root/ubuntu-post-install
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
Files
61ca1aa69faaa8d0296868b6b5b2004696d0d96f
ubuntu-post-install/ubuntu-post-install.sh
T
Claude 61ca1aa69f Make script rerunnable with rsync/rclone and full/split backup options 
- Add software detection for Docker, Samba, NetBird, RustDesk, rclone, rsync
- Script shows current system status and offers to reinstall/reconfigure
- All components now optional with y/n prompts
- Add backup tool selection: rsync (recommended for local) vs rclone (cloud)
- Add backup mode selection: full (one drive) vs split (two drives)
- Generate appropriate backup script based on tool + mode selection
- Update summary section to only show installed components
- Update README with new features, rsync vs rclone comparison, backup modes
2025-12-28 02:37:44 +00:00

1142 lines
43 KiB
Bash
Raw Blame History

#!/bin/bash
# Ubuntu 24.04 Post-Installation Script
# Run with: sudo bash post-install.sh
# This script is rerunnable - it detects existing installations
echo "=== Ubuntu 24.04 Post-Installation Script ==="
echo ""
# Check if running as root
if [ "$EUID" -ne 0 ]; then
echo "Please run as root (use sudo)"
exit 1
fi
# Get the actual user (not root)
ACTUAL_USER="${SUDO_USER:-$USER}"
ACTUAL_HOME=$(getent passwd "$ACTUAL_USER" | cut -d: -f6)
echo "Note: Script will continue even if individual packages fail to install"
echo ""
# ============================================================================
# SOFTWARE DETECTION FUNCTIONS
# ============================================================================
is_docker_installed() {
command -v docker &> /dev/null && systemctl is-active --quiet docker 2>/dev/null
}
is_samba_installed() {
command -v smbd &> /dev/null && systemctl is-active --quiet smbd 2>/dev/null
}
is_netbird_installed() {
command -v netbird &> /dev/null
}
is_rustdesk_installed() {
command -v rustdesk &> /dev/null || dpkg -l rustdesk &> /dev/null
}
is_rclone_installed() {
command -v rclone &> /dev/null
}
is_rsync_installed() {
command -v rsync &> /dev/null
}
# ============================================================================
# SHOW CURRENT INSTALLATION STATUS
# ============================================================================
echo "━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━"
echo "CURRENT SYSTEM STATUS"
echo "━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━"
echo ""
if is_docker_installed; then
echo " ✓ Docker: Installed ($(docker --version 2>/dev/null | cut -d' ' -f3 | tr -d ','))"
else
echo " ○ Docker: Not installed"
fi
if is_samba_installed; then
echo " ✓ Samba: Installed and running"
else
echo " ○ Samba: Not installed"
fi
if is_netbird_installed; then
echo " ✓ NetBird: Installed"
else
echo " ○ NetBird: Not installed"
fi
if is_rustdesk_installed; then
echo " ✓ RustDesk: Installed"
else
echo " ○ RustDesk: Not installed"
fi
if is_rclone_installed; then
echo " ✓ rclone: Installed"
else
echo " ○ rclone: Not installed"
fi
if is_rsync_installed; then
echo " ✓ rsync: Installed"
else
echo " ○ rsync: Not installed"
fi
echo ""
echo "This script can reinstall/reconfigure any component."
echo ""
# Update package list
echo "Updating package lists..."
apt update
# Install basic utilities
echo ""
echo "Installing basic utilities..."
echo " - net-tools: Network configuration tools (ifconfig, netstat, etc.)"
echo " - ncdu: Disk usage analyzer with ncurses interface"
echo " - git: Version control system"
echo " - curl: Command-line tool for transferring data with URLs"
echo " - wget: Network downloader"
echo " - vim: Advanced text editor"
echo " - htop: Interactive process viewer"
echo " - tree: Display directory structure in tree format"
echo " - zip/unzip: Archive compression utilities"
echo " - rclone: Rsync for cloud storage and local drives (backup tool)"
echo ""
apt install -y \
net-tools \
ncdu \
git \
curl \
wget \
vim \
htop \
tree \
zip \
unzip \
rclone || echo "Warning: Some utilities failed to install, continuing..."
# Install OpenSSH Server
echo ""
echo "Installing OpenSSH Server..."
echo " - openssh-server: SSH server for remote access"
echo ""
apt install -y openssh-server || echo "Warning: OpenSSH server installation failed, continuing..."
# Start and enable SSH service
systemctl start ssh || echo "Warning: Failed to start SSH"
systemctl enable ssh || echo "Warning: Failed to enable SSH"
# Generate SSH key for this computer
echo ""
echo "━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━"
echo "SSH KEY GENERATION"
echo "━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━"
echo ""
read -p "Generate a new SSH key for this computer? (y/n): " GENERATE_KEY
if [ "$GENERATE_KEY" = "y" ] || [ "$GENERATE_KEY" = "Y" ]; then
echo ""
read -p "Enter a label/comment for the key (e.g., email or hostname) [default: $ACTUAL_USER@$(hostname)]: " KEY_COMMENT
if [ -z "$KEY_COMMENT" ]; then
KEY_COMMENT="$ACTUAL_USER@$(hostname)"
fi
# Check if key already exists
if [ -f "$ACTUAL_HOME/.ssh/id_rsa" ]; then
echo ""
echo "⚠️ WARNING: SSH key already exists at $ACTUAL_HOME/.ssh/id_rsa"
read -p "Overwrite existing key? This cannot be undone! (y/n): " OVERWRITE_KEY
if [ "$OVERWRITE_KEY" != "y" ] && [ "$OVERWRITE_KEY" != "Y" ]; then
echo "Skipping key generation."
GENERATE_KEY="n"
fi
fi
if [ "$GENERATE_KEY" = "y" ] || [ "$GENERATE_KEY" = "Y" ]; then
echo ""
echo "Generating 4096-bit RSA key pair..."
echo "This may take a moment..."
# Generate key as the actual user, not root
sudo -u "$ACTUAL_USER" ssh-keygen -t rsa -b 4096 -C "$KEY_COMMENT" -f "$ACTUAL_HOME/.ssh/id_rsa" -N ""
if [ $? -eq 0 ]; then
echo ""
echo "✓ SSH key generated successfully!"
echo ""
echo "Private key: $ACTUAL_HOME/.ssh/id_rsa (keep this secret!)"
echo "Public key: $ACTUAL_HOME/.ssh/id_rsa.pub"
echo ""
echo "━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━"
echo "Your PUBLIC key (safe to share):"
echo "━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━"
cat "$ACTUAL_HOME/.ssh/id_rsa.pub"
echo "━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━"
echo ""
echo "To use this key:"
echo " • Add to GitHub: Settings → SSH and GPG keys → New SSH key"
echo " • Add to servers: Copy above key to remote ~/.ssh/authorized_keys"
echo " • View anytime: cat ~/.ssh/id_rsa.pub"
echo ""
else
echo "✗ Failed to generate SSH key"
fi
fi
else
echo "Skipping SSH key generation."
fi
# Import SSH keys from GitHub/Launchpad
echo ""
read -p "Import SSH keys from GitHub? (enter username or leave blank to skip): " GITHUB_USER
read -p "Import SSH keys from Launchpad? (enter username or leave blank to skip): " LAUNCHPAD_USER
KEYS_IMPORTED=false
# Create .ssh directory if it doesn't exist
mkdir -p "$ACTUAL_HOME/.ssh"
touch "$ACTUAL_HOME/.ssh/authorized_keys"
chmod 700 "$ACTUAL_HOME/.ssh"
chmod 600 "$ACTUAL_HOME/.ssh/authorized_keys"
if [ -n "$GITHUB_USER" ]; then
echo "Importing SSH keys from GitHub user: $GITHUB_USER"
if curl -fsSL "https://github.com/$GITHUB_USER.keys" >> "$ACTUAL_HOME/.ssh/authorized_keys" 2>/dev/null; then
echo "✓ GitHub keys imported successfully"
KEYS_IMPORTED=true
else
echo "✗ Failed to import GitHub keys"
fi
fi
if [ -n "$LAUNCHPAD_USER" ]; then
echo "Importing SSH keys from Launchpad user: $LAUNCHPAD_USER"
if curl -fsSL "https://launchpad.net/~$LAUNCHPAD_USER/+sshkeys" >> "$ACTUAL_HOME/.ssh/authorized_keys" 2>/dev/null; then
echo "✓ Launchpad keys imported successfully"
KEYS_IMPORTED=true
else
echo "✗ Failed to import Launchpad keys"
fi
fi
# Fix ownership
chown -R "$ACTUAL_USER:$ACTUAL_USER" "$ACTUAL_HOME/.ssh"
# Disable password authentication if keys were imported
if [ "$KEYS_IMPORTED" = true ]; then
echo ""
echo "SSH keys imported. Disabling password authentication..."
# Backup sshd_config
cp /etc/ssh/sshd_config /etc/ssh/sshd_config.backup
# Disable password authentication
sed -i 's/^#*PasswordAuthentication yes/PasswordAuthentication no/' /etc/ssh/sshd_config
sed -i 's/^#*PasswordAuthentication no/PasswordAuthentication no/' /etc/ssh/sshd_config
# Ensure these settings are also set
grep -q "^PasswordAuthentication" /etc/ssh/sshd_config || echo "PasswordAuthentication no" >> /etc/ssh/sshd_config
# Restart SSH service to apply changes
systemctl restart ssh
echo "✓ Password authentication disabled. SSH key authentication required."
echo "✓ Backup saved to /etc/ssh/sshd_config.backup"
else
echo ""
echo "No SSH keys imported. Password authentication remains enabled."
fi
# Docker Installation
echo ""
echo "━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━"
echo "DOCKER INSTALLATION"
echo "━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━"
echo ""
INSTALL_DOCKER="y"
if is_docker_installed; then
echo "Docker is already installed: $(docker --version 2>/dev/null)"
read -p "Reinstall Docker? (y/n): " INSTALL_DOCKER
fi
if [ "$INSTALL_DOCKER" = "y" ] || [ "$INSTALL_DOCKER" = "Y" ]; then
echo ""
echo "Installing Docker prerequisites..."
echo " - ca-certificates: SSL/TLS certificates for secure connections"
echo " - gnupg: GNU Privacy Guard for package verification"
echo " - lsb-release: Provides Ubuntu version information"
echo ""
apt install -y \
ca-certificates \
gnupg \
lsb-release || echo "Warning: Some prerequisites failed to install, continuing..."
echo ""
echo "Installing Docker..."
echo " - Docker Engine: Container runtime platform"
echo " - Docker Compose: Multi-container application orchestration"
echo ""
# Remove old Docker packages if they exist
apt remove -y docker docker-engine docker.io containerd runc 2>/dev/null || true
# Add Docker's official GPG key
install -m 0755 -d /etc/apt/keyrings
curl -fsSL https://download.docker.com/linux/ubuntu/gpg -o /etc/apt/keyrings/docker.asc
chmod a+r /etc/apt/keyrings/docker.asc
# Add Docker repository
echo \
"deb [arch=$(dpkg --print-architecture) signed-by=/etc/apt/keyrings/docker.asc] https://download.docker.com/linux/ubuntu \
$(. /etc/os-release && echo "$VERSION_CODENAME") stable" | \
tee /etc/apt/sources.list.d/docker.list > /dev/null
# Update package list with Docker repo
apt update
# Install Docker Engine, CLI, containerd, and Docker Compose plugin
apt install -y docker-ce docker-ce-cli containerd.io docker-buildx-plugin docker-compose-plugin || echo "Warning: Docker installation failed, continuing..."
# Start and enable Docker service
systemctl start docker || echo "Warning: Failed to start Docker"
systemctl enable docker || echo "Warning: Failed to enable Docker"
# Add current user to docker group (if not root)
if [ -n "$SUDO_USER" ]; then
usermod -aG docker "$SUDO_USER"
echo "User $SUDO_USER added to docker group"
fi
# Verify Docker installation
echo ""
echo "Verifying Docker installation..."
docker --version || echo "Warning: Docker verification failed"
docker compose version || echo "Warning: Docker Compose verification failed"
else
echo "Skipping Docker installation."
fi
# Samba File Sharing (Optional)
echo ""
echo "━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━"
echo "SAMBA FILE SHARING (Optional)"
echo "━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━"
echo ""
echo "Samba allows you to share folders over the network to Windows, Mac, and Linux."
echo "The script will share your primary drive at ~/drives/primary"
echo ""
if is_samba_installed; then
echo "Samba is already installed and running."
if grep -q "\[Primary\]" /etc/samba/smb.conf 2>/dev/null; then
echo " Share 'Primary' is configured at: $ACTUAL_HOME/drives/primary"
fi
echo ""
read -p "Reconfigure Samba? (y/n): " INSTALL_SAMBA
else
read -p "Install and configure Samba file sharing? (y/n): " INSTALL_SAMBA
fi
if [ "$INSTALL_SAMBA" = "y" ] || [ "$INSTALL_SAMBA" = "Y" ]; then
echo ""
echo "Installing Samba file sharing..."
echo " - Samba: SMB/CIFS file server for network file sharing"
echo ""
apt install -y samba || echo "Warning: Samba installation failed, continuing..."
# Configure Samba share for primary drive
if command -v smbd &> /dev/null; then
echo ""
echo "Configuring Samba share for primary drive..."
# Backup existing config
cp /etc/samba/smb.conf /etc/samba/smb.conf.backup-$(date +%Y%m%d-%H%M%S)
# Add Primary share configuration
if ! grep -q "\[Primary\]" /etc/samba/smb.conf; then
cat >> /etc/samba/smb.conf << SAMBA_CONFIG
# Primary drive share - added by post-install script
[Primary]
comment = Primary Drive
path = $ACTUAL_HOME/drives/primary
browseable = yes
read only = no
writable = yes
valid users = $ACTUAL_USER
create mask = 0775
directory mask = 0775
SAMBA_CONFIG
echo "✓ Added [Primary] share to Samba configuration"
else
echo "Samba [Primary] share already configured, skipping..."
fi
# Add Samba user
echo ""
echo "━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━"
echo "SAMBA PASSWORD SETUP"
echo "━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━"
echo ""
echo "Set a password for Samba file sharing access."
echo "Tip: Using the same password as your system login is convenient."
echo ""
smbpasswd -a "$ACTUAL_USER"
# Enable and restart Samba services
systemctl enable smbd nmbd || echo "Warning: Failed to enable Samba services"
systemctl restart smbd nmbd || echo "Warning: Failed to restart Samba services"
echo ""
echo "✓ Samba configured successfully"
echo " Share name: Primary"
echo " Path: $ACTUAL_HOME/drives/primary"
echo " Access: \\\\$(hostname)\\Primary (Windows) or smb://$(hostname)/Primary (Mac/Linux)"
else
echo "✗ Samba installation failed, skipping configuration"
fi
else
echo "Skipping Samba installation."
fi
# NetBird Installation
echo ""
echo "━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━"
echo "NETBIRD MESH VPN (Optional)"
echo "━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━"
echo ""
echo "NetBird is a secure mesh VPN for connecting devices across networks."
echo ""
INSTALL_NETBIRD="y"
if is_netbird_installed; then
echo "NetBird is already installed."
netbird status 2>/dev/null || true
echo ""
read -p "Reinstall NetBird? (y/n): " INSTALL_NETBIRD
else
read -p "Install NetBird? (y/n): " INSTALL_NETBIRD
fi
if [ "$INSTALL_NETBIRD" = "y" ] || [ "$INSTALL_NETBIRD" = "Y" ]; then
echo ""
echo "Installing NetBird..."
echo " - NetBird: Secure mesh VPN for connecting devices"
echo ""
curl -fsSL https://pkgs.netbird.io/install.sh | sh || echo "Warning: NetBird installation failed, continuing..."
echo ""
echo "NetBird installed. Setup instructions:"
echo " 1. Create account at https://app.netbird.io (or self-host)"
echo " 2. Run 'netbird up' and authenticate via browser"
echo ""
echo "For NetBird SSH functionality:"
echo " • Enable SSH in NetBird dashboard settings"
echo " • Use 'netbird ssh <peer-name>' to connect to peers"
echo " • NetBird manages SSH keys automatically when using 'netbird ssh'"
echo " • Traditional SSH also works using peer IPs from 'netbird status'"
echo " • Configure ACL rules in dashboard for SSH access (port 22)"
echo ""
else
echo "Skipping NetBird installation."
fi
# RustDesk Installation
echo ""
echo "━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━"
echo "RUSTDESK REMOTE DESKTOP (Optional)"
echo "━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━"
echo ""
echo "RustDesk is an open-source remote desktop software."
echo ""
INSTALL_RUSTDESK="y"
if is_rustdesk_installed; then
echo "RustDesk is already installed."
echo ""
read -p "Reinstall RustDesk? (y/n): " INSTALL_RUSTDESK
else
read -p "Install RustDesk? (y/n): " INSTALL_RUSTDESK
fi
if [ "$INSTALL_RUSTDESK" = "y" ] || [ "$INSTALL_RUSTDESK" = "Y" ]; then
echo ""
echo "Installing RustDesk..."
echo " - RustDesk: Open-source remote desktop software"
echo ""
# Download latest RustDesk .deb package
RUSTDESK_VERSION=$(curl -s https://api.github.com/repos/rustdesk/rustdesk/releases/latest | grep -oP '"tag_name": "\K(.*)(?=")')
RUSTDESK_URL="https://github.com/rustdesk/rustdesk/releases/download/${RUSTDESK_VERSION}/rustdesk-${RUSTDESK_VERSION}-x86_64.deb"
wget -O /tmp/rustdesk.deb "$RUSTDESK_URL" || echo "Warning: RustDesk download failed, continuing..."
if [ -f /tmp/rustdesk.deb ]; then
apt install -y /tmp/rustdesk.deb || echo "Warning: RustDesk installation failed, continuing..."
rm /tmp/rustdesk.deb
echo "✓ RustDesk installed"
fi
else
echo "Skipping RustDesk installation."
fi
# Backup System (Optional)
echo ""
echo "━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━"
echo "BACKUP SYSTEM (Optional)"
echo "━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━"
echo ""
echo "This sets up an automated backup system for local drives."
echo ""
# Check if backup is already configured
BACKUP_CONFIGURED=false
if [ -f /usr/local/bin/backup-scripts/rclone-backup.sh ] || [ -f /usr/local/bin/backup-scripts/rsync-backup.sh ]; then
BACKUP_CONFIGURED=true
echo "Backup system is already configured."
if [ -f /usr/local/bin/backup-scripts/rclone-backup.sh ]; then
echo " Current: rclone backup script"
fi
if [ -f /usr/local/bin/backup-scripts/rsync-backup.sh ]; then
echo " Current: rsync backup script"
fi
echo ""
read -p "Reconfigure backup system? (y/n): " SETUP_BACKUP
else
read -p "Set up backup system? (y/n): " SETUP_BACKUP
fi
if [ "$SETUP_BACKUP" = "y" ] || [ "$SETUP_BACKUP" = "Y" ]; then
echo ""
echo "━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━"
echo "BACKUP TOOL SELECTION"
echo "━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━"
echo ""
echo "Choose your backup tool:"
echo ""
echo " [1] rsync - RECOMMENDED for local drive backups"
echo " • Delta transfers (only changed bytes are copied)"
echo " • Faster incremental backups"
echo " • Built into most Linux systems"
echo ""
echo " [2] rclone - Better for cloud storage backups"
echo " • Supports 40+ cloud providers (S3, GDrive, Dropbox...)"
echo " • File-level sync (copies entire changed files)"
echo " • Good for local drives, but rsync is more efficient"
echo ""
read -p "Select backup tool [1=rsync, 2=rclone]: " BACKUP_TOOL_CHOICE
if [ "$BACKUP_TOOL_CHOICE" = "2" ]; then
BACKUP_TOOL="rclone"
else
BACKUP_TOOL="rsync"
fi
echo ""
echo "━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━"
echo "BACKUP MODE SELECTION"
echo "━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━"
echo ""
echo "Choose your backup mode:"
echo ""
echo " [1] FULL BACKUP - Mirror entire primary drive to one backup drive"
echo " • Simpler setup (primary → backup1)"
echo " • Requires: backup drive >= primary drive size"
echo " • Example: 4TB primary → 4TB+ backup"
echo ""
echo " [2] SPLIT BACKUP - Divide data between two smaller backup drives"
echo " • Useful when: Primary > each backup drive"
echo " • Example: 4TB primary → 2TB backup1 + 2TB backup2"
echo " • You configure which folders go to which backup"
echo ""
read -p "Select backup mode [1=full, 2=split]: " BACKUP_MODE_CHOICE
if [ "$BACKUP_MODE_CHOICE" = "2" ]; then
BACKUP_MODE="split"
else
BACKUP_MODE="full"
fi
echo ""
echo "Selected: $BACKUP_TOOL with $BACKUP_MODE backup mode"
echo ""
echo "Setting up backup configuration..."
echo ""
# Install the selected backup tool if needed
if [ "$BACKUP_TOOL" = "rsync" ]; then
if ! is_rsync_installed; then
apt install -y rsync || echo "Warning: rsync installation failed"
fi
else
if ! is_rclone_installed; then
apt install -y rclone || echo "Warning: rclone installation failed"
fi
fi
# Create backup script directory
mkdir -p /usr/local/bin/backup-scripts
# Create mount point directories based on mode
echo ""
echo "Creating mount point directories in $ACTUAL_HOME/drives/..."
mkdir -p "$ACTUAL_HOME/drives/primary"
mkdir -p "$ACTUAL_HOME/drives/backup1"
if [ "$BACKUP_MODE" = "split" ]; then
mkdir -p "$ACTUAL_HOME/drives/backup2"
fi
chown -R "$ACTUAL_USER:$ACTUAL_USER" "$ACTUAL_HOME/drives"
echo ""
echo "━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━"
echo "DRIVE SETUP - Mount your drives"
echo "━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━"
echo ""
echo "Available block devices:"
echo ""
lsblk -o NAME,SIZE,TYPE,FSTYPE,MOUNTPOINT,LABEL
echo ""
read -p "Do you want to mount drives now? (y/n): " MOUNT_NOW
if [ "$MOUNT_NOW" = "y" ] || [ "$MOUNT_NOW" = "Y" ]; then
echo ""
echo "Enter device paths (e.g., /dev/sdb1) or leave blank to skip"
echo ""
read -p "Primary drive device (e.g., /dev/sdb1): " PRIMARY_DEV
read -p "Backup1 drive device (e.g., /dev/sdc1): " BACKUP1_DEV
if [ "$BACKUP_MODE" = "split" ]; then
read -p "Backup2 drive device (e.g., /dev/sdd1): " BACKUP2_DEV
fi
# Mount primary
if [ -n "$PRIMARY_DEV" ] && [ -b "$PRIMARY_DEV" ]; then
echo "Mounting $PRIMARY_DEV to $ACTUAL_HOME/drives/primary..."
mount "$PRIMARY_DEV" "$ACTUAL_HOME/drives/primary" && echo "✓ Primary mounted" || echo "✗ Failed to mount primary"
fi
# Mount backup1
if [ -n "$BACKUP1_DEV" ] && [ -b "$BACKUP1_DEV" ]; then
echo "Mounting $BACKUP1_DEV to $ACTUAL_HOME/drives/backup1..."
mount "$BACKUP1_DEV" "$ACTUAL_HOME/drives/backup1" && echo "✓ Backup1 mounted" || echo "✗ Failed to mount backup1"
fi
# Mount backup2 (only in split mode)
if [ "$BACKUP_MODE" = "split" ] && [ -n "$BACKUP2_DEV" ] && [ -b "$BACKUP2_DEV" ]; then
echo "Mounting $BACKUP2_DEV to $ACTUAL_HOME/drives/backup2..."
mount "$BACKUP2_DEV" "$ACTUAL_HOME/drives/backup2" && echo "✓ Backup2 mounted" || echo "✗ Failed to mount backup2"
fi
echo ""
echo "Current mounts:"
df -h | grep "$ACTUAL_HOME/drives"
echo ""
read -p "Add these mounts to /etc/fstab for automatic mounting at boot? (y/n): " ADD_FSTAB
if [ "$ADD_FSTAB" = "y" ] || [ "$ADD_FSTAB" = "Y" ]; then
echo ""
echo "Adding entries to /etc/fstab..."
cp /etc/fstab /etc/fstab.backup-$(date +%Y%m%d-%H%M%S)
if [ -n "$PRIMARY_DEV" ] && [ -b "$PRIMARY_DEV" ]; then
PRIMARY_UUID=$(blkid -s UUID -o value "$PRIMARY_DEV")
if [ -n "$PRIMARY_UUID" ]; then
echo "UUID=$PRIMARY_UUID $ACTUAL_HOME/drives/primary auto defaults 0 2" >> /etc/fstab
echo "✓ Added primary to fstab"
fi
fi
if [ -n "$BACKUP1_DEV" ] && [ -b "$BACKUP1_DEV" ]; then
BACKUP1_UUID=$(blkid -s UUID -o value "$BACKUP1_DEV")
if [ -n "$BACKUP1_UUID" ]; then
echo "UUID=$BACKUP1_UUID $ACTUAL_HOME/drives/backup1 auto defaults 0 2" >> /etc/fstab
echo "✓ Added backup1 to fstab"
fi
fi
if [ "$BACKUP_MODE" = "split" ] && [ -n "$BACKUP2_DEV" ] && [ -b "$BACKUP2_DEV" ]; then
BACKUP2_UUID=$(blkid -s UUID -o value "$BACKUP2_DEV")
if [ -n "$BACKUP2_UUID" ]; then
echo "UUID=$BACKUP2_UUID $ACTUAL_HOME/drives/backup2 auto defaults 0 2" >> /etc/fstab
echo "✓ Added backup2 to fstab"
fi
fi
echo "✓ Backup of original fstab saved with timestamp"
fi
else
echo ""
echo "Skipping drive mounting. You can mount manually later."
echo "Mount points created at:"
echo " $ACTUAL_HOME/drives/primary"
echo " $ACTUAL_HOME/drives/backup1"
if [ "$BACKUP_MODE" = "split" ]; then
echo " $ACTUAL_HOME/drives/backup2"
fi
fi
# Create backup script based on selected tool and mode
SCRIPT_NAME="${BACKUP_TOOL}-backup.sh"
if [ "$BACKUP_TOOL" = "rsync" ] && [ "$BACKUP_MODE" = "full" ]; then
# RSYNC FULL BACKUP
cat > /usr/local/bin/backup-scripts/$SCRIPT_NAME << BACKUP_SCRIPT
#!/bin/bash
################################################################################
# rsync FULL Backup Script - Mirror entire primary to backup drive
################################################################################
# Tool: rsync (delta transfers - only changed bytes are copied)
# Mode: Full backup (entire primary → backup1)
################################################################################
PRIMARY="$ACTUAL_HOME/drives/primary"
BACKUP1="$ACTUAL_HOME/drives/backup1"
LOG="/var/log/rsync-backup.log"
echo "=== rsync FULL Backup Started: \$(date) ===" | tee -a "\$LOG"
echo "FROM: \$PRIMARY" | tee -a "\$LOG"
echo "TO: \$BACKUP1" | tee -a "\$LOG"
echo "" | tee -a "\$LOG"
if [ ! -d "\$PRIMARY" ]; then
echo "ERROR: Primary drive not mounted at \$PRIMARY" | tee -a "\$LOG"
exit 1
fi
if [ ! -d "\$BACKUP1" ]; then
echo "ERROR: Backup drive not mounted at \$BACKUP1" | tee -a "\$LOG"
exit 1
fi
# rsync options:
# -a = archive mode (preserves permissions, timestamps, etc.)
# -v = verbose
# -h = human-readable sizes
# --delete = remove files from backup that don't exist on primary
# --progress = show progress
# --stats = show transfer statistics
rsync -avh --delete --progress --stats "\$PRIMARY/" "\$BACKUP1/" 2>&1 | tee -a "\$LOG"
if [ \$? -eq 0 ]; then
echo "" | tee -a "\$LOG"
echo "✓ Backup completed successfully: \$(date)" | tee -a "\$LOG"
else
echo "" | tee -a "\$LOG"
echo "✗ Backup failed: \$(date)" | tee -a "\$LOG"
fi
BACKUP_SCRIPT
elif [ "$BACKUP_TOOL" = "rsync" ] && [ "$BACKUP_MODE" = "split" ]; then
# RSYNC SPLIT BACKUP
cat > /usr/local/bin/backup-scripts/$SCRIPT_NAME << BACKUP_SCRIPT
#!/bin/bash
################################################################################
# rsync SPLIT Backup Script - Divide data between two backup drives
################################################################################
# Tool: rsync (delta transfers - only changed bytes are copied)
# Mode: Split backup (folders divided between backup1 and backup2)
#
# CONFIGURE: Edit BACKUP1_DIRS and BACKUP2_DIRS below
################################################################################
PRIMARY="$ACTUAL_HOME/drives/primary"
BACKUP1="$ACTUAL_HOME/drives/backup1"
BACKUP2="$ACTUAL_HOME/drives/backup2"
LOG="/var/log/rsync-backup.log"
# ⚠️ CONFIGURE: Which folders go to which backup drive
# Check folder sizes: du -sh $ACTUAL_HOME/drives/primary/*
BACKUP1_DIRS=(
"documents"
"work"
"photos"
)
BACKUP2_DIRS=(
"videos"
"music"
"downloads"
)
echo "=== rsync SPLIT Backup Started: \$(date) ===" | tee -a "\$LOG"
echo "PRIMARY: \$PRIMARY" | tee -a "\$LOG"
echo "" | tee -a "\$LOG"
backup_to_drive() {
local dest=\$1
local drive_name=\$2
shift 2
local dirs_array=("\$@")
if [ ! -d "\$dest" ]; then
echo "⚠️ WARNING: \$drive_name (\$dest) not mounted, skipping" | tee -a "\$LOG"
return 1
fi
echo "━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━" | tee -a "\$LOG"
echo "DESTINATION: \$drive_name (\$dest)" | tee -a "\$LOG"
echo "━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━" | tee -a "\$LOG"
for dir in "\${dirs_array[@]}"; do
if [ ! -d "\$PRIMARY/\$dir" ]; then
echo " ⚠️ WARNING: \$PRIMARY/\$dir does not exist, skipping" | tee -a "\$LOG"
continue
fi
echo "" | tee -a "\$LOG"
echo " Syncing: \$dir → \$dest/\$dir" | tee -a "\$LOG"
rsync -avh --delete --progress "\$PRIMARY/\$dir/" "\$dest/\$dir/" 2>&1 | tee -a "\$LOG"
if [ \$? -eq 0 ]; then
echo " ✓ \$dir synced successfully" | tee -a "\$LOG"
else
echo " ✗ \$dir sync FAILED" | tee -a "\$LOG"
fi
done
}
backup_to_drive "\$BACKUP1" "Backup Drive 1" "\${BACKUP1_DIRS[@]}"
backup_to_drive "\$BACKUP2" "Backup Drive 2" "\${BACKUP2_DIRS[@]}"
echo "" | tee -a "\$LOG"
echo "=== Backup Completed: \$(date) ===" | tee -a "\$LOG"
BACKUP_SCRIPT
elif [ "$BACKUP_TOOL" = "rclone" ] && [ "$BACKUP_MODE" = "full" ]; then
# RCLONE FULL BACKUP
cat > /usr/local/bin/backup-scripts/$SCRIPT_NAME << BACKUP_SCRIPT
#!/bin/bash
################################################################################
# rclone FULL Backup Script - Mirror entire primary to backup drive
################################################################################
# Tool: rclone (file-level sync, great for cloud storage)
# Mode: Full backup (entire primary → backup1)
################################################################################
PRIMARY="$ACTUAL_HOME/drives/primary"
BACKUP1="$ACTUAL_HOME/drives/backup1"
LOG="/var/log/rclone-backup.log"
echo "=== rclone FULL Backup Started: \$(date) ===" | tee -a "\$LOG"
echo "FROM: \$PRIMARY" | tee -a "\$LOG"
echo "TO: \$BACKUP1" | tee -a "\$LOG"
echo "" | tee -a "\$LOG"
if [ ! -d "\$PRIMARY" ]; then
echo "ERROR: Primary drive not mounted at \$PRIMARY" | tee -a "\$LOG"
exit 1
fi
if [ ! -d "\$BACKUP1" ]; then
echo "ERROR: Backup drive not mounted at \$BACKUP1" | tee -a "\$LOG"
exit 1
fi
# rclone sync: one-way sync from source to destination
rclone sync "\$PRIMARY" "\$BACKUP1" \\
--checksum \\
--verbose \\
--progress \\
--stats=30s \\
--log-file="\$LOG"
if [ \$? -eq 0 ]; then
echo "" | tee -a "\$LOG"
echo "✓ Backup completed successfully: \$(date)" | tee -a "\$LOG"
else
echo "" | tee -a "\$LOG"
echo "✗ Backup failed: \$(date)" | tee -a "\$LOG"
fi
BACKUP_SCRIPT
else
# RCLONE SPLIT BACKUP (default)
cat > /usr/local/bin/backup-scripts/$SCRIPT_NAME << BACKUP_SCRIPT
#!/bin/bash
################################################################################
# rclone SPLIT Backup Script - Divide data between two backup drives
################################################################################
# Tool: rclone (file-level sync, great for cloud storage)
# Mode: Split backup (folders divided between backup1 and backup2)
#
# CONFIGURE: Edit BACKUP1_DIRS and BACKUP2_DIRS below
################################################################################
PRIMARY="$ACTUAL_HOME/drives/primary"
BACKUP1="$ACTUAL_HOME/drives/backup1"
BACKUP2="$ACTUAL_HOME/drives/backup2"
LOG="/var/log/rclone-backup.log"
# ⚠️ CONFIGURE: Which folders go to which backup drive
# Check folder sizes: du -sh $ACTUAL_HOME/drives/primary/*
BACKUP1_DIRS=(
"documents"
"work"
"photos"
)
BACKUP2_DIRS=(
"videos"
"music"
"downloads"
)
echo "=== rclone SPLIT Backup Started: \$(date) ===" | tee -a "\$LOG"
echo "PRIMARY: \$PRIMARY" | tee -a "\$LOG"
echo "" | tee -a "\$LOG"
backup_to_drive() {
local dest=\$1
local drive_name=\$2
shift 2
local dirs_array=("\$@")
if [ ! -d "\$dest" ]; then
echo "⚠️ WARNING: \$drive_name (\$dest) not mounted, skipping" | tee -a "\$LOG"
return 1
fi
echo "━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━" | tee -a "\$LOG"
echo "DESTINATION: \$drive_name (\$dest)" | tee -a "\$LOG"
echo "━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━" | tee -a "\$LOG"
for dir in "\${dirs_array[@]}"; do
if [ ! -d "\$PRIMARY/\$dir" ]; then
echo " ⚠️ WARNING: \$PRIMARY/\$dir does not exist, skipping" | tee -a "\$LOG"
continue
fi
echo "" | tee -a "\$LOG"
echo " Syncing: \$dir → \$dest/\$dir" | tee -a "\$LOG"
rclone sync "\$PRIMARY/\$dir" "\$dest/\$dir" \\
--checksum \\
--verbose \\
--progress \\
--stats=30s \\
--log-file="\$LOG"
if [ \$? -eq 0 ]; then
echo " ✓ \$dir synced successfully" | tee -a "\$LOG"
else
echo " ✗ \$dir sync FAILED" | tee -a "\$LOG"
fi
done
}
backup_to_drive "\$BACKUP1" "Backup Drive 1" "\${BACKUP1_DIRS[@]}"
backup_to_drive "\$BACKUP2" "Backup Drive 2" "\${BACKUP2_DIRS[@]}"
echo "" | tee -a "\$LOG"
echo "=== Backup Completed: \$(date) ===" | tee -a "\$LOG"
BACKUP_SCRIPT
fi
chmod +x /usr/local/bin/backup-scripts/$SCRIPT_NAME
# Create systemd service for automatic backups
cat > /etc/systemd/system/${BACKUP_TOOL}-backup.service << SERVICE
[Unit]
Description=${BACKUP_TOOL} Backup Service
After=network.target
[Service]
Type=oneshot
ExecStart=/usr/local/bin/backup-scripts/${SCRIPT_NAME}
User=root
SERVICE
# Create systemd timer for daily backups at 2 AM
cat > /etc/systemd/system/${BACKUP_TOOL}-backup.timer << TIMER
[Unit]
Description=Daily ${BACKUP_TOOL} Backup Timer
Requires=${BACKUP_TOOL}-backup.service
[Timer]
OnCalendar=*-*-* 02:00:00
Persistent=true
[Install]
WantedBy=timers.target
TIMER
echo ""
echo "✓ Backup script created: /usr/local/bin/backup-scripts/$SCRIPT_NAME"
echo "✓ Systemd service/timer created (disabled by default)"
echo ""
echo "Configuration: $BACKUP_TOOL + $BACKUP_MODE mode"
if [ "$BACKUP_MODE" = "split" ]; then
echo ""
echo "⚠️ IMPORTANT: Edit the backup script to configure which folders"
echo " go to which backup drive before running!"
echo ""
echo " sudo nano /usr/local/bin/backup-scripts/$SCRIPT_NAME"
fi
else
echo "Skipping backup system setup."
fi
# Full system upgrade
echo ""
echo "Performing full system upgrade..."
apt upgrade -y
# Clean up
echo ""
echo "Cleaning up..."
apt autoremove -y
apt autoclean
echo ""
echo "=== Installation Complete! ==="
echo ""
echo "Installed Software:"
echo " ✓ net-tools, ncdu, git, curl, wget, vim, htop, tree, zip/unzip"
echo " ✓ OpenSSH Server - SSH remote access"
if [ "$INSTALL_DOCKER" = "y" ] || [ "$INSTALL_DOCKER" = "Y" ]; then
echo " ✓ Docker Engine + Docker Compose"
fi
if [ "$INSTALL_SAMBA" = "y" ] || [ "$INSTALL_SAMBA" = "Y" ]; then
echo " ✓ Samba - File sharing (Primary drive shared)"
fi
if [ "$INSTALL_NETBIRD" = "y" ] || [ "$INSTALL_NETBIRD" = "Y" ]; then
echo " ✓ NetBird - Mesh VPN"
fi
if [ "$INSTALL_RUSTDESK" = "y" ] || [ "$INSTALL_RUSTDESK" = "Y" ]; then
echo " ✓ RustDesk - Remote desktop"
fi
if [ "$SETUP_BACKUP" = "y" ] || [ "$SETUP_BACKUP" = "Y" ]; then
echo " ✓ Backup system configured: $BACKUP_TOOL ($BACKUP_MODE mode)"
fi
echo ""
echo "━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━"
echo "SSH AUTHENTICATION SETUP"
echo "━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━"
echo ""
echo " SSH Key for This Computer:"
if [ "$GENERATE_KEY" = "y" ] || [ "$GENERATE_KEY" = "Y" ]; then
if [ -f "$ACTUAL_HOME/.ssh/id_rsa.pub" ]; then
echo " ✓ 4096-bit RSA key generated"
echo " Public key: $ACTUAL_HOME/.ssh/id_rsa.pub"
echo " View with: cat ~/.ssh/id_rsa.pub"
else
echo " ✗ Key generation was attempted but may have failed"
fi
else
echo " Not generated (skipped during install)"
echo " Generate later: ssh-keygen -t rsa -b 4096 -C \"your@email.com\""
fi
echo ""
echo " SSH Server Status:"
if [ "$KEYS_IMPORTED" = true ]; then
echo " Password authentication: DISABLED (key-only access)"
echo " Imported SSH keys: ~/.ssh/authorized_keys"
else
echo " Password authentication: ENABLED"
fi
echo ""
echo " Traditional SSH Access:"
echo " - Uses keys from GitHub/Launchpad (if imported)"
echo " - Connect with: ssh user@hostname"
if [ "$KEYS_IMPORTED" = true ]; then
echo " - Password login: DISABLED (keys required)"
else
echo " - Password login: ENABLED"
fi
echo ""
echo " NetBird SSH Access (independent of traditional SSH):"
echo " - NetBird manages its own keys automatically"
echo " - Works even with password auth disabled"
echo " - Connect with: netbird ssh <peer-name>"
echo " - Enable in NetBird dashboard first"
echo ""
echo " You can use ANY combination:"
echo " ✓ GitHub + Launchpad + NetBird SSH"
echo " ✓ GitHub + NetBird SSH"
echo " ✓ Launchpad + NetBird SSH"
echo " ✓ GitHub + Launchpad (no NetBird)"
echo " ✓ Just GitHub or just Launchpad"
echo " ✓ Just NetBird SSH"
echo " ✓ None (password auth only - if no keys imported)"
echo ""
if [ "$SETUP_BACKUP" = "y" ] || [ "$SETUP_BACKUP" = "Y" ]; then
echo "━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━"
echo "BACKUP SYSTEM - $BACKUP_TOOL ($BACKUP_MODE mode)"
echo "━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━"
echo ""
echo " Mount points:"
echo " $ACTUAL_HOME/drives/primary"
echo " $ACTUAL_HOME/drives/backup1"
if [ "$BACKUP_MODE" = "split" ]; then
echo " $ACTUAL_HOME/drives/backup2"
fi
echo ""
echo " Backup script: /usr/local/bin/backup-scripts/${BACKUP_TOOL}-backup.sh"
echo " Log file: /var/log/${BACKUP_TOOL}-backup.log"
echo ""
if [ "$BACKUP_MODE" = "split" ]; then
echo " ⚠️ CONFIGURE BEFORE RUNNING:"
echo " Edit the script to set which folders go to which backup drive."
echo " sudo nano /usr/local/bin/backup-scripts/${BACKUP_TOOL}-backup.sh"
echo ""
fi
echo " Quick start:"
echo " 1. Test (dry-run): sudo ${BACKUP_TOOL}-backup.sh --dry-run # (edit script first)"
echo " 2. Run manually: sudo /usr/local/bin/backup-scripts/${BACKUP_TOOL}-backup.sh"
echo " 3. Enable auto: sudo systemctl enable ${BACKUP_TOOL}-backup.timer"
echo " sudo systemctl start ${BACKUP_TOOL}-backup.timer"
echo ""
echo " Monitor: tail -f /var/log/${BACKUP_TOOL}-backup.log"
fi
echo "━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━"
echo "OTHER IMPORTANT NOTES"
echo "━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━"
echo ""
if [ "$INSTALL_SAMBA" = "y" ] || [ "$INSTALL_SAMBA" = "Y" ]; then
echo " Samba File Sharing:"
if command -v smbd &> /dev/null && grep -q "\[Primary\]" /etc/samba/smb.conf 2>/dev/null; then
echo " ✓ Share 'Primary' is accessible at:"
echo " Windows: \\\\$(hostname)\\Primary"
echo " Mac/Linux: smb://$(hostname)/Primary"
echo " • Username: $ACTUAL_USER"
echo " • Use the Samba password you just set"
echo ""
else
echo " ✗ Installation may have failed - check 'systemctl status smbd'"
echo ""
fi
fi
if [ "$INSTALL_DOCKER" = "y" ] || [ "$INSTALL_DOCKER" = "Y" ]; then
echo " Docker: Log out and back in for group membership to take effect"
echo ""
fi
if [ "$INSTALL_NETBIRD" = "y" ] || [ "$INSTALL_NETBIRD" = "Y" ]; then
echo " NetBird:"
echo " 1. Run 'netbird up' (opens browser for authentication)"
echo " 2. View connected peers: netbird status"
echo " 3. Configure ACLs in dashboard: https://app.netbird.io"
echo ""
fi
if [ "$INSTALL_RUSTDESK" = "y" ] || [ "$INSTALL_RUSTDESK" = "Y" ]; then
echo " RustDesk: Launch from applications menu or run 'rustdesk'"
echo ""
fi
Reference in New Issue View Git Blame Copy Permalink