traccar.sh's caddy_net wiring was fixed to mirror configure_caddy_for_service's
own mode resolution (CADDY_MODE from site config, then a local ~/docker/caddy,
then the legacy CADDY_REMOTE_HOST var) instead of only checking for the local
directory. That same bare directory check was copy-pasted into the caddy_net
wiring of every other Docker service in the repo, so a site with Caddy on a
different box would silently fail to join any of their containers to caddy_net
during setup (or, for homeassistant/koha, only get half the wiring right).
Applied the same fix mechanically across all 37 services using the standard
_CADDY_NET_BLOCK/_CADDY_NET_SECTION pattern (verified identical text via
scripted diff before touching any of them), plus by hand for:
- homeassistant.sh and koha.sh, which use their own differently-shaped
variables (HA_CADDY_NET_LINES / _CADDY_NET_ENTRY) for the same decision
- paintplus.sh and ai-stack.sh, which do a live `docker network connect`
instead of a compose network block
- watchyourlan.sh, whose Caddy note was worded for local-only setups
sms-inbound.sh got more than a mode swap: its Caddy wiring was hand-rolled
(not routed through configure_caddy_for_service) and had no remote-Caddy
path at all — a remote Caddy box would get a misleading "Caddy isn't
installed here" message instead of a snippet. Added
_sms_write_caddy_snippet(), mirroring the snippet-file pattern
configure_caddy_for_service uses everywhere else, and pointed the firewall
gate at the same three-way mode instead of a two-way dir check.
Verified: bash -n across all of services/*.sh, a scripted check that every
touched file has exactly one _CADDY_MODE resolution and no leftover bare
`[ -d "$DOCKER_DIR/caddy" ]` feeding a caddy_net decision, and spot-checked
docker compose config renders (traccar, mattermost) confirming the ${VAR}
interpolation and multi-service usage sites still resolve correctly.
New site config key: CADDY_REMOTE_HOST (set via 'sudo ./setup.sh configure').
When set, configure_caddy_for_service operates in "remote" mode instead of
writing to a local Caddyfile:
- Upstream uses CADDY_REMOTE_HOST:PORT (host IP, not container name)
- Snippet saved to ~/docker/caddy-snippets/<subdomain>.caddy
- User is shown scp/rsync commands to copy it to the Caddy machine
Three modes in configure_caddy_for_service (lib/common.sh and inline stubs):
local: ~/docker/caddy/ exists → write Caddyfile + reload (existing behavior)
remote: CADDY_REMOTE_HOST set → save snippet, print copy instructions
none: neither configured → silent return (unchanged)
All 31 service standalone bootstrap stubs updated with the new logic.
CADDY_REMOTE_HOST global added to all 42 standalone bootstrap sections.
setup.sh configure now prompts for CADDY_REMOTE_HOST with a clear explanation.
wolf.sh: add missing stubs (configure_caddy_for_service, write_readme,
prompt_yn, ensure_docker_dir_ownership) and the Authelia/Caddy/start calls
that were missing from the install function.
https://claude.ai/code/session_014CCYqVwW6d6f5dw1qRokYt
- Swaps image from filebrowser/filebrowser to gtstef/filebrowser:stable
- Uses ./data:/home/filebrowser/data volume layout (Quantum convention)
- Generates data/config.yaml instead of settings.json + database.db
- Mounts primary path as /files with defaultEnabled: true
- Deploys fbq-add-source.sh for adding extra directories post-install
- Updates README with Quantum-specific instructions
docs: save standalone bootstrap as docs/standalone-template.sh
Preserves the full standalone pattern from filebrowser.sh as the
reference template for adding standalone support to other services.
https://claude.ai/code/session_014CCYqVwW6d6f5dw1qRokYt
Symlinks don't work for giving scoped FileBrowser users access to extra
folders — FileBrowser's afero.BasePathFs blocks symlinks that resolve
outside the user's scope directory.
Switch to bind-mount approach: additional_directories.sh edits
docker-compose.yml to add real bind-mount entries for each extra folder,
so FileBrowser sees them as actual subdirectories within the user's root.
No symlinks, no scope-boundary issues.
Features:
- Reads FB_PATH from .env to list available source folders on the host
- Parses docker-compose.yml to show what's already configured per user
- Adds/removes volume entries with a timestamped backup before each edit
- Prompts to restart the container after changes
- Normalises scope paths from the API (handles missing leading slash)
manage_users.sh removed — user CRUD is handled by the FileBrowser web UI.
https://claude.ai/code/session_014CCYqVwW6d6f5dw1qRokYt
docker-compose now uses two separate mounts:
fb_users named volume → /srv (user home dirs + shortcuts, Docker only)
FB_PATH bind mount → /srv/data (actual files, unchanged on host)
User dirs and their shortcuts live entirely in the Docker named volume —
they persist across reboots but never appear on the host filesystem.
Full-access scope is /data; per-user scopes are /alice etc.
manage_users.sh:
- Detect layout: get_data_root() returns /srv/data (new) or /srv (legacy)
so the script works with both old and new installs automatically
- "Linked directories" renamed to "additional directories" throughout
(menu labels, prompts, error messages, usage text)
- prompt_add_links → prompt_add_dirs, menu_links → menu_add_dirs
- Available-folder listing and symlink targets use get_data_root()
- Scope examples updated to show /data for full access (new layout)
- Don't offer additional directories when scope is /data (full access)
https://claude.ai/code/session_014CCYqVwW6d6f5dw1qRokYt
Replace the "configure manually" stub with a real implementation that
matches common.sh's configure_caddy_for_service behaviour:
- Prompts to configure (skippable)
- Asks for domain with example hint
- Backs up Caddyfile before writing
- Checks for duplicate domain entry, offers overwrite
- Appends site block with reverse_proxy, security headers, JSON log
- fmt + reload via docker exec caddy caddy fmt/reload
Used when filebrowser.sh is run standalone without the repo present.
When the repo is present (common.sh sourced), the real function is used.
https://claude.ai/code/session_01UZus2Q9gNTfUdqSMrhuX29
DOCKER_DIR was computed before ACTUAL_HOME, so $HOME resolved to
/root (the root user's home) instead of the invoking user's home.
Files were created under /root/docker/ rather than ~/docker/.
Fix: compute ACTUAL_USER and ACTUAL_HOME first, then DOCKER_DIR.
https://claude.ai/code/session_01UZus2Q9gNTfUdqSMrhuX29
Add standalone bootstrap block at the top (BASH_SOURCE[0] == $0 guard):
- If lib/common.sh is present (repo cloned), source it — gets real helpers
and picks up any existing ~/docker/.config site settings automatically
- If not (one-off copy), inline minimal stubs: logging, require_docker
(checks Docker is installed, gives install hint if not), prompt_text/yn
(match common.sh eval pattern so install_filebrowser locals work),
configure_caddy_for_service (no-op with manual hint), write_readme
- Sets DOCKER_DIR, ACTUAL_USER, SITE_TZ etc. with sensible defaults
- register_service becomes a no-op (no wizard menu to register into)
- Execution deferred via _RUN_STANDALONE flag to after function definition
Still works identically when sourced by setup.sh — the bootstrap block
is skipped entirely in that path.
https://claude.ai/code/session_01UZus2Q9gNTfUdqSMrhuX29
Undo the host.docker.internal approach from the previous commit — proper
Docker networking routes Caddy to services by container name on the shared
caddy_net, not via the host gateway.
- lib/common.sh: configure_caddy_for_service now accepts either a plain
port number (localhost:PORT fallback) or container:port (preferred).
The Caddyfile entry uses the container name for direct Docker DNS routing.
- services/caddy.sh: remove extra_hosts hack; update Caddyfile template
comments to show container_name:port format
- All service files: update configure_caddy_for_service calls to pass
container_name:internal_port (e.g. "filebrowser:80", "mealie:9000").
Services using network_mode:host keep plain port numbers.
- tools/manage_users.sh: new FileBrowser user-management script (deployed
to ~/docker/filebrowser/ during installation). Manages users via the
FileBrowser REST API: list, add, delete, passwd, scope, info commands.
Documents username format (letters/numbers/hyphens/underscores),
password rules (min 8 chars, letter + number required), and scope path
convention relative to /srv (= FB_PATH on the host).
https://claude.ai/code/session_01UZus2Q9gNTfUdqSMrhuX29
- lib/common.sh: fix broken reverse_proxy target — localhost inside Caddy's
container is the container's own loopback, not the host; change to
host.docker.internal so proxied ports are actually reachable
- services/caddy.sh: add extra_hosts host.docker.internal:host-gateway so
the above resolves correctly; create caddy_net bridge network in Caddy's
own compose so other services can reference it as external; update all
Caddyfile template comments and README examples to match
- services/filebrowser.sh: update image tag from deprecated :s6 to :latest;
remove non-functional PUID/PGID env vars (filebrowser/filebrowser does not
honour them); add configure_caddy_for_service call; add caddy_net
- services/ntfy.sh: add configure_caddy_for_service call; add caddy_net
- services/portainer.sh: add configure_caddy_for_service call; add caddy_net
- services/frigate-notify.sh, watchtower.sh: add caddy_net for
container-to-container comms (frigate, ntfy) without a Caddy call
- All remaining web-facing Docker services: add caddy_net network block to
docker-compose and CADDY_NET to .env where applicable; services using
network_mode: host (wolf-pair, lyrion) have the top-level block only
https://claude.ai/code/session_01UZus2Q9gNTfUdqSMrhuX29
Introduces a one-time configuration wizard (sudo ./setup.sh configure)
that stores SITE_TZ, SITE_DOMAIN, and SITE_CADDY_NET in ~/docker/.config.
Every service now uses these as prompt defaults so the user types common
values once instead of re-answering the same questions for each service.
- lib/common.sh: load_site_config / save_site_config; auto-loads on source;
backward-compat BASE_DOMAIN alias kept for old .config files
- setup.sh: run_site_configure wizard; first-run offer after base install;
`sudo ./setup.sh configure` command to update defaults at any time
- 14 services: TZ_VAL now honours SITE_TZ, falling back to /etc/timezone
- 3 inline-heredoc services (filebrowser, homeassistant, ntfy): same fix
- authelia: SITE_TZ/SITE_DOMAIN as prompt defaults; SITE_CADDY_NET replaces
hardcoded caddy_net throughout (env, compose patch, network creation)
- minecraft, frigate-audio: simplify BASE_DOMAIN read to use SITE_DOMAIN
- sky-cam: SITE_TZ as default for timezone prompt
https://claude.ai/code/session_01Y4dMKtkqkpvmgDKoRdzhTG
- lib/common.sh: add write_readme helper. Every module now writes a README.md
into its ~/docker/<service>/ folder (self-documenting service folders).
- services/authelia.sh: SSO + 2FA portal, ported from the authelia-setup repo +
the monolith's working block (secrets + Argon2 hash generation, caddy_net,
Caddyfile forward-auth snippet + portal block, README). Guards against
clobbering an existing install.
- services/{filebrowser,ntfy,uptimekuma,portainer,watchtower}.sh: mechanical
migrations from the monolith, each with a README. Ports 8085/8090/3001/9443/—.
All pass bash -n; ./setup.sh --list shows them under homelab; dry-run run-one
exits 0 for each with real commands guarded.
https://claude.ai/code/session_017eA2qqq9jfF2tNtpUYL8vK
Claude