Claude
2d9501a56c
Errno 79 is ELIBACC ("Can not access a needed shared library"), not
ENOKEY as previously assumed — mount.cifs prints glibc's literal
strerror() text for it. It recurred with valid, correctly-captured
credentials because the real cause was never authentication: cifs-utils
hard-depends on the libkeyutils1 library but only Recommends the
keyutils package itself, which ships /sbin/request-key and the
/etc/request-key.d/*.conf handlers the kernel's upcall path invokes.
Minimal cloud VPS images commonly disable install-recommends, so
`apt-get install cifs-utils` alone silently skips it and every mount —
guest or fully credentialed — fails identically.
Install keyutils explicitly wherever cifs-utils is installed:
services/base.sh's unconditional package list, vpn-data-mount.sh's
lazy install-on-mount path, and tools/mount-network-drive.sh's SMB
branch.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01H4k6J1qXXyYxhGEgnJaMvn
566 lines
25 KiB
Bash
566 lines
25 KiB
Bash
#!/bin/bash
|
|
# services/vpn-data-mount.sh — mount existing SMB shares from a
|
|
# NetBird-connected home box, with SSH-key bootstrap automated.
|
|
# Part of the modular post-install system (sourced by setup.sh).
|
|
#
|
|
# Can also be run standalone on any machine:
|
|
# sudo bash vpn-data-mount.sh
|
|
# (No Docker needed — this only touches SSH and /etc/fstab)
|
|
#
|
|
# Unlike most services here, this is repeatable by design: different
|
|
# services can have data on different home boxes, so this asks for a home
|
|
# box IP every time and can be re-run any number of times, once per
|
|
# home-box you want to pull shares from. It's the multi-instance pattern
|
|
# from CLAUDE.md generalized from "N instances of one app" to "N
|
|
# independent mounts" — there's no single install directory to gate on, so
|
|
# state lives in /etc/fstab itself (tagged entries), same as
|
|
# tools/mount-network-drive.sh.
|
|
#
|
|
# Deliberately READ-ONLY on the home box's Samba config — this tool never
|
|
# writes to smb.conf, never installs Samba, never creates or resets a
|
|
# Samba account there. It only (a) bootstraps passwordless SSH if needed,
|
|
# then (b) reads the home box's existing smb.conf over that SSH connection
|
|
# to list whatever shares are already configured there, so you can pick
|
|
# one or more to mount. Set up the actual share(s) on the home box
|
|
# yourself, the normal way (or with tools/mount-network-drive.sh's own
|
|
# guided flow, run there). An earlier version of this tried to fully
|
|
# provision Samba remotely too — reversed per direct request, and it had
|
|
# also caused real damage in practice (a section-removal bug that deleted
|
|
# unrelated shares on a real box) that a read-only tool can't repeat.
|
|
#
|
|
# Assumes the home box is Linux and reachable over a NetBird IP — this repo
|
|
# doesn't set up the home box's side of NetBird (that's a separate machine,
|
|
# possibly not running this repo at all).
|
|
#
|
|
# SMB chosen over NFS/SSHFS deliberately: NFS is marginally faster for
|
|
# Linux-to-Linux but SMB isn't a "huge" difference for normal use (media,
|
|
# docs, moderate datasets — the gap shows up mainly on many-small-files
|
|
# workloads). SSHFS was ruled out because the VPN tunnel already encrypts
|
|
# everything — SSHFS's own SSH-layer encryption on top of that is pure
|
|
# redundant overhead for no added security, and it's the slowest and least
|
|
# robust (FUSE reconnect quirks) of the three for an always-on mount.
|
|
#
|
|
# Mounts use real Samba credentials (a username/password you provide for
|
|
# an account that already exists on the home box), stored locally in a
|
|
# root-only credentials file, same convention tools/mount-network-drive.sh
|
|
# already uses — never guest access.
|
|
#
|
|
# "mount error(79): Can not access a needed shared library" is NOT a
|
|
# credentials problem, guest-vs-authenticated problem, or a mislabeled
|
|
# ENOKEY — errno 79 is literally ELIBACC, and mount.cifs prints glibc's
|
|
# literal strerror() text for it. Confirmed live: this recurred identically
|
|
# with a real Samba account and a verified, correctly-captured password
|
|
# (see the read()/IFS note above — that was a real bug too, just not this
|
|
# one). Root cause is the `keyutils` package being missing on the client
|
|
# (VPS) side: mount.cifs dlopen()s libkeyutils.so.1 at runtime for the
|
|
# upcall path (idmapping/SPNEGO), and while cifs-utils hard-depends on the
|
|
# libkeyutils1 *library*, the keyutils *package* — which ships
|
|
# /sbin/request-key and the /etc/request-key.d/*.conf handler
|
|
# registrations the kernel's upcall actually invokes — is only a Recommends.
|
|
# Plenty of minimal cloud VPS images (unlike a typical desktop/full-server
|
|
# install) turn off APT's install-recommends, so `apt-get install
|
|
# cifs-utils` alone silently skips it and every mount — guest or fully
|
|
# credentialed — fails the same way. Install `keyutils` explicitly instead
|
|
# of relying on it riding along.
|
|
|
|
# ── Standalone bootstrap ──────────────────────────────────────────────────────
|
|
if [[ "${BASH_SOURCE[0]}" == "${0}" ]]; then
|
|
[[ "$(id -u)" == "0" ]] || { echo "Run with sudo: sudo bash $0"; exit 1; }
|
|
|
|
_SELF_DIR="$(cd "$(dirname "${BASH_SOURCE[0]}")" && pwd)"
|
|
_COMMON="$_SELF_DIR/../lib/common.sh"
|
|
|
|
if [[ -f "$_COMMON" ]]; then
|
|
# shellcheck source=../lib/common.sh
|
|
source "$_COMMON"
|
|
else
|
|
log_info() { echo -e "\033[0;34m[INFO]\033[0m $*"; }
|
|
log_success() { echo -e "\033[0;32m[OK]\033[0m $*"; }
|
|
log_warning() { echo -e "\033[1;33m[WARN]\033[0m $*"; }
|
|
log_error() { echo -e "\033[0;31m[ERROR]\033[0m $*" >&2; }
|
|
|
|
prompt_text() {
|
|
local _q="$1" _def="$2" _var="$3" _r
|
|
[[ "${UNATTENDED:-false}" == "true" ]] && { eval "$_var='$_def'"; return; }
|
|
read -r -p " $_q " _r
|
|
eval "$_var='${_r:-$_def}'"
|
|
}
|
|
|
|
prompt_yn() {
|
|
local _q="$1" _def="$2" _var="$3" _r
|
|
[[ "${UNATTENDED:-false}" == "true" ]] && { eval "$_var='$_def'"; return; }
|
|
read -r -p " $_q " _r
|
|
eval "$_var='${_r:-$_def}'"
|
|
}
|
|
|
|
register_service() { :; }
|
|
fi
|
|
|
|
ACTUAL_USER="${ACTUAL_USER:-${SUDO_USER:-$USER}}"
|
|
ACTUAL_HOME="$(getent passwd "$ACTUAL_USER" 2>/dev/null | cut -d: -f6 || echo "${HOME:-/root}")"
|
|
DRY_RUN="${DRY_RUN:-false}"
|
|
UNATTENDED="${UNATTENDED:-false}"
|
|
|
|
_RUN_STANDALONE=1
|
|
fi
|
|
# ─────────────────────────────────────────────────────────────────────────────
|
|
|
|
register_service vpn-data-mount homelab "Mount existing SMB shares from a NetBird-connected home box (read-only discovery, SSH-automated key setup)"
|
|
|
|
# ── fstab tagging — the durable record of what this tool has set up ────────
|
|
# Same philosophy as tools/mount-network-drive.sh: /etc/fstab is the single
|
|
# source of truth, no separate state file to drift out of sync with it.
|
|
_VDM_TAG_PREFIX="# vpn-data-mount:"
|
|
|
|
_vdm_list_existing() {
|
|
local entries
|
|
entries="$(grep "^${_VDM_TAG_PREFIX}" /etc/fstab 2>/dev/null || true)"
|
|
if [ -n "$entries" ]; then
|
|
echo ""
|
|
log_info "Already-configured VPN data mounts:"
|
|
echo "$entries" | sed "s|^${_VDM_TAG_PREFIX}| •|"
|
|
echo ""
|
|
fi
|
|
}
|
|
|
|
# ── Name a raw IP so it can be used everywhere instead of typing it again ──
|
|
# Deliberately /etc/hosts, not ~/.ssh/config: an SSH Host alias only helps
|
|
# the `ssh` command itself resolve a name — mount.cifs (and everything
|
|
# else) never consults ~/.ssh/config at all, so an alias alone wouldn't let
|
|
# the actual CIFS mount address use a name. /etc/hosts is the one mechanism
|
|
# that makes a name resolve for both, which is what "use a name instead of
|
|
# the IP" actually needs end to end.
|
|
# Sets RESOLVED_HOST (not local — same out-param convention as elsewhere).
|
|
_vdm_resolve_host() {
|
|
local input="$1"
|
|
RESOLVED_HOST="$input"
|
|
|
|
# Not a raw IP (already a name, whether from /etc/hosts, real DNS, or
|
|
# just typed that way) — nothing to do.
|
|
[[ "$input" =~ ^[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+$ ]] || return 0
|
|
|
|
# Already named from an earlier vpn-data-mount run against this same IP?
|
|
local existing
|
|
existing="$(awk -v ip="$input" '$1==ip && /# vpn-data-mount/ {print $2; exit}' /etc/hosts 2>/dev/null)"
|
|
if [ -n "$existing" ]; then
|
|
log_info "Already named '$existing' in /etc/hosts from an earlier mount — using that."
|
|
RESOLVED_HOST="$existing"
|
|
return 0
|
|
fi
|
|
|
|
local NAME=""
|
|
prompt_text " Name this home box (blank to keep using the IP):" "" NAME
|
|
[ -z "$NAME" ] && return 0
|
|
NAME="$(echo "$NAME" | tr -cs 'a-zA-Z0-9-' '-' | sed 's/^-*//;s/-*$//')"
|
|
[ -z "$NAME" ] && return 0
|
|
|
|
if grep -qE "^\S+[[:space:]]+${NAME}([[:space:]]|\$)" /etc/hosts 2>/dev/null; then
|
|
log_warning "'$NAME' is already used for a different address in /etc/hosts — keeping the IP instead."
|
|
return 0
|
|
fi
|
|
|
|
echo "${input} ${NAME} # vpn-data-mount" >> /etc/hosts
|
|
log_success "Added to /etc/hosts: $NAME -> $input (works for SSH, this mount, and anything else on this box)"
|
|
RESOLVED_HOST="$NAME"
|
|
}
|
|
|
|
# ── SSH trust: test first, only bootstrap if actually needed ──────────────
|
|
# Covers "the home box and VPS already share a key via GitHub import (or any
|
|
# other means)" for free — if it already works, nothing below runs at all.
|
|
_vdm_ssh_works() {
|
|
local user="$1" host="$2"
|
|
# Runs as $ACTUAL_USER, not root (this whole script runs as root) — the
|
|
# SSH key lives in $ACTUAL_HOME/.ssh, so root's own bare `ssh` would look
|
|
# in the wrong home directory entirely and never find it.
|
|
sudo -u "$ACTUAL_USER" ssh -o BatchMode=yes -o ConnectTimeout=5 -o StrictHostKeyChecking=accept-new \
|
|
"${user}@${host}" true 2>/dev/null
|
|
}
|
|
|
|
_vdm_ensure_ssh_trust() {
|
|
local user="$1" host="$2"
|
|
|
|
if _vdm_ssh_works "$user" "$host"; then
|
|
log_success "Passwordless SSH to ${user}@${host} already works — nothing to set up."
|
|
return 0
|
|
fi
|
|
|
|
log_info "No passwordless SSH to ${user}@${host} yet — setting it up."
|
|
|
|
local keyfile="$ACTUAL_HOME/.ssh/id_ed25519"
|
|
if [ ! -f "$keyfile" ]; then
|
|
log_info "No SSH key found at $keyfile — generating one."
|
|
sudo -u "$ACTUAL_USER" mkdir -p "$ACTUAL_HOME/.ssh"
|
|
sudo -u "$ACTUAL_USER" ssh-keygen -t ed25519 -N "" -f "$keyfile" -C "${ACTUAL_USER}@$(hostname)-vpn-data-mount" \
|
|
|| { log_error "Key generation failed."; return 1; }
|
|
chmod 700 "$ACTUAL_HOME/.ssh"
|
|
chmod 600 "$keyfile"
|
|
chmod 644 "${keyfile}.pub"
|
|
fi
|
|
|
|
echo ""
|
|
echo " This box's public key (needs to end up in ${user}'s authorized_keys"
|
|
echo " on the home box, one way or another):"
|
|
echo ""
|
|
sed 's/^/ /' "${keyfile}.pub"
|
|
echo ""
|
|
|
|
while true; do
|
|
echo " How do you want to get it there?"
|
|
echo " 1) Try now with ssh-copy-id (needs password login enabled on the home box)"
|
|
echo " 2) I'll add it myself — paste it into ~/.ssh/authorized_keys there, or add it"
|
|
echo " to your GitHub account and run 'ssh-import-id gh:<user>' on the home box"
|
|
echo " (same mechanism this repo's own base.sh setup uses)"
|
|
echo " 3) Cancel this mount"
|
|
echo ""
|
|
local CHOICE=""
|
|
prompt_text " Choice [1/2/3]:" "1" CHOICE
|
|
case "$CHOICE" in
|
|
1)
|
|
sudo -u "$ACTUAL_USER" ssh-copy-id -i "${keyfile}.pub" "${user}@${host}" \
|
|
|| log_warning "ssh-copy-id failed — password auth may be disabled on the home box. Try option 2."
|
|
;;
|
|
2)
|
|
echo ""
|
|
read -r -p " Press Enter once the key is in place on the home box: " _
|
|
;;
|
|
3|c|C)
|
|
log_info "Cancelled."
|
|
return 1
|
|
;;
|
|
*)
|
|
log_warning "Invalid choice."
|
|
continue
|
|
;;
|
|
esac
|
|
|
|
if _vdm_ssh_works "$user" "$host"; then
|
|
log_success "Passwordless SSH to ${user}@${host} confirmed."
|
|
return 0
|
|
fi
|
|
log_warning "Still can't connect without a password — try again, or cancel."
|
|
done
|
|
}
|
|
|
|
# ── Read-only share discovery ───────────────────────────────────────────────
|
|
# Prints "share_name|path" one per line for every real data share found in
|
|
# the home box's smb.conf (skips [global]/[homes]/[printers]/[print$] —
|
|
# not actual browsable directories). Never writes anything, on either
|
|
# side — see the file header. Tries a plain read first (smb.conf is
|
|
# world-readable on a stock Samba install); falls back to a sudo'd read
|
|
# only if that comes back empty, still read-only either way.
|
|
_vdm_list_remote_shares() {
|
|
local user="$1" host="$2"
|
|
local conf
|
|
conf="$(sudo -u "$ACTUAL_USER" ssh "${user}@${host}" 'cat /etc/samba/smb.conf 2>/dev/null')"
|
|
if [ -z "$conf" ]; then
|
|
conf="$(sudo -u "$ACTUAL_USER" ssh -t "${user}@${host}" 'sudo cat /etc/samba/smb.conf 2>/dev/null' 2>/dev/null)"
|
|
fi
|
|
[ -z "$conf" ] && return 1
|
|
|
|
echo "$conf" | awk '
|
|
function flush() {
|
|
if (sect != "" && path != "" && sect != "global" && sect != "printers" && sect != "print$" && sect != "homes") {
|
|
print sect "|" path
|
|
}
|
|
}
|
|
/^\[/ {
|
|
flush()
|
|
sect = $0
|
|
gsub(/[][]/, "", sect)
|
|
path = ""
|
|
next
|
|
}
|
|
/^[[:space:]]*path[[:space:]]*=/ {
|
|
path = $0
|
|
sub(/^[[:space:]]*path[[:space:]]*=[[:space:]]*/, "", path)
|
|
gsub(/[[:space:]]+$/, "", path)
|
|
}
|
|
END { flush() }
|
|
'
|
|
}
|
|
|
|
# ── Reuse a password already entered for the same user+host ───────────────
|
|
# Prints the password if an earlier mount from this host used the same
|
|
# Samba username, nothing otherwise. No log_* calls in here — this runs
|
|
# inside a caller's $(...) capture, and log_info/log_warning/etc. all
|
|
# write to stdout, which would corrupt it.
|
|
_vdm_find_existing_smb_password() {
|
|
local host="$1" user="$2" label creds_file found_user found_pass
|
|
while IFS= read -r label; do
|
|
[ -z "$label" ] && continue
|
|
creds_file="/etc/samba/credentials.vpn-data-mount-${label}"
|
|
[ -f "$creds_file" ] || continue
|
|
found_user="$(grep '^username=' "$creds_file" | cut -d= -f2-)"
|
|
[ "$found_user" = "$user" ] || continue
|
|
found_pass="$(grep '^password=' "$creds_file" | cut -d= -f2-)"
|
|
[ -n "$found_pass" ] && { printf '%s' "$found_pass"; return 0; }
|
|
done < <(grep -E "^${_VDM_TAG_PREFIX} [^ ]+ — ${host}:" /etc/fstab 2>/dev/null \
|
|
| sed -E "s/^${_VDM_TAG_PREFIX} ([^ ]+) .*/\1/")
|
|
return 1
|
|
}
|
|
|
|
# ── Prompt for a password twice, hidden, matching ──────────────────────────
|
|
# Prints the password on success. No log_* calls — same reason as above;
|
|
# uses plain stderr output instead so it's visible without corrupting a
|
|
# caller's $(...) capture.
|
|
_vdm_prompt_password() {
|
|
local prompt="$1" pw1="" pw2=""
|
|
while true; do
|
|
# IFS= matters here, not just -s/-r: plain `read -r pw1` (no IFS=)
|
|
# silently strips leading/trailing whitespace even into a single
|
|
# variable — confirmed live, a password with a leading/trailing
|
|
# space (copy-pasted from a password manager, a stray keystroke)
|
|
# got quietly trimmed on the way in, so the credentials file ended
|
|
# up holding a DIFFERENT password than the one actually set on the
|
|
# Samba account. That surfaces as a cryptic mount failure, not an
|
|
# obvious "wrong password" — nothing here could tell the two apart.
|
|
echo -n " ${prompt}: " >&2
|
|
IFS= read -r -s pw1; echo "" >&2
|
|
echo -n " Confirm: " >&2
|
|
IFS= read -r -s pw2; echo "" >&2
|
|
if [ -n "$pw1" ] && [ "$pw1" = "$pw2" ]; then
|
|
# Length only, never the password itself — lets you catch a
|
|
# silently-stripped character (or a typo) yourself before the
|
|
# mount attempt fails with an unhelpful error.
|
|
echo " Captured (${#pw1} characters)." >&2
|
|
printf '%s' "$pw1"
|
|
return 0
|
|
fi
|
|
echo " Passwords didn't match or were empty — try again." >&2
|
|
done
|
|
}
|
|
|
|
# ── Local mount + fstab ─────────────────────────────────────────────────────
|
|
_vdm_mount_local() {
|
|
local host="$1" share_name="$2" mount_point="$3" label="$4" smb_user="$5" smb_pass="$6"
|
|
|
|
command -v mount.cifs >/dev/null 2>&1 || apt-get install -y cifs-utils -qq
|
|
# Explicit, not left to cifs-utils' Recommends — see file header on
|
|
# errno 79/ELIBACC. dpkg -s (not command -v: keyutils ships no binary
|
|
# this script calls directly, just the request-key handler files).
|
|
dpkg -s keyutils >/dev/null 2>&1 || apt-get install -y keyutils -qq
|
|
|
|
mkdir -p "$mount_point"
|
|
|
|
# Credentials file, not guest/inline password — root-only, matching
|
|
# tools/mount-network-drive.sh's existing convention for SMB creds.
|
|
local creds_file="/etc/samba/credentials.vpn-data-mount-${label}"
|
|
mkdir -p /etc/samba
|
|
cat > "$creds_file" << CREDS
|
|
username=${smb_user}
|
|
password=${smb_pass}
|
|
CREDS
|
|
chmod 600 "$creds_file"
|
|
chown root:root "$creds_file"
|
|
|
|
# sec=ntlmssp explicitly — see the file header on errno 79/ENOKEY.
|
|
local opts="credentials=${creds_file},sec=ntlmssp,uid=$(id -u "$ACTUAL_USER"),gid=$(id -g "$ACTUAL_USER"),iocharset=utf8,nofail,_netdev"
|
|
local share="//${host}/${share_name}"
|
|
|
|
log_info "Testing mount..."
|
|
if mount -t cifs -o "$opts" "$share" "$mount_point"; then
|
|
log_success "Mounted at $mount_point"
|
|
else
|
|
log_error "Mount failed for [$share_name] — check the username/password and that the home box's share actually allows this account."
|
|
rmdir "$mount_point" 2>/dev/null || true
|
|
rm -f "$creds_file"
|
|
return 1
|
|
fi
|
|
|
|
if grep -qs "$mount_point" /etc/fstab; then
|
|
log_warning "$mount_point already in /etc/fstab — skipping fstab entry."
|
|
return 0
|
|
fi
|
|
local bk="/etc/fstab.backup.$(date +%Y%m%d-%H%M%S)"
|
|
cp /etc/fstab "$bk"
|
|
{
|
|
echo ""
|
|
echo "${_VDM_TAG_PREFIX} ${label} — ${host}:${share_name} -> ${mount_point}"
|
|
printf '%-40s %-25s %-6s %s 0 0\n' "$share" "$mount_point" "cifs" "$opts"
|
|
} >> /etc/fstab
|
|
log_success "Added to /etc/fstab (backup: $(basename "$bk"))"
|
|
}
|
|
|
|
# ── Parse a selection like "1", "1,3", "1-3", "1 3 5" into 1-based indices ──
|
|
# Prints one index per line. Silently drops anything that doesn't look like
|
|
# a number or a range — the caller validates indices against the actual
|
|
# list length.
|
|
_vdm_parse_selection() {
|
|
local input="$1" token start end i
|
|
for token in $(echo "$input" | tr ',' ' '); do
|
|
if [[ "$token" =~ ^([0-9]+)-([0-9]+)$ ]]; then
|
|
start="${BASH_REMATCH[1]}"; end="${BASH_REMATCH[2]}"
|
|
for ((i = start; i <= end; i++)); do echo "$i"; done
|
|
elif [[ "$token" =~ ^[0-9]+$ ]]; then
|
|
echo "$token"
|
|
fi
|
|
done
|
|
}
|
|
|
|
# ── One home box, one or more shares from it ────────────────────────────────
|
|
_vdm_add_mount() {
|
|
echo ""
|
|
local HOST_INPUT="" HOST="" SSH_USER=""
|
|
prompt_text " Home box's NetBird IP or an already-named host (check 'netbird status' on that box):" "" HOST_INPUT
|
|
if [ -z "$HOST_INPUT" ]; then
|
|
log_warning "No host entered — cancelling."
|
|
return 1
|
|
fi
|
|
_vdm_resolve_host "$HOST_INPUT"
|
|
HOST="$RESOLVED_HOST"
|
|
|
|
prompt_text " SSH username on the home box:" "$ACTUAL_USER" SSH_USER
|
|
|
|
_vdm_ensure_ssh_trust "$SSH_USER" "$HOST" || return 1
|
|
|
|
# Pure convenience on top of the /etc/hosts naming above (which is what
|
|
# actually makes the mount itself usable by name) — an SSH Host alias
|
|
# additionally skips typing the username for interactive `ssh` use.
|
|
if [[ ! "$HOST" =~ ^[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+$ ]] \
|
|
&& declare -F add_ssh_host_alias >/dev/null 2>&1 \
|
|
&& declare -F ssh_host_alias_exists >/dev/null 2>&1 \
|
|
&& ! ssh_host_alias_exists "$HOST"; then
|
|
local ADD_ALIAS=""
|
|
prompt_yn " Also add '$HOST' as an SSH alias (ssh $HOST, no username needed)? (y/n):" "y" ADD_ALIAS
|
|
[[ "$ADD_ALIAS" =~ ^[Yy]$ ]] && add_ssh_host_alias "$HOST" "$HOST_INPUT" "$SSH_USER" "22"
|
|
fi
|
|
|
|
log_info "Reading Samba shares already configured on $HOST (read-only)..."
|
|
local shares_raw
|
|
shares_raw="$(_vdm_list_remote_shares "$SSH_USER" "$HOST")"
|
|
if [ -z "$shares_raw" ]; then
|
|
log_warning "No Samba shares found on $HOST (or /etc/samba/smb.conf couldn't be read). Set up a share there first, the normal way, then re-run this."
|
|
return 1
|
|
fi
|
|
|
|
local share_names=() share_paths=()
|
|
while IFS='|' read -r sname spath; do
|
|
[ -z "$sname" ] && continue
|
|
share_names+=("$sname")
|
|
share_paths+=("$spath")
|
|
done <<< "$shares_raw"
|
|
|
|
echo ""
|
|
echo " Samba shares found on $HOST:"
|
|
local i
|
|
for i in "${!share_names[@]}"; do
|
|
printf " %d) %-20s %s\n" "$((i + 1))" "${share_names[$i]}" "${share_paths[$i]}"
|
|
done
|
|
echo ""
|
|
local SELECTION=""
|
|
prompt_text " Which one(s)? e.g. '1' or '1,3' or '1-3' or '1 3 5':" "" SELECTION
|
|
if [ -z "$SELECTION" ]; then
|
|
log_warning "Nothing selected — cancelling."
|
|
return 1
|
|
fi
|
|
|
|
local indices=()
|
|
while IFS= read -r i; do indices+=("$i"); done < <(_vdm_parse_selection "$SELECTION")
|
|
if [ "${#indices[@]}" -eq 0 ]; then
|
|
log_warning "Couldn't parse a selection from '$SELECTION' — cancelling."
|
|
return 1
|
|
fi
|
|
|
|
# Credentials asked once, reused for every share picked here — the
|
|
# common case is one personal account with access to several shares.
|
|
# Re-run this for a share needing a different account.
|
|
local SMB_USER=""
|
|
prompt_text " Samba username to connect with:" "$SSH_USER" SMB_USER
|
|
local SMB_PASS=""
|
|
SMB_PASS="$(_vdm_find_existing_smb_password "$HOST" "$SMB_USER")"
|
|
if [ -n "$SMB_PASS" ]; then
|
|
log_info "Reusing the Samba password already saved for '$SMB_USER' on $HOST from an earlier mount."
|
|
else
|
|
SMB_PASS="$(_vdm_prompt_password "Samba password for '$SMB_USER'")"
|
|
fi
|
|
|
|
local picked_any=false idx arr_i this_share this_path LABEL MOUNT_POINT
|
|
for idx in "${indices[@]}"; do
|
|
arr_i=$((idx - 1))
|
|
if [ "$arr_i" -lt 0 ] || [ "$arr_i" -ge "${#share_names[@]}" ]; then
|
|
log_warning "$idx isn't one of the listed shares — skipping."
|
|
continue
|
|
fi
|
|
this_share="${share_names[$arr_i]}"
|
|
this_path="${share_paths[$arr_i]}"
|
|
|
|
echo ""
|
|
log_info "Setting up: [$this_share] -> $this_path"
|
|
|
|
LABEL=""
|
|
while true; do
|
|
prompt_text " Local label for this mount:" "$this_share" LABEL
|
|
LABEL="$(echo "$LABEL" | tr -cs 'a-zA-Z0-9-' '-' | sed 's/^-*//;s/-*$//')"
|
|
if [ -z "$LABEL" ]; then
|
|
log_warning "Label can't be empty."; continue
|
|
fi
|
|
if grep -q "^${_VDM_TAG_PREFIX} ${LABEL} " /etc/fstab 2>/dev/null; then
|
|
log_warning "Label '$LABEL' is already used — pick another."; continue
|
|
fi
|
|
break
|
|
done
|
|
|
|
MOUNT_POINT=""
|
|
prompt_text " Local mount point:" "/mnt/${LABEL}" MOUNT_POINT
|
|
|
|
if _vdm_mount_local "$HOST" "$this_share" "$MOUNT_POINT" "$LABEL" "$SMB_USER" "$SMB_PASS"; then
|
|
# Read by callers like services/filebrowser.sh/audiobookshelf.sh/
|
|
# emby.sh that chain into this service and want to default
|
|
# their own "which directory" prompt to whatever was just
|
|
# mounted. Last one wins if several were picked in this run.
|
|
VDM_LAST_MOUNT_POINT="$MOUNT_POINT"
|
|
picked_any=true
|
|
fi
|
|
done
|
|
|
|
if [ "$picked_any" = true ]; then
|
|
echo ""
|
|
log_success "Done."
|
|
echo " Manage this and other network mounts anytime with:"
|
|
echo " sudo bash tools/mount-network-drive.sh"
|
|
fi
|
|
}
|
|
|
|
install_vpn-data-mount() {
|
|
echo ""
|
|
echo "╔══════════════════════════════════════════════════════════╗"
|
|
echo "║ VPN Data Mount — mount existing SMB shares from a home ║"
|
|
echo "║ box over NetBird (read-only — nothing changes there) ║"
|
|
echo "╚══════════════════════════════════════════════════════════╝"
|
|
|
|
if [ "$DRY_RUN" = true ]; then
|
|
echo "[DRY-RUN] Would offer to name a raw IP in /etc/hosts for reuse (SSH + this mount)"
|
|
echo "[DRY-RUN] Would test/set up passwordless SSH to a home box over its NetBird IP"
|
|
echo "[DRY-RUN] Would read-only list the home box's existing Samba shares (never writes there)"
|
|
echo "[DRY-RUN] Would let you pick one or more by number and mount them locally over CIFS"
|
|
echo "[DRY-RUN] Would add each to /etc/fstab with a root-only credentials file (not guest)"
|
|
echo "[DRY-RUN] Repeatable — can be run again for additional home boxes"
|
|
return 0
|
|
fi
|
|
|
|
# Every prompt below (home box IP, share selection, ...) has no sane
|
|
# unattended default — unlike most services here, there's no reasonable
|
|
# value to fall back to. Skip outright rather than let prompt_text's
|
|
# always-blank UNATTENDED behavior spin something forever.
|
|
if [ "$UNATTENDED" = true ]; then
|
|
log_info "Skipping — needs interactive input (home box IP, share selection, ...). Run 'sudo ./setup.sh vpn-data-mount' without --unattended."
|
|
return 0
|
|
fi
|
|
|
|
_vdm_list_existing
|
|
|
|
while true; do
|
|
local ADD=""
|
|
prompt_yn "Connect to a home box and mount some of its shares now? (y/n):" "y" ADD
|
|
[[ "$ADD" =~ ^[Yy]$ ]] || break
|
|
|
|
_vdm_add_mount
|
|
|
|
local AGAIN=""
|
|
prompt_yn "Connect to another (different) home box? (y/n):" "n" AGAIN
|
|
[[ "$AGAIN" =~ ^[Yy]$ ]] || break
|
|
done
|
|
}
|
|
|
|
[[ "${_RUN_STANDALONE:-0}" == 1 ]] && install_vpn-data-mount
|