Claude
ec3f9bfd3f
New site config key: CADDY_REMOTE_HOST (set via 'sudo ./setup.sh configure'). When set, configure_caddy_for_service operates in "remote" mode instead of writing to a local Caddyfile: - Upstream uses CADDY_REMOTE_HOST:PORT (host IP, not container name) - Snippet saved to ~/docker/caddy-snippets/<subdomain>.caddy - User is shown scp/rsync commands to copy it to the Caddy machine Three modes in configure_caddy_for_service (lib/common.sh and inline stubs): local: ~/docker/caddy/ exists → write Caddyfile + reload (existing behavior) remote: CADDY_REMOTE_HOST set → save snippet, print copy instructions none: neither configured → silent return (unchanged) All 31 service standalone bootstrap stubs updated with the new logic. CADDY_REMOTE_HOST global added to all 42 standalone bootstrap sections. setup.sh configure now prompts for CADDY_REMOTE_HOST with a clear explanation. wolf.sh: add missing stubs (configure_caddy_for_service, write_readme, prompt_yn, ensure_docker_dir_ownership) and the Authelia/Caddy/start calls that were missing from the install function. https://claude.ai/code/session_014CCYqVwW6d6f5dw1qRokYt
430 lines
16 KiB
Bash
430 lines
16 KiB
Bash
#!/bin/bash
|
||
# services/caddy.sh — Caddy reverse proxy + automatic HTTPS.
|
||
# Part of the modular post-install system (sourced by setup.sh).
|
||
#
|
||
# Can also be run standalone on any machine:
|
||
# sudo bash caddy.sh
|
||
# (Docker must already be installed when run standalone)
|
||
#
|
||
# Caddy is the front door for the homelab: it terminates TLS (automatic
|
||
# Let's Encrypt certificates), reverse-proxies to your other services, and
|
||
# writes JSON access logs that CrowdSec reads for intrusion prevention.
|
||
#
|
||
# Each web service adds its own site block to $CADDY_DIR/Caddyfile (the shared
|
||
# configure_caddy_for_service helper does this automatically), then Caddy is
|
||
# reloaded without downtime.
|
||
|
||
# ── Standalone bootstrap ──────────────────────────────────────────────────────
|
||
# Detected when the script is executed directly rather than sourced by setup.sh.
|
||
# Sets up helpers and globals, then defers execution until after the function
|
||
# definition at the bottom of this file.
|
||
if [[ "${BASH_SOURCE[0]}" == "${0}" ]]; then
|
||
[[ "$(id -u)" == "0" ]] || { echo "Run with sudo: sudo bash $0"; exit 1; }
|
||
|
||
_SELF_DIR="$(cd "$(dirname "${BASH_SOURCE[0]}")" && pwd)"
|
||
_COMMON="$_SELF_DIR/../lib/common.sh"
|
||
|
||
if [[ -f "$_COMMON" ]]; then
|
||
# Full repo present — use the real helpers (picks up ~/docker/.config too)
|
||
# shellcheck source=../lib/common.sh
|
||
source "$_COMMON"
|
||
else
|
||
# One-off copy — inline minimal stubs so the script works without the repo
|
||
log_info() { echo -e "\033[0;34m[INFO]\033[0m $*"; }
|
||
log_success() { echo -e "\033[0;32m[OK]\033[0m $*"; }
|
||
log_warning() { echo -e "\033[1;33m[WARN]\033[0m $*"; }
|
||
log_error() { echo -e "\033[0;31m[ERROR]\033[0m $*" >&2; }
|
||
|
||
require_docker() {
|
||
command -v docker &>/dev/null || {
|
||
log_error "Docker not found. Install it first:"
|
||
log_error " curl -fsSL https://get.docker.com | sudo sh"
|
||
return 1
|
||
}
|
||
docker compose version &>/dev/null || {
|
||
log_error "Docker Compose plugin missing:"
|
||
log_error " sudo apt-get install -y docker-compose-plugin"
|
||
return 1
|
||
}
|
||
}
|
||
|
||
ensure_docker_dir_ownership() {
|
||
chown -R "$ACTUAL_USER:$ACTUAL_USER" "$@" 2>/dev/null || true
|
||
}
|
||
|
||
# Match common.sh's eval-based pattern so local vars in install_* are set correctly
|
||
prompt_text() {
|
||
local _q="$1" _def="$2" _var="$3" _r
|
||
[[ "${UNATTENDED:-false}" == "true" ]] && { eval "$_var='$_def'"; return; }
|
||
read -r -p " $_q " _r
|
||
eval "$_var='${_r:-$_def}'"
|
||
}
|
||
|
||
prompt_yn() {
|
||
local _q="$1" _def="$2" _var="$3" _r
|
||
[[ "${UNATTENDED:-false}" == "true" ]] && { eval "$_var='$_def'"; return; }
|
||
read -r -p " $_q " _r
|
||
eval "$_var='${_r:-$_def}'"
|
||
}
|
||
|
||
configure_caddy_for_service() {
|
||
local _name="$1" _upstream="$2" _subdomain="$3" _extra="${4:-}"
|
||
local _caddy_dir="$DOCKER_DIR/caddy"
|
||
local _caddyfile="$_caddy_dir/Caddyfile"
|
||
local _display_port="${_upstream##*:}"
|
||
|
||
# Determine mode: local Caddy, remote Caddy, or none
|
||
local _mode="none"
|
||
[[ -d "$_caddy_dir" ]] && _mode="local"
|
||
[[ -n "${CADDY_REMOTE_HOST:-}" ]] && [[ "$_mode" != "local" ]] && _mode="remote"
|
||
[[ "$_mode" == "none" ]] && {
|
||
log_info "Access $_name directly on port $_display_port."
|
||
return 0
|
||
}
|
||
|
||
echo ""
|
||
local _do_caddy=""
|
||
if [[ "$_mode" == "remote" ]]; then
|
||
log_info "Remote Caddy configured (${CADDY_REMOTE_HOST})."
|
||
log_info "A snippet file will be saved to ~/docker/caddy-snippets/."
|
||
fi
|
||
read -r -p " Configure Caddy reverse proxy for $_name? [y/N]: " _do_caddy
|
||
[[ "${_do_caddy,,}" == "y" ]] || {
|
||
log_info "Skipping — access at: http://localhost:$_display_port"
|
||
return 0
|
||
}
|
||
|
||
# Domain prompt — pre-fill from SITE_DOMAIN when available
|
||
local _default_domain=""
|
||
if [[ -n "${SITE_DOMAIN:-}" ]] && [[ "$SITE_DOMAIN" != "example.com" ]]; then
|
||
_default_domain="${_subdomain}.${SITE_DOMAIN}"
|
||
log_info "Default: $_default_domain"
|
||
fi
|
||
local _domain=""
|
||
read -r -p " Domain [${_default_domain:-required}]: " _domain
|
||
_domain="${_domain:-$_default_domain}"
|
||
[[ -n "$_domain" ]] || { log_warning "No domain entered — skipping Caddy."; return 0; }
|
||
|
||
# Build upstream — remote Caddy uses host IP:port, not container name
|
||
local _block_upstream="$_upstream"
|
||
if [[ "$_mode" == "remote" ]]; then
|
||
_block_upstream="${CADDY_REMOTE_HOST}:${_display_port}"
|
||
fi
|
||
|
||
local _site_block
|
||
_site_block="$(cat << CBLOCK
|
||
|
||
# $_name
|
||
${_domain} {
|
||
reverse_proxy ${_block_upstream}
|
||
|
||
header {
|
||
Strict-Transport-Security "max-age=31536000; includeSubDomains; preload"
|
||
X-Content-Type-Options "nosniff"
|
||
X-Frame-Options "SAMEORIGIN"
|
||
Referrer-Policy "strict-origin-when-cross-origin"
|
||
}
|
||
|
||
log {
|
||
output file /var/log/caddy/${_domain}.log
|
||
format json
|
||
}
|
||
${_extra}
|
||
}
|
||
CBLOCK
|
||
)"
|
||
|
||
if [[ "$_mode" == "local" ]]; then
|
||
if [[ -f "$_caddyfile" ]]; then
|
||
local _bk="$_caddy_dir/Caddyfile.backup.$(date +%Y%m%d-%H%M%S)"
|
||
cp "$_caddyfile" "$_bk"
|
||
log_info "Backed up Caddyfile to $(basename "$_bk")"
|
||
else
|
||
touch "$_caddyfile"
|
||
fi
|
||
|
||
if grep -q "^${_domain}" "$_caddyfile" 2>/dev/null; then
|
||
log_warning "$_domain already in Caddyfile"
|
||
local _ow=""
|
||
read -r -p " Overwrite? [y/N]: " _ow
|
||
[[ "${_ow,,}" == "y" ]] || { log_info "Keeping existing entry."; return 0; }
|
||
sed -i "/^${_domain}/,/^}/d" "$_caddyfile"
|
||
fi
|
||
|
||
printf '%s\n' "$_site_block" >> "$_caddyfile"
|
||
log_success "Added $_domain to Caddyfile"
|
||
docker exec caddy caddy fmt --overwrite /etc/caddy/Caddyfile 2>/dev/null || true
|
||
if docker exec caddy caddy reload --config /etc/caddy/Caddyfile 2>/dev/null; then
|
||
log_success "$_name accessible at: https://$_domain"
|
||
else
|
||
log_warning "Reload failed — check: docker logs caddy"
|
||
log_info "Manual reload: docker exec caddy caddy reload --config /etc/caddy/Caddyfile"
|
||
fi
|
||
else
|
||
local _snippet_dir="$DOCKER_DIR/caddy-snippets"
|
||
local _snippet_file="$_snippet_dir/${_subdomain}.caddy"
|
||
mkdir -p "$_snippet_dir"
|
||
printf '%s\n' "$_site_block" > "$_snippet_file"
|
||
chown "$ACTUAL_USER:$ACTUAL_USER" "$_snippet_file" 2>/dev/null || true
|
||
log_success "Snippet saved: $_snippet_file"
|
||
log_info "Copy to Caddy machine:"
|
||
log_info " scp $_snippet_file caddy-host:~/caddy-snippets/"
|
||
log_info " rsync -av $_snippet_dir/ caddy-host:~/caddy-snippets/ (all at once)"
|
||
fi
|
||
}
|
||
write_readme() {
|
||
local _dir="$1"; shift
|
||
mkdir -p "$_dir"
|
||
cat > "$_dir/README.md"
|
||
}
|
||
fi
|
||
|
||
# Globals — ACTUAL_USER/ACTUAL_HOME must come before DOCKER_DIR
|
||
# ($HOME under sudo is /root, not the real user's home)
|
||
ACTUAL_USER="${ACTUAL_USER:-${SUDO_USER:-$USER}}"
|
||
ACTUAL_HOME="$(getent passwd "$ACTUAL_USER" 2>/dev/null | cut -d: -f6 || echo "${HOME:-/root}")"
|
||
DOCKER_DIR="${DOCKER_DIR:-$ACTUAL_HOME/docker}"
|
||
DRY_RUN="${DRY_RUN:-false}"
|
||
UNATTENDED="${UNATTENDED:-false}"
|
||
SITE_TZ="${SITE_TZ:-$(cat /etc/timezone 2>/dev/null || echo UTC)}"
|
||
SITE_DOMAIN="${SITE_DOMAIN:-example.com}"
|
||
SITE_CADDY_NET="${SITE_CADDY_NET:-caddy_net}"
|
||
|
||
register_service() { :; } # no-op — no wizard to register into
|
||
_RUN_STANDALONE=1
|
||
fi
|
||
# ─────────────────────────────────────────────────────────────────────────────
|
||
|
||
register_service caddy homelab "Reverse proxy + automatic HTTPS (Caddy)" 443
|
||
|
||
install_caddy() {
|
||
require_docker || return 1
|
||
log_info "Installing Caddy reverse proxy..."
|
||
|
||
local CADDY_DIR="$DOCKER_DIR/caddy"
|
||
|
||
echo ""
|
||
echo "┌─────────────────────────────────────────────────────────────────┐"
|
||
echo "│ CADDY - Modern Web Server & Reverse Proxy │"
|
||
echo "│ Automatic HTTPS, reverse proxy for all your services │"
|
||
echo "│ Port: 80 (HTTP), 443 (HTTPS) │"
|
||
echo "└─────────────────────────────────────────────────────────────────┘"
|
||
echo ""
|
||
|
||
# ── DRY-RUN: describe the plan and bail before touching anything real ────
|
||
if [ "$DRY_RUN" = true ]; then
|
||
echo "[DRY-RUN] Would create $CADDY_DIR (data/, config/)"
|
||
echo "[DRY-RUN] Would write $CADDY_DIR/docker-compose.yml (ports 80/443 + HTTP/3)"
|
||
echo "[DRY-RUN] Would write a starter $CADDY_DIR/Caddyfile (if none exists)"
|
||
echo "[DRY-RUN] Would write $CADDY_DIR/README.md"
|
||
echo "[DRY-RUN] Would optionally start Caddy (docker compose up -d)"
|
||
return 0
|
||
fi
|
||
|
||
# Reconfigure guard: warn if Caddy already looks installed.
|
||
if [ -f "$CADDY_DIR/Caddyfile" ] || [ -f "$CADDY_DIR/docker-compose.yml" ]; then
|
||
echo ""
|
||
echo "⚠ Caddy appears to be already installed at $CADDY_DIR"
|
||
local RECONFIGURE_CADDY=""
|
||
prompt_yn "Do you want to reconfigure it? (y/n):" "n" RECONFIGURE_CADDY
|
||
if [ "$RECONFIGURE_CADDY" != "y" ] && [ "$RECONFIGURE_CADDY" != "Y" ]; then
|
||
echo " Skipping Caddy installation"
|
||
return 0
|
||
fi
|
||
fi
|
||
|
||
mkdir -p "$CADDY_DIR/data" "$CADDY_DIR/config"
|
||
ensure_docker_dir_ownership "$CADDY_DIR"
|
||
|
||
# Backup existing Caddyfile if it exists
|
||
if [ -f "$CADDY_DIR/Caddyfile" ]; then
|
||
mkdir -p "$CADDY_DIR/backups"
|
||
local BACKUP_FILE="$CADDY_DIR/backups/Caddyfile.backup.$(date +%Y%m%d_%H%M%S)"
|
||
cp "$CADDY_DIR/Caddyfile" "$BACKUP_FILE"
|
||
echo " ✓ Backed up existing Caddyfile to: $BACKUP_FILE"
|
||
fi
|
||
|
||
cd "$CADDY_DIR" || return 1
|
||
|
||
cat > docker-compose.yml << 'CADDY_COMPOSE'
|
||
name: caddy
|
||
|
||
services:
|
||
caddy:
|
||
image: caddy:latest
|
||
container_name: caddy
|
||
restart: unless-stopped
|
||
ports:
|
||
- "80:80"
|
||
- "443:443"
|
||
- "443:443/udp" # HTTP/3
|
||
volumes:
|
||
- ./Caddyfile:/etc/caddy/Caddyfile
|
||
- ./data:/data
|
||
- ./config:/config
|
||
- /var/log/caddy:/var/log/caddy
|
||
environment:
|
||
- ACME_AGREE=true
|
||
labels:
|
||
- "io.podman.annotations.label/crowdsec.enable=true"
|
||
networks:
|
||
- caddy_net
|
||
|
||
networks:
|
||
caddy_net:
|
||
driver: bridge
|
||
name: caddy_net
|
||
CADDY_COMPOSE
|
||
|
||
# Create Caddyfile if it doesn't exist
|
||
if [ ! -f "Caddyfile" ]; then
|
||
cat > Caddyfile << 'CADDYFILE'
|
||
{
|
||
# Global options
|
||
admin off
|
||
# Email for Let's Encrypt notifications
|
||
# email admin@yourdomain.com
|
||
}
|
||
|
||
# Example configuration - edit this for your services
|
||
# Uncomment and modify these examples:
|
||
|
||
# ── Port reference ────────────────────────────────────────────────────────────
|
||
# Services on caddy_net → use the container name and INTERNAL port:
|
||
# reverse_proxy myservice:80 (what the container listens on inside Docker)
|
||
#
|
||
# Accessing a service directly from another machine → use the HOST port:
|
||
# http://server-ip:8085 (the left side of ports: "8085:80" in compose)
|
||
#
|
||
# The ports: mapping is only for direct host access.
|
||
# Caddy bypasses it entirely and talks container-to-container.
|
||
# ─────────────────────────────────────────────────────────────────────────────
|
||
|
||
# ── Authelia SSO snippet (auto-added by installer if Authelia is installed) ───
|
||
# (authelia) {
|
||
# forward_auth authelia:9091 {
|
||
# uri /api/authz/forward-auth
|
||
# copy_headers Remote-User Remote-Groups Remote-Name Remote-Email
|
||
# }
|
||
# }
|
||
#
|
||
# Authelia login portal
|
||
# auth.yourdomain.com {
|
||
# reverse_proxy authelia:9091
|
||
# }
|
||
#
|
||
# To protect any service with Authelia, add: import authelia
|
||
# Example:
|
||
# myservice.yourdomain.com {
|
||
# import authelia
|
||
# reverse_proxy container_name:port
|
||
# }
|
||
|
||
# ActualBudget
|
||
# budget.yourdomain.com {
|
||
# log {
|
||
# output file /var/log/caddy/actualbudget-access.log
|
||
# format json
|
||
# level INFO
|
||
# }
|
||
# reverse_proxy actualbudget:5006
|
||
# header {
|
||
# Strict-Transport-Security "max-age=31536000; includeSubDomains; preload"
|
||
# X-Frame-Options "SAMEORIGIN"
|
||
# X-Content-Type-Options "nosniff"
|
||
# X-XSS-Protection "1; mode=block"
|
||
# Referrer-Policy "strict-origin-when-cross-origin"
|
||
# }
|
||
# }
|
||
|
||
# Add more services here...
|
||
CADDYFILE
|
||
echo " ✓ Created example Caddyfile"
|
||
else
|
||
echo " ℹ Using existing Caddyfile"
|
||
fi
|
||
|
||
chown -R "$ACTUAL_USER:$ACTUAL_USER" "$CADDY_DIR"
|
||
echo " ✓ Caddy configured at $CADDY_DIR"
|
||
|
||
write_readme "$CADDY_DIR" << 'CADDY_README'
|
||
# Caddy — reverse proxy + automatic HTTPS
|
||
|
||
Caddy is the front door for this box. It:
|
||
|
||
- Reverse-proxies incoming requests to your other services.
|
||
- Obtains and renews TLS certificates automatically (Let's Encrypt / ZeroSSL),
|
||
so every site is HTTPS with no manual cert wrangling.
|
||
- Listens on **80** (HTTP, redirects to HTTPS) and **443** (HTTPS, incl. HTTP/3
|
||
on 443/udp).
|
||
- Writes JSON access logs to `/var/log/caddy/` — these are what CrowdSec reads
|
||
to detect and ban malicious traffic.
|
||
|
||
## Adding services
|
||
|
||
Other services add their own **site blocks** to `./Caddyfile` (the installer's
|
||
`configure_caddy_for_service` helper appends them automatically when you install
|
||
a web service). You can also edit it by hand:
|
||
|
||
```
|
||
myservice.example.com {
|
||
reverse_proxy container_name:1234
|
||
log {
|
||
output file /var/log/caddy/myservice.example.com.log
|
||
format json
|
||
}
|
||
}
|
||
```
|
||
|
||
**Port rule:** use the container's *internal* port, not the host-mapped port.
|
||
If a service has `ports: "8085:80"` in its compose file, Caddy uses `:80`
|
||
(container-to-container on `caddy_net`). The `8085` is only for direct
|
||
host access from another machine.
|
||
|
||
## Reloading after edits
|
||
|
||
Apply Caddyfile changes without downtime:
|
||
|
||
```
|
||
docker exec caddy caddy reload --config /etc/caddy/Caddyfile
|
||
```
|
||
|
||
## Start / stop
|
||
|
||
From this folder (`~/docker/caddy`):
|
||
|
||
```
|
||
docker compose up -d # start
|
||
docker compose down # stop
|
||
docker compose logs -f # follow logs
|
||
```
|
||
|
||
## Where things live
|
||
|
||
- Caddyfile: `~/docker/caddy/Caddyfile` (mounted at `/etc/caddy/Caddyfile`)
|
||
- Access logs: `/var/log/caddy/*.log` (JSON; consumed by CrowdSec)
|
||
- Certs/state: `~/docker/caddy/data` and `~/docker/caddy/config`
|
||
- Backups of the Caddyfile: `~/docker/caddy/backups/`
|
||
CADDY_README
|
||
|
||
local START_CADDY=""
|
||
prompt_yn "Start Caddy now? (y/n):" "y" START_CADDY
|
||
if [ "$START_CADDY" = "y" ] || [ "$START_CADDY" = "Y" ]; then
|
||
docker compose up -d 2>/dev/null && echo " ✓ Caddy started" || echo " ⚠ Failed to start Caddy"
|
||
fi
|
||
|
||
echo ""
|
||
echo " Configuration file: $CADDY_DIR/Caddyfile"
|
||
echo " Edit Caddyfile to add your domains and services"
|
||
echo " Reload config: docker exec caddy caddy reload --config /etc/caddy/Caddyfile"
|
||
echo ""
|
||
echo " ⚠ IMPORTANT: Edit the Caddyfile to configure your domains!"
|
||
echo " - Uncomment and modify the example configurations"
|
||
echo " - Add your domain names"
|
||
echo " - Configure services you want to expose"
|
||
echo ""
|
||
}
|
||
|
||
# Run immediately when executed directly (deferred until after function definition)
|
||
[[ "${_RUN_STANDALONE:-0}" == 1 ]] && install_caddy
|