsSL "$GH_RAW/docker/entrypoint.sh" -o ./docker/entrypoint.sh
|
||
curl -fsSL "$GH_RAW/docker/coturn-entrypoint.sh" -o ./docker/coturn-entrypoint.sh
|
||
curl -fsSL "$GH_RAW/easy-asterisk-v0.10.0.sh" -o ./easy-asterisk.sh
|
||
curl -fsSL "$GH_RAW/scripts/vpn-diagnostics.sh" -o ./scripts/vpn-diagnostics.sh
|
||
curl -fsSL "$GH_RAW/scripts/dns-whitelist.sh" -o ./scripts/dns-whitelist.sh
|
||
cp ./easy-asterisk.sh ./easy-asterisk-v0.10.0.sh
|
||
fi
|
||
|
||
chmod 755 ./easy-asterisk.sh ./easy-asterisk-v0.10.0.sh \
|
||
./docker/entrypoint.sh ./docker/coturn-entrypoint.sh \
|
||
./scripts/vpn-diagnostics.sh ./scripts/dns-whitelist.sh
|
||
}
|
||
|
||
# ── Shared: docker-compose.yml ─────────────────────────────────────────────
|
||
# Same reasoning as above — one copy of the template used by both fresh
|
||
# installs and updates. Must be called with $PWD already at $EA_DIR.
|
||
# HAS_VLANS_VAL/VLAN_SUBNETS_VAL aren't referenced here — they live only in
|
||
# .env, which the entrypoint reads at container start.
|
||
_asterisk_write_compose() {
|
||
cat > docker-compose.yml << 'EOF'
|
||
name: asterisk
|
||
|
||
services:
|
||
asterisk:
|
||
build: .
|
||
container_name: easy-asterisk
|
||
network_mode: host
|
||
depends_on:
|
||
coturn:
|
||
condition: service_started
|
||
volumes:
|
||
- ./config/asterisk:/etc/asterisk
|
||
- ./config/easy-asterisk:/etc/easy-asterisk
|
||
- ./logs:/var/log/asterisk
|
||
- ./spool:/var/spool/asterisk
|
||
- ./lib:/var/lib/asterisk
|
||
- ./easy-asterisk.sh:/usr/local/bin/easy-asterisk:ro
|
||
- ./exports:/root
|
||
CADDY_VOLUME_PLACEHOLDER
|
||
env_file: .env
|
||
restart: unless-stopped
|
||
healthcheck:
|
||
test: ["CMD", "asterisk", "-rx", "core show version"]
|
||
interval: 30s
|
||
timeout: 5s
|
||
retries: 3
|
||
|
||
coturn:
|
||
image: coturn/coturn:latest
|
||
container_name: easy-asterisk-coturn
|
||
network_mode: host
|
||
user: root
|
||
entrypoint: ["/coturn-entrypoint.sh"]
|
||
volumes:
|
||
- ./docker/coturn-entrypoint.sh:/coturn-entrypoint.sh:ro
|
||
env_file: .env
|
||
command:
|
||
- -n
|
||
- --listening-port=${TURN_PORT:-3478}
|
||
- --listening-ip=0.0.0.0
|
||
- --fingerprint
|
||
- --lt-cred-mech
|
||
- --user=${TURN_USERNAME:-easyasterisk}:${TURN_PASSWORD}
|
||
- --realm=${DOMAIN_NAME:-localhost}
|
||
- --min-port=49152
|
||
- --max-port=49252
|
||
- --no-tls
|
||
- --no-dtls
|
||
- --no-cli
|
||
- --no-multicast-peers
|
||
- --log-file=stdout
|
||
restart: unless-stopped
|
||
|
||
EOF
|
||
|
||
# Share Caddy's cert store (read-only) so the entrypoint can auto-sync a
|
||
# real Let's Encrypt cert for DOMAIN_NAME instead of falling back to
|
||
# self-signed. No-op if Caddy isn't installed on this box.
|
||
if [[ -d "$DOCKER_DIR/caddy/data" ]]; then
|
||
sed -i "s#CADDY_VOLUME_PLACEHOLDER# - ${DOCKER_DIR}/caddy/data:/caddy-data:ro#" docker-compose.yml
|
||
else
|
||
sed -i "/CADDY_VOLUME_PLACEHOLDER/d" docker-compose.yml
|
||
fi
|
||
}
|
||
|
||
install_asterisk() {
|
||
require_docker || return 1
|
||
log_info "Installing Easy Asterisk PBX + coturn..."
|
||
|
||
local EA_DIR="$DOCKER_DIR/asterisk"
|
||
|
||
if [ "$DRY_RUN" = true ]; then
|
||
echo "[DRY-RUN] Would create $EA_DIR with Dockerfile, docker-compose.yml, .env"
|
||
echo "[DRY-RUN] Would copy/download vendor files from easy-asterisk"
|
||
echo "[DRY-RUN] Would scan for a free web admin port starting at 8081 (avoids e.g. CrowdSec's 8080)"
|
||
echo "[DRY-RUN] Would open UFW ports: 5060, 5061, <web admin port>, 8088, 8089, 3478, 10000-20000, 49152-49252"
|
||
echo "[DRY-RUN] Would offer 'update in place' instead of a fresh install if $EA_DIR already exists"
|
||
return 0
|
||
fi
|
||
|
||
# ── Existing install? Offer update-in-place instead of a full reinstall ───
|
||
# A fresh install re-runs every prompt (networking mode, domain, VLANs,
|
||
# Authelia). An update only refreshes vendor files + docker-compose.yml —
|
||
# picking up fixes like this one — and rebuilds, without touching .env,
|
||
# UFW, or the Caddy/Authelia config already in place.
|
||
if [[ -f "$EA_DIR/docker-compose.yml" && -f "$EA_DIR/.env" ]]; then
|
||
echo ""
|
||
log_info "Existing install found at $EA_DIR."
|
||
local REINSTALL_MODE=""
|
||
prompt_reinstall_mode REINSTALL_MODE
|
||
case "$REINSTALL_MODE" in
|
||
update)
|
||
mkdir -p "$EA_DIR/config/asterisk" "$EA_DIR/config/easy-asterisk" \
|
||
"$EA_DIR/logs" "$EA_DIR/spool" "$EA_DIR/lib" "$EA_DIR/exports"
|
||
ensure_docker_dir_ownership "$EA_DIR"
|
||
cd "$EA_DIR" || return 1
|
||
|
||
_asterisk_refresh_vendor_files
|
||
_asterisk_write_compose
|
||
|
||
log_info "Rebuilding and restarting containers..."
|
||
if docker compose up -d --build --force-recreate; then
|
||
log_success "Update complete — vendor files and docker-compose.yml refreshed."
|
||
else
|
||
log_warning "docker compose up failed — check: docker compose -f $EA_DIR/docker-compose.yml logs"
|
||
fi
|
||
|
||
local _EXISTING_DOMAIN _EXISTING_PORT
|
||
_EXISTING_DOMAIN="$(grep -E '^DOMAIN_NAME=' .env | cut -d= -f2-)"
|
||
_EXISTING_PORT="$(grep -E '^WEB_ADMIN_PORT=' .env | cut -d= -f2-)"
|
||
echo ""
|
||
log_success "Existing .env, UFW rules, and Caddy/Authelia config were left untouched."
|
||
if [[ -n "$_EXISTING_DOMAIN" ]]; then
|
||
echo " Web admin: https://${_EXISTING_DOMAIN}/"
|
||
else
|
||
echo " Web admin: http://$(hostname -I 2>/dev/null | awk '{print $1}' || echo localhost):${_EXISTING_PORT:-8081}"
|
||
fi
|
||
echo " Logs: docker compose -f $EA_DIR/docker-compose.yml logs -f"
|
||
echo ""
|
||
return 0
|
||
;;
|
||
cancel)
|
||
log_info "Leaving the existing install as-is — nothing changed."
|
||
return 0
|
||
;;
|
||
fresh)
|
||
log_info "Proceeding with a full fresh reinstall — every prompt below runs from scratch."
|
||
;;
|
||
esac
|
||
fi
|
||
|
||
mkdir -p "$EA_DIR"
|
||
mkdir -p "$EA_DIR/config/asterisk" "$EA_DIR/config/easy-asterisk" \
|
||
"$EA_DIR/logs" "$EA_DIR/spool" "$EA_DIR/lib" "$EA_DIR/exports"
|
||
ensure_docker_dir_ownership "$EA_DIR"
|
||
cd "$EA_DIR" || return 1
|
||
|
||
_asterisk_refresh_vendor_files
|
||
|
||
# ── Networking mode ───────────────────────────────────────────────────────
|
||
echo ""
|
||
echo " Networking mode:"
|
||
echo " 1) FQDN (recommended) — TLS + TURN relay, every phone connects the"
|
||
echo " same way regardless of LAN/VLAN/remote"
|
||
echo " 2) LAN-only — no domain, self-signed cert, local network/VPN only"
|
||
local HA_NETMODE=""
|
||
prompt_text "Choose [1]:" "1" HA_NETMODE
|
||
|
||
local DOMAIN_NAME=""
|
||
if [[ "$HA_NETMODE" != "2" ]]; then
|
||
prompt_text "FQDN (e.g. asterisk.${SITE_DOMAIN:-example.com}) [blank=fall back to LAN-only]:" "" DOMAIN_NAME
|
||
[[ -z "$DOMAIN_NAME" ]] && log_warning "No FQDN entered — proceeding in LAN-only mode."
|
||
fi
|
||
|
||
# ── Local networks / VLANs ────────────────────────────────────────────────
|
||
# Feeds HAS_VLANS/VLAN_SUBNETS into .env, which the entrypoint reads to add
|
||
# extra local_net= entries in pjsip.conf so phones on those subnets get
|
||
# correct NAT/SDP handling (this is what fixes the "no sound" symptom for
|
||
# devices on a VLAN the server isn't itself attached to).
|
||
echo ""
|
||
echo " Detecting networks this host can see..."
|
||
local DETECTED_NETS=""
|
||
DETECTED_NETS="$(ip -o -f inet addr show scope global 2>/dev/null \
|
||
| awk '{print $2, $4}' \
|
||
| grep -Ev '^(docker|br-|veth|tun|tap|wg)' \
|
||
| awk '{ split($2,a,"/"); split(a[1],o,"."); print o[1]"."o[2]"."o[3]".0/"a[2] }' \
|
||
| sort -u)"
|
||
if [[ -n "$DETECTED_NETS" ]]; then
|
||
echo " This host is directly attached to:"
|
||
echo "$DETECTED_NETS" | sed 's/^/ /'
|
||
fi
|
||
echo " Phones on OTHER VLANs (this server usually can't see those directly)"
|
||
echo " still need to be listed here so their media is treated as local/trusted."
|
||
local VLAN_SUBNETS_VAL=""
|
||
prompt_text "VLAN/VPN subnets, space-separated CIDRs [blank=none]:" "" VLAN_SUBNETS_VAL
|
||
local HAS_VLANS_VAL="n"
|
||
[[ -n "$VLAN_SUBNETS_VAL" ]] && HAS_VLANS_VAL="y"
|
||
|
||
# ── Secrets ───────────────────────────────────────────────────────────────
|
||
local TURN_PASSWORD
|
||
TURN_PASSWORD="$(generate_password 24)"
|
||
|
||
local TURN_SERVER_VAL=""
|
||
[[ -n "$DOMAIN_NAME" ]] && TURN_SERVER_VAL="${DOMAIN_NAME}:3478"
|
||
|
||
_asterisk_write_compose
|
||
|
||
# ── Pick a free port for the web admin ─────────────────────────────────────
|
||
# Hardcoding a single number gets fragile fast once several services share
|
||
# a host — CrowdSec's own LAPI already collides with 8080 by default (its
|
||
# own upstream default, confirmed against its real config.yaml). Scan
|
||
# instead: start at 8081 and take the first port nothing is listening on,
|
||
# capped so a pathological box can't spin this forever.
|
||
local WEB_ADMIN_PORT_VAL=8081
|
||
local _port_scan_limit=$((WEB_ADMIN_PORT_VAL + 100))
|
||
while ss -tlnH "sport = :${WEB_ADMIN_PORT_VAL}" 2>/dev/null | grep -q . \
|
||
&& [[ "$WEB_ADMIN_PORT_VAL" -lt "$_port_scan_limit" ]]; do
|
||
WEB_ADMIN_PORT_VAL=$((WEB_ADMIN_PORT_VAL + 1))
|
||
done
|
||
if [[ "$WEB_ADMIN_PORT_VAL" -ge "$_port_scan_limit" ]]; then
|
||
log_warning "No free port found in 8081-${_port_scan_limit} — falling back to 8081 anyway."
|
||
WEB_ADMIN_PORT_VAL=8081
|
||
elif [[ "$WEB_ADMIN_PORT_VAL" != 8081 ]]; then
|
||
log_info "Port 8081 was already taken — web admin will use ${WEB_ADMIN_PORT_VAL} instead."
|
||
fi
|
||
|
||
# ── .env ──────────────────────────────────────────────────────────────────
|
||
cat > .env << ENV
|
||
# ── Domain ────────────────────────────────────────────────────
|
||
# Set to your FQDN for remote access. Leave empty for LAN-only.
|
||
DOMAIN_NAME=${DOMAIN_NAME}
|
||
|
||
# ── TURN/STUN ─────────────────────────────────────────────────
|
||
TURN_USERNAME=easyasterisk
|
||
TURN_PASSWORD=${TURN_PASSWORD}
|
||
TURN_PORT=3478
|
||
# For LAN-only: TURN_SERVER is empty. For FQDN: set to domain:3478
|
||
TURN_SERVER=${TURN_SERVER_VAL}
|
||
|
||
# ── RTP port range ────────────────────────────────────────────
|
||
RTP_START=10000
|
||
RTP_END=20000
|
||
|
||
# ── VLAN/VPN subnets ──────────────────────────────────────────
|
||
# Extra local_net= entries for phones on networks this server isn't
|
||
# itself attached to. Space-separated CIDRs.
|
||
HAS_VLANS=${HAS_VLANS_VAL}
|
||
VLAN_SUBNETS=${VLAN_SUBNETS_VAL}
|
||
|
||
# ── Web admin ─────────────────────────────────────────────────
|
||
# Picked automatically at install time (first free port starting at 8081) —
|
||
# see WEB_ADMIN_PORT_VAL in services/asterisk.sh if this ever needs to
|
||
# change again; don't hand-edit without also updating Caddy's Caddyfile and
|
||
# any firewall rules to match.
|
||
WEB_ADMIN_PORT=${WEB_ADMIN_PORT_VAL}
|
||
WEB_ADMIN_AUTH_DISABLED=false
|
||
ENV
|
||
chmod 600 .env
|
||
|
||
# ── Caddy reverse proxy for web admin ─────────────────────────────────────
|
||
# Decided before the firewall rules below so they can be scoped
|
||
# correctly: if a local Caddy ends up fronting the web admin, there's no
|
||
# reason to also expose it on the LAN — Caddy already reaches it over
|
||
# the host's internal network (host.docker.internal).
|
||
local EXTRA_BLOCK=""
|
||
if [ -d "$DOCKER_DIR/authelia" ]; then
|
||
local _use_auth=""
|
||
prompt_yn "Protect Asterisk web admin with Authelia SSO? (y/n):" "y" _use_auth
|
||
if [[ "$_use_auth" =~ ^[Yy]$ ]]; then
|
||
EXTRA_BLOCK=" import authelia"
|
||
# Disable built-in auth since Authelia handles it
|
||
sed -i "s/^WEB_ADMIN_AUTH_DISABLED=.*/WEB_ADMIN_AUTH_DISABLED=true/" .env
|
||
fi
|
||
fi
|
||
configure_caddy_for_service "Asterisk Web Admin" "${WEB_ADMIN_PORT_VAL}" "asterisk" "$EXTRA_BLOCK"
|
||
|
||
# ── UFW firewall rules ────────────────────────────────────────────────────
|
||
if command -v ufw &>/dev/null; then
|
||
log_info "Opening UFW ports for Asterisk + coturn..."
|
||
ufw allow 5060/udp
|
||
ufw allow 5060/tcp
|
||
ufw allow 5061/tcp
|
||
if [[ "$CADDY_SERVICE_CONFIGURED" == true && "$CADDY_SERVICE_MODE" == "local" ]]; then
|
||
ufw delete allow "${WEB_ADMIN_PORT_VAL}/tcp" 2>/dev/null || true
|
||
log_info "Web admin port ${WEB_ADMIN_PORT_VAL} kept off the LAN — Caddy fronts it locally."
|
||
else
|
||
ufw allow "${WEB_ADMIN_PORT_VAL}/tcp"
|
||
fi
|
||
ufw allow 8088/tcp
|
||
ufw allow 8089/tcp
|
||
ufw allow 3478/udp
|
||
ufw allow 3478/tcp
|
||
ufw allow 10000:20000/udp
|
||
ufw allow 49152:49252/udp
|
||
ensure_ufw_enabled
|
||
log_success "UFW rules added."
|
||
fi
|
||
|
||
# ── README ────────────────────────────────────────────────────────────────
|
||
write_readme "$EA_DIR" << 'MD'
|
||
# Easy Asterisk PBX + coturn
|
||
|
||
Self-hosted SIP PBX using Easy Asterisk with a coturn TURN/STUN server for
|
||
NAT traversal. Suitable for home intercom, VoIP handsets, and softphones.
|
||
|
||
## Manage
|
||
|
||
```bash
|
||
docker compose up -d --build # build image and start
|
||
docker compose up -d # start (after initial build)
|
||
docker compose down # stop
|
||
docker compose logs -f # follow logs
|
||
docker compose pull # update coturn image
|
||
docker compose up -d --build # rebuild asterisk image
|
||
```
|
||
|
||
## Management script
|
||
|
||
```bash
|
||
docker exec -it easy-asterisk easy-asterisk --help
|
||
```
|
||
|
||
## SIP client setup
|
||
|
||
| Setting | Value |
|
||
|-----------------|--------------------------------------|
|
||
| SIP server | <host-ip> (LAN) or your FQDN (FQDN) |
|
||
| SIP port | 5061 (TLS) / 5060 (UDP) |
|
||
| TURN server | <DOMAIN_NAME>:3478 (FQDN mode only) |
|
||
| TURN username | easyasterisk |
|
||
| TURN password | see .env → TURN_PASSWORD |
|
||
|
||
Recommended softphones: Linphone, Zoiper, Bria, Grandstream Wave.
|
||
|
||
For a phone to work the same way regardless of network (LAN, VLAN, remote,
|
||
no VPN), register it against `<DOMAIN_NAME>:5061` over TLS — that's what
|
||
FQDN mode is for. Plain UDP/TCP on 5060 still works for LAN-only devices,
|
||
but only the FQDN+TLS path is location-independent.
|
||
|
||
## VLANs / other subnets
|
||
|
||
`.env` → `HAS_VLANS`/`VLAN_SUBNETS` lists extra networks (space-separated
|
||
CIDRs) this server isn't itself attached to but that phones live on. These
|
||
become `local_net=` entries in `pjsip.conf` so NAT/SDP handling is correct
|
||
for those devices (missing entries here is the most common cause of calls
|
||
connecting with no audio). To change this after install:
|
||
|
||
```bash
|
||
docker exec -it easy-asterisk easy-asterisk
|
||
# Server Settings → Configure VLAN/VPN Subnets
|
||
```
|
||
|
||
## TLS certificate
|
||
|
||
If Caddy is installed and already holds a Let's Encrypt cert for
|
||
`DOMAIN_NAME` (i.e. there's a Caddyfile site block for that exact hostname),
|
||
the container mounts Caddy's cert store read-only and the entrypoint syncs
|
||
it in automatically on every start — and re-checks every 12h so renewals
|
||
get picked up without a restart. No Caddyfile block for the domain, or no
|
||
Caddy at all, falls back to a self-signed cert (phones must be configured
|
||
to accept it).
|
||
|
||
## Web admin
|
||
|
||
Access the Easy Asterisk web interface at http://<host-ip>:8081
|
||
or via your configured reverse-proxy domain. (8081 is the default; if that
|
||
port was already taken by something else on this box, the installer picked
|
||
the next free one instead — check WEB_ADMIN_PORT in .env for the actual
|
||
value.)
|
||
|
||
## Data directories (all inside ~/docker/asterisk/, included in backup)
|
||
|
||
| Directory | Contents |
|
||
|----------------------|---------------------------------|
|
||
| config/asterisk/ | /etc/asterisk — dialplan, SIP |
|
||
| config/easy-asterisk/| /etc/easy-asterisk — web config |
|
||
| logs/ | /var/log/asterisk |
|
||
| spool/ | /var/spool/asterisk |
|
||
| lib/ | /var/lib/asterisk |
|
||
|
||
## Ports
|
||
|
||
| Port | Protocol | Purpose |
|
||
|---------------|----------|----------------------------------|
|
||
| 5060 | UDP/TCP | SIP signalling (unencrypted) |
|
||
| 5061 | TCP | SIP over TLS |
|
||
| 8081 | TCP | Easy Asterisk web admin (default — see .env) |
|
||
| 8088/8089 | TCP | Asterisk HTTP/WS (ARI/AMI) |
|
||
| 3478 | UDP/TCP | TURN/STUN (coturn) |
|
||
| 10000–20000 | UDP | RTP media streams |
|
||
| 49152–49252 | UDP | TURN relay media ports |
|
||
MD
|
||
|
||
# ── Start ─────────────────────────────────────────────────────────────────
|
||
echo ""
|
||
local START_NOW=""
|
||
prompt_yn "Build and start Asterisk now? (y/n):" "y" START_NOW
|
||
if [ "$START_NOW" = "y" ] || [ "$START_NOW" = "Y" ]; then
|
||
docker compose up -d --build \
|
||
&& log_success "Easy Asterisk started" \
|
||
|| log_warning "Start failed — check: docker compose logs"
|
||
fi
|
||
|
||
# ── Summary ───────────────────────────────────────────────────────────────
|
||
echo ""
|
||
log_success "Easy Asterisk installed at $EA_DIR"
|
||
if [[ -n "$DOMAIN_NAME" ]]; then
|
||
echo " Mode: FQDN ($DOMAIN_NAME)"
|
||
echo " TURN server: ${DOMAIN_NAME}:3478"
|
||
else
|
||
echo " Mode: LAN-only"
|
||
echo " TURN server: (none — LAN/VPN only)"
|
||
fi
|
||
echo " SIP port: 5061 (TLS) / 5060 (UDP)"
|
||
echo " Web admin: http://$(hostname -I 2>/dev/null | awk '{print $1}' || echo localhost):${WEB_ADMIN_PORT_VAL}"
|
||
echo " Manage: docker compose -f $EA_DIR/docker-compose.yml <up|down|logs>"
|
||
echo " Script: docker exec -it easy-asterisk easy-asterisk --help"
|
||
echo ""
|
||
}
|
||
|
||
# Run immediately when executed directly (deferred until after function definition)
|
||
[[ "${_RUN_STANDALONE:-0}" == 1 ]] && install_asterisk
|