- dr_bringup.sh: bound every kopia call and docker compose up with a
timeout so one stuck service can't stall the rest of the batch, and
only exit non-zero if literally nothing came up — a partial recovery
is a partial success, not a failed run.
- backup_kopia.sh: optional DR_SYNC_HOST/DR_SYNC_PATH in backup.conf
scp's backup.conf + README.md to a spare box over SSH after every
successful backup, so dr_bringup.sh is ready there with no manual
copy step.
- backup.sh: prompts for the spare's SSH destination, verifies
connectivity at install time instead of failing silently at 2am, and
writes ~/docker/backup/README.md (this service never had one) so the
synced copy documents every command listed above.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NQkdAn3iG5A4WoqU9FHMaN
restore_kopia.sh is interactive and one-service-at-a-time, which doesn't
scale to standing up a cold spare box quickly during a real outage.
dr_bringup.sh restores every service's latest snapshot (or one named
service) and runs docker compose up -d with no prompts, so a full-stack
recovery is one command instead of N interactive restores.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NQkdAn3iG5A4WoqU9FHMaN
Confirmed live: after re-running the installer to pick up the
caddy_net/port fixes, Traccar crash-looped with
"FATAL: could not open file \"global/pg_filenode.map\": Permission
denied" — a Postgres-side error, not a Traccar or Caddy problem.
install_traccar() had two `chown -R $ACTUAL_USER "$TRACCAR_DIR"` calls
(one via ensure_docker_dir_ownership at the top, one explicit near the
end) inherited from the original H2-only script, where that was safe —
everything under the directory (logs/, data/, config/) was meant to be
host-user-owned. Once db/ started holding Postgres's own data files
(owned internally by whatever uid the postgres container runs as, not
$ACTUAL_USER), both of those recursive chowns reassign db/'s contents
to $ACTUAL_USER on every rerun, and Postgres can no longer read its own
files afterward.
Replaced both with non-recursive/scoped chowns that never touch db/:
the top-level directory itself, docker-compose.yml, and .env directly,
plus a separate `chown -R` limited to logs/ and data/ (which are
Traccar's own app-writable directories and always safe to reassign).
The previous fix only excluded 5038 (AMI). Confirmed live: after
attaching caddy_net, `docker compose up -d` still failed —
"failed to bind host port 0.0.0.0:5060/tcp: address already in use" —
because Asterisk (network_mode: host) also owns 5060 (SIP, tcp+udp)
and 5061 (SIP TLS, tcp), both inside Traccar's 5000-5150 range.
Asterisk gets priority on all three ports; Traccar's range just skips
them. Audited every other network_mode: host service in the repo
(caddy, homeassistant, kyber-server, lyrion, mattermost, watchyourlan,
wolf-pair, wolf) — none of them land in 5000-5150, so Asterisk is the
only conflict to account for.
Confirmed live: on a box also running Asterisk from this repo,
`docker network connect caddy_net traccar` failed with "failed to bind
host port 0.0.0.0:5038/tcp: address already in use". Asterisk runs with
network_mode: host (services/asterisk.sh), so its AMI (port 5038,
hardcoded in services/sms-inbound.sh) binds directly on the host's
network stack — no Docker NAT involved. Traccar's docker-compose.yml
published the entire 5000-5150 range for device protocols, which
needs Docker to also bind host port 5038 for its own port-forwarding,
directly colliding with Asterisk's AMI on any box running both
services from this repo.
Split the TCP range into 5000-5037 and 5039-5150 to skip that one
port; left UDP as a single 5000-5150 range since AMI is TCP-only.
Current Traccar images ship with no built-in account at all — the login
screen's Register flow creates the first user, and that user is
automatically made admin. The admin@admin.com/admin default our messages
still quoted belongs to older Traccar versions and no longer exists,
so anyone following our own output would try that login and fail.
Updated the dry-run summary, README, and final on-screen message to
describe the real flow, and to flag that self-registration stays open
to anyone who reaches the server until it's turned off (Settings →
Server → Permissions), since that's a real exposure window on a
freshly-installed instance with no way to lock it down at config time.
traccar.sh's caddy_net wiring was fixed to mirror configure_caddy_for_service's
own mode resolution (CADDY_MODE from site config, then a local ~/docker/caddy,
then the legacy CADDY_REMOTE_HOST var) instead of only checking for the local
directory. That same bare directory check was copy-pasted into the caddy_net
wiring of every other Docker service in the repo, so a site with Caddy on a
different box would silently fail to join any of their containers to caddy_net
during setup (or, for homeassistant/koha, only get half the wiring right).
Applied the same fix mechanically across all 37 services using the standard
_CADDY_NET_BLOCK/_CADDY_NET_SECTION pattern (verified identical text via
scripted diff before touching any of them), plus by hand for:
- homeassistant.sh and koha.sh, which use their own differently-shaped
variables (HA_CADDY_NET_LINES / _CADDY_NET_ENTRY) for the same decision
- paintplus.sh and ai-stack.sh, which do a live `docker network connect`
instead of a compose network block
- watchyourlan.sh, whose Caddy note was worded for local-only setups
sms-inbound.sh got more than a mode swap: its Caddy wiring was hand-rolled
(not routed through configure_caddy_for_service) and had no remote-Caddy
path at all — a remote Caddy box would get a misleading "Caddy isn't
installed here" message instead of a snippet. Added
_sms_write_caddy_snippet(), mirroring the snippet-file pattern
configure_caddy_for_service uses everywhere else, and pointed the firewall
gate at the same three-way mode instead of a two-way dir check.
Verified: bash -n across all of services/*.sh, a scripted check that every
touched file has exactly one _CADDY_MODE resolution and no leftover bare
`[ -d "$DOCKER_DIR/caddy" ]` feeding a caddy_net decision, and spot-checked
docker compose config renders (traccar, mattermost) confirming the ${VAR}
interpolation and multi-service usage sites still resolve correctly.
The game repo grew from a single genre/song count to 18 genres (119
synth-orchestra songs + 120 drum patterns), gamepad remap, and multiplayer,
and added its own Dockerfile/nginx.conf/.dockerignore specifically so only
index.html gets served. This service had fallen behind on both fronts: it
bind-mounted the whole cloned repo into nginx:alpine, publicly serving
README.md, CLAUDE.md, DEPLOYMENT.md, the Dockerfile itself, and old
versions_to_compare/*.html snapshots alongside the game. Build from the
repo's own Dockerfile instead (matching its .dockerignore) so only the game
is served, with gzip and /healthz along for free, and refresh the written
README's stale feature description.
The previous fix still baked database.user/database.password directly
into config/traccar.xml, duplicating the secret that .env already held
and leaving a second, unmanaged copy of it on disk.
Traccar supports reading its config from environment variables
(CONFIG_USE_ENVIRONMENT_VARIABLES=true, confirmed against the official
traccar/traccar docker/compose/traccar-mysql.yaml reference). Use that:
DATABASE_DRIVER/URL/USER/PASSWORD are now set in the compose file via
${POSTGRES_*} interpolation from .env, so .env is the only place the
credentials live — drop config/traccar.xml and its volume mount
entirely, matching the official reference example.
Also switched to the official reference healthcheck (wget against
/api/health, 1h start_period) — a real endpoint on real hardware rather
than a guessed /dev/tcp probe against an unverified image's toolset —
and added the interval/start-period env vars to the autoheal container
to match, while keeping the container scoped to just Traccar via the
autoheal=true label instead of the reference's host-wide "all".
Verified with `docker compose config` (both with and without a local
Caddy directory present) that the ${POSTGRES_DB}/${POSTGRES_USER}/
${POSTGRES_PASSWORD} references resolve correctly from .env with no
warnings.
The caddy_net wiring for the new db/traccar containers was gated only on
whether ~/docker/caddy exists locally, so it didn't account for a site
where Caddy runs on a different box (CADDY_MODE=remote or the legacy
CADDY_REMOTE_HOST var, set with no local Caddy directory). Resolve the
mode the same way configure_caddy_for_service does — explicit CADDY_MODE
first, then the local directory, then CADDY_REMOTE_HOST — so caddy_net is
only joined when Caddy is actually local. A remote Caddy reaches Traccar
via this host's published 8082 port regardless, so no other change is
needed for that path.
Traccar's docker image no longer bundles the H2 driver, so the
generated traccar.xml (org.h2.Driver / jdbc:h2:...) failed at startup
with no working database. Add a postgres:15-alpine db container with
a healthcheck, point traccar.xml/POSTGRES_* at it via .env, and gate
traccar's startup on db being healthy.
Also add a willfarrell/autoheal container scoped to just the traccar
container (via the autoheal=true label) that restarts it if its own
TCP healthcheck on 8082 fails.
Reruns reuse the existing DB_PASS from .env instead of generating a
new one, since the postgres volume keeps the original password from
its first init.
Two concrete asks: "a QR code generator for sipnetic... displayed on the
security website" and a real download for the baresip kiosk client
instead of just pointing at docs.
Sipnetic QR: ea_device_sipnetic_string() builds Sipnetic's own documented
account-string format (n=/u=/d=/p=/dt=, semicolon-separated, from
https://www.sipnetic.com/qr-codes) from the exact same data the existing
device-details panel already reads back out of pjsip.conf -- unlike
ea_device_provisioning()'s deliberately generic plain-text file (written
because no vendor XML format could be verified), this one has real
documentation to build against. Rendered client-side with
davidshimjs/qrcodejs (MIT, wraps Kazuhiko Arase's original QRCode for
JavaScript) embedded verbatim with its license header intact -- no CDN
call, no new Python dependency, same self-contained approach as the rest
of this page. New "Sipnetic QR code" button on each extension's detail
panel; verified the embedded library actually renders (not just parses)
via a real jsdom run producing real QR cell output.
Kiosk installer download: _secdash_copy_kiosk_installer copies
vendor/easy-asterisk/easy-asterisk-v0.10.0.sh alongside the deployed app
at install time (both update and fresh-install paths) and a new
/download/kiosk-client-installer.sh route serves it -- linked directly
from the Ring Groups card's help text instead of only being reachable by
manually finding the file in the repo. Copied at install time rather
than read live, since a standalone run of this one file (no full repo
clone -- explicitly supported here) has no vendor/ directory to read
from; missing source degrades to a clean 404 on that one link, not an
install failure.
Verified: bash -n, py_compile on the extracted embedded app.py, node
--check on the extracted embedded JS (including the newly-embedded QR
library), and the account-string output checked directly against
Sipnetic's own documented example format.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01JDyKC6Kdg7tofmYSmRtgww
Rename, member add/remove, and DID assignment could all already be
changed after a room existed -- type and timeout could only be set once,
at creation, with no way to flip an existing Ring group to Page (or back)
without deleting and recreating it, losing its members/DID assignment in
the process. Reported directly: "I can't edit the ring group to change
it to a page group."
Turns the Timeout/Type columns into inline-editable controls (matching
the same select/input the creation form already uses) with a Save button
per row, backed by a new ea_update_room_settings() that rewrites just
those two fields in rooms.conf, leaving name/members/DID untouched --
same read-modify-write pattern ea_rename_room() already uses.
Verified: bash -n, py_compile on the extracted embedded app.py, node
--check on the extracted embedded JS.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01JDyKC6Kdg7tofmYSmRtgww
The user asked for the security webpage to actually explain how to set
these up, not just this conversation. Adds a "How this works" disclosure
to the Ring Groups card (matching the existing help-block pattern already
used on Extensions and Personal numbers) covering:
- Ring vs Page's actual difference (first-answer-wins hunt group vs
Asterisk signaling auto-answer via SIP headers).
- Mixing an auto-answering device with normally-ringing phones needs no
new group type or per-member setting -- auto-answer lives in the
device's own SIP client config, so a plain Ring group already dials
everyone at once and an auto-answer-configured device just picks up
faster than a human can.
New docs/kiosk-paging-setup.md walks through the concrete path for a
dedicated always-on auto-answer device: Easy Asterisk's own baresip-based
"kiosk" client, installed on a separate small Linux machine (not the
Asterisk server's Docker container -- the vendor script explicitly skips
baresip install when it detects Docker locally). Also notes plainly that
a browser/WebRTC auto-answer option doesn't exist on this server today
(no WSS transport configured) and would be new infrastructure work, not
a quick addition.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01JDyKC6Kdg7tofmYSmRtgww
The panel kept showing "no domain set" and "TURN not configured" on a box
that has both. The cause was reading the wrong file: I had it reading the
host-side .env, a 600 file needing an ACL grant, a ProtectSystem exception
and a systemd Environment= line to even locate — three things that each had
to be right, and weren't.
The vendored web admin gets this right because it reads
/etc/easy-asterisk/config, written by the container's own entrypoint. That is
mounted on the host inside ASTERISK_EA_CONFIG_DIR, a directory this dashboard
is already granted read access to for rooms.conf. So it now reads that first,
falls back to .env, and finally to `docker exec cat` of the same file — each
source only filling gaps the previous left. No new permissions, and the value
shown is what Asterisk is actually running with rather than what the
installer asked for.
Also adds the requested provisioning file: a "Download settings" link per
extension serving a plain text file with server, username, password, display
name, transport, port, SRTP, a ready-made SIP URI, and TURN server/user/
password. Deliberately not a vendor-specific format — Sipnetic, Linphone,
Zoiper and Groundwire each want a different one and none could be verified
from here, and a confidently-wrong .xml is worse than a file you can read. It
warns in-file when the extension is UDP-only, when the cert is self-signed,
and that it contains a password.
The panel gains the SIP URI and says when the address shown is the host IP
rather than a configured domain.
Fixes a JS syntax error introduced with that note: an apostrophe escaped for
Python's benefit left a bare quote inside a single-quoted JS string, which
broke the whole page script — the table rendered empty. Now checked properly
by extracting the script and running `node --check` over it, which catches
this class of fault directly instead of inferring it from missing elements.
Verified with only Easy Asterisk's config present and .env absent entirely —
the state that failed before: domain, TURN server, user and password all
resolve, the download serves with the right filename, and the page has no
errors.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NAddJGE1G6eGaPzmScG5Vh
Three separate faults, reported together as "the old web admin made
extensions correctly and this doesn't".
1. Every write through ea_docker_write left pjsip.conf owned by root. `tee`
runs as root inside the container while Asterisk runs as `asterisk` and
expects to own its own config — the vendored admin's add_device() chowns
it back immediately after writing, and services/asterisk.sh's device
migration does too. This was the one writer in the project that didn't,
and is the most likely reason an extension created here behaves
differently from one created in the vendored admin. Now chowned after
every write, with a scoped sudoers entry for it, and a warning logged if
the chown itself fails rather than passing silently.
2. The dashboard's update path rewrote the systemd unit and then restarted
the service without daemon-reload, so systemd kept running the cached
unit. Any Environment= line added since the last FRESH install was written
to disk and ignored — which is exactly how a box with DOMAIN_NAME and TURN
both set in .env still reported "no domain set" and "TURN not configured".
3. The connection panel rendered at the top of the card, so on any table long
enough to scroll, the answer appeared off-screen above the row that was
clicked. It is now a table row injected directly beneath its own
extension, toggled by the same button, and it survives the transport and
password actions by reopening after the reload they trigger.
Also: LAN devices now get ice_support=yes when a TURN server is configured,
matching the vendored admin (a device given TURN credentials but no ICE can't
use the relay); the panel reports the device type, so a Mobile extension can
be confirmed as such; and an unreadable .env now says which of "path not
set", "file missing", "permission denied" or "TURN_SERVER empty" applies
instead of the flat "not configured" that covered all four.
Verified: the three .env failure states each produce their own message; the
detail row lands directly after its anchor, only one is ever open, it clears
on re-render and reopens rather than sticking closed; no duplicate or missing
element IDs and no JS errors.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NAddJGE1G6eGaPzmScG5Vh
services/sms-inbound.sh was rebuilt to deliver texts into Asterisk over AMI,
landing in the softphone's own thread, and ntfy was dropped from that path
entirely. Two pieces of prose written against the earlier design survived and
now contradict the working implementation:
- docs/anveo-direct-setup-guide.md still ended its "native Messages app"
section with "Codes arrive as ntfy push notifications instead". The point
of that section — no SIP client can write into Android Messages or iOS
Messages — is unchanged, but the place texts actually land is Sipnetic's
message thread.
- services/pstn-trunk.sh's generated README claimed inbound SMS "doesn't
touch Asterisk at all" and set up ntfy notifications. It is now the exact
opposite: sms-inbound reads this service's pstn-personal-dids.conf and
pstn-groups.conf to resolve DID ownership, the same files the inbound-voice
ring logic uses, which also makes install order matter — noted there now.
Documentation only; no behaviour change, and services/sms-inbound.sh is not
touched.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NAddJGE1G6eGaPzmScG5Vh
Making the transport a visible, equally-weighted choice meant new users had
to know the answer before they could get one right — and the wrong answer
fails in the least diagnosable way available: a UDP-only endpoint doesn't
refuse a TLS registration, it ignores it, so the phone times out and nothing
is logged anywhere.
The add form now creates Remote/FQDN (TLS 5061) extensions without asking.
TLS is listed first in the markup so it is the default before any script
runs, and the JS no longer switches it to LAN on a box with no domain — that
box is not better served by UDP, it just needs the phone told to trust a
self-signed certificate, which the disclosure now says at the point of
choosing.
Transport and auto-answer moved behind an "Advanced…" toggle, leaving name,
extension and category as the whole form. The toggle resets on cancel and
after a successful add so it doesn't stay open across uses.
Verified in the browser on two fixtures — with and without DOMAIN_NAME set —
that the panel starts hidden, the transport reads fqdn untouched in both
cases, and each shows the right hint when opened.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NAddJGE1G6eGaPzmScG5Vh
Adding an extension from the dashboard gave back a password and nothing else
— no server, no TURN credentials, and no indication of which transport the
endpoint had actually been written with. A correctly-created extension and
one that could never register looked identical.
Each row gets an info button opening the full set: SIP server, username,
password, transport and port, and the TURN server/user/password. The password
is read back from pjsip.conf rather than regenerated, so re-pairing a handset
no longer means deleting and recreating the extension. The same panel can
switch an extension between LAN (UDP 5060) and Remote/FQDN (TLS 5061) and
reset its password in place, keeping its category, room membership and PSTN
permissions.
That transport choice is the likeliest cause of a phone that looks right and
never registers: an endpoint written transport=transport-udp will not answer
a TLS registration and the phone just times out. The add form now defaults to
Remote/FQDN whenever DOMAIN_NAME is set, rather than always LAN.
Reading TURN details needs Asterisk's .env, which is chmod 600 — the
installer now grants the service user read on that one file via ACL and lists
it in the unit's ReadOnlyPaths, since ProtectSystem=strict would otherwise
hide it. The UI says so plainly if the file still isn't readable.
Also fixes a real gap: ea_add_device is a third, independent writer of
endpoint blocks alongside the two vendor paths that services/asterisk.sh
patches, and it was not emitting message_context=sip-messaging — so an
extension created from this dashboard silently had no internal SIP messaging
while one created from the vendor admin did.
Verified against a fixture: transport round-trips TLS↔LAN without
accumulating duplicate transport/media_encryption/ice_support keys, password
reset rewrites only the target extension's auth section, delete still works
after edits, and the browser shows the populated panel with the add form
defaulting to fqdn when a domain is configured.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NAddJGE1G6eGaPzmScG5Vh
Inbound: a real text through the full path (Anveo webhook -> relay ->
AMI MessageSend -> Sipnetic) landed with a SIP 200 OK, confirmed live.
Removes the last "UNVERIFIED"/"believed correct" hedges from
sms-inbound.sh now that the AMI permission class and the
Destination-not-To fix are both proven, not just plausible.
Outbound over SIP: tested directly by sending a MESSAGE toward Anveo's
trunk (the mirror image of the inbound webhook). Anveo's SBC responded
501 Not Implemented -- a real, unambiguous rejection of the method
itself. Closes off this avenue for good, symmetric with inbound
SMS-over-SIP already being confirmed unavailable on this DID: neither
direction is offered on this account via SIP. Sending still has no
working path here until Anveo activates HTTP SMS-API access.
Also updates docs/anveo-direct-setup-guide.md's SMS section, which still
described the ntfy-based mechanism this session fully replaced with
AMI/Sipnetic delivery, and corrects its stale "not available on Direct"
sending claim with what's actually been confirmed: SIP MESSAGE outbound
is a dead end (501), the HTTP API is real but pending Anveo activation.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01JDyKC6Kdg7tofmYSmRtgww
`manager show command MessageSend` (this box's own Asterisk, requested
live) documents Destination as the field that actually resolves an
outgoing message's endpoint/technology; To is documented as a
backward-compatible fallback for the destination when Destination is
omitted, and separately as just the outgoing SIP MESSAGE's To: header
content when Destination IS provided. Two live attempts using only To
(bare "pjsip:212", then domain-qualified "pjsip:212@domain") both
produced zero SIP wire traffic -- confirmed via `pjsip set logger on`
during a real delivery attempt against an actively-registered contact --
meaning that documented fallback path isn't actually wired up on this
Asterisk version regardless of what the docs promise.
Switched to Destination using the docs' own "endpoint" form: bare
"pjsip:<ext>", no domain, which resolves via the endpoint's default
aor/contact -- the same live, registered contact `pjsip show contacts`
already confirmed exists for this extension.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01JDyKC6Kdg7tofmYSmRtgww
Live test: AMI MessageSend to a bare "pjsip:212" produced zero SIP wire
traffic (confirmed via `pjsip set logger on` during a real delivery
attempt with the target extension actively registered) -- Asterisk
never even tried reaching the registered contact, meaning the failure
was in URI resolution before anything got sent, not a rejection from
the softphone. From already carried a domain (SMS_DOMAIN); To didn't.
Testing whether that asymmetry was the actual cause.
Explicitly a live experiment, not a confirmed fix -- next test will
show whether this produces real SIP MESSAGE traffic in the logger.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01JDyKC6Kdg7tofmYSmRtgww
Chased this as an ACL-ordering problem for the last several commits, and
those fixes were real and worth keeping, but none of them could ever
have fixed this: ProtectHome=true in the systemd unit doesn't just
restrict permissions, it mounts an empty, invisible filesystem over
/home, /root, and /run/user for the whole unit. ASTERISK_CONFIG_DIR
lives under /root/docker/... (or /home/<user>/docker/... on a non-root
install), so the relay process could never see it regardless of any ACL
grant on the real filesystem underneath -- from inside the sandboxed
unit it genuinely doesn't exist, while a plain unsandboxed shell
(confirmed live: `sudo -u smsrelay cat pstn-personal-dids.conf` outside
systemd) reads the exact same path fine.
Fix: ProtectHome=read-only instead of true. Still stops this service
from writing into /home or /root -- all it should ever need is read --
it just stops hiding them outright.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01JDyKC6Kdg7tofmYSmRtgww
Reproduced live: pstn-personal-dids.conf was confirmed readable by
smsrelay right after a manual ACL grant, then unreadable again
("does not exist" in the relay's log -- os.path.isfile() swallows the
PermissionError and just returns False) immediately after the very next
fresh install. The only thing that ran in between was this same
install's own Asterisk container restart (needed to pick up the new AMI
secret).
The ACL grant was sequenced BEFORE that restart. CLAUDE.md documents the
container's entrypoint re-chowning its mounted config directory on every
restart and says chown alone can't touch ACL entries -- true, but
apparently this image's entrypoint also chmods, and chmod recomputes a
directory's ACL mask entry, which can silently weaken a named-user grant
made before it even though the grant's ACL entry itself is untouched.
Fix: do the grant last, after the restart-or-not branch, so nothing left
in this install run can undo it. ensure_docker_dir_ownership() (chown
only, confirmed in lib/common.sh, no chmod) stays where it was --
chow doesn't need this ordering fix, only the ACL grant does.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01JDyKC6Kdg7tofmYSmRtgww
A token mismatch returned a bare 404 with no journal line at all, so
"nothing is happening" was indistinguishable from "no request ever
arrived" -- exactly what a stale provider URL looks like after a
RELAY_TOKEN rotation (every full reinstall generates a new one, which
invalidates whatever's still pasted into the DID's SMS tab until it's
updated). Now logs the request's source IP and path length -- never the
attempted path itself, since that's unauthenticated input from whoever
hit the port, no reason to trust or echo it into the journal.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01JDyKC6Kdg7tofmYSmRtgww
The port-taken message on the last run ("Port 8093 was taken — the relay
will use 8094") was this service colliding with itself, not a real
conflict. Fresh-install never stopped the previous run before scanning
for a free port, so it always found its own earlier process still bound
to 8093, silently moved to 8094, and then `systemctl enable --now` was a
no-op against an already-active unit -- meaning the OLD process (holding
the OLD AMI secret and OLD relay token, from before this session's
settings.env fix) kept serving traffic while the freshly-written config
and port sat unused underneath it.
Fix: `systemctl stop sms-inbound` right before the port scan. Now the
scan only reports a real conflict from something else, and the box
should settle back on 8093 (or whatever's actually free) with the
process that's really running matching what was just configured.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01JDyKC6Kdg7tofmYSmRtgww
Root cause of the "line 9: from: unbound variable" crash: SMS_FORWARD_URL
stores Anveo's own template placeholders literally ($[from]$, $[to]$,
$[message]$ -- text Anveo substitutes on its end, not ours). Written into
settings.env double-quoted, that landed in the file as
SMS_FORWARD_URL="...?from=$[from]$&...". Harmless to write, but the
update path `source`s this same file on every re-run, and bash reads
$[from] as legacy arithmetic expansion ($[...] == $((...))) even inside
double quotes -- a bare name in it means "look up variable from", which
is unset, and setup.sh runs under `set -uo pipefail`, so nounset kills
the whole installer before it gets anywhere near the AMI-diagnostics
code from the last two commits.
Fix: single-quote every value in the written settings.env. A source'd
single-quoted assignment never re-expands its contents, so this is safe
regardless of what SMS_FORWARD_URL (or anything else in that file) holds.
This only fixes future writes -- the box that hit this already has a
broken settings.env on disk from before this fix existed, and "update"
mode sources that file before it gets a chance to rewrite it, so it will
crash the same way one more time even after pulling this. Choosing
"full install" instead on the next run skips the source entirely and
regenerates the file correctly quoted.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01JDyKC6Kdg7tofmYSmRtgww
First live test dropped an inbound text with only "no owner found for
this DID, dropped" in the journal -- not enough to tell a config-dir
path problem from an ACL/permission problem from a DID-normalization
mismatch from an actually-unassigned DID, without re-triggering a real
text each time. resolve_recipients() now prints which of those it hit:
config dir unset, file missing (which also silently covers "smsrelay
can't traverse/read config/asterisk" -- os.path.isfile() swallows
PermissionError and just returns False), normalized DID has no section,
section has no owner=, or a group owner has no current members.
Nothing added is more sensitive than what's already visible on the
dashboard itself (config dir path, a DID's own digits, the set of DIDs
that exist) -- never the message body.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01JDyKC6Kdg7tofmYSmRtgww
SMS-over-SIP is confirmed unavailable on this DID (the account's SMS tab
only offers "Forward to URL", no MESSAGE/INVITE option) so the diagnostic
dialplan from the previous commit is dead weight for delivery purposes,
though pstn-trunk.sh's message_context wiring stays since it's harmless
and costs nothing to leave in place.
Pivots the whole service: same proven HTTP-webhook front end (rate limit,
constant-time token check, message/from/to extraction), but the delivery
target changes from a push notification to a real SIP MESSAGE landing in
the extension's own softphone (Sipnetic), via Asterisk's Manager
Interface. "Direct mode" and all ntfy options are removed entirely per
instruction to fully replace ntfy, not keep both paths.
Recipient resolution reuses the exact on-disk formats
services/security-dashboard.sh already reads/writes: DID -> owner from
pstn-personal-dids.conf, and for a Ring-Group owner ("@Name"), that
group's current members from pstn-groups.conf -- so delivery always
reflects live DID ownership and live group membership, not a snapshot
from assignment time.
AMI access is scoped tightly: a dedicated "smsrelay" manager.conf user
with only the "message" permission class, bound to 127.0.0.1, secret
generated via generate_password. The service account also gets a POSIX
ACL grant (not chmod/group, which the container's entrypoint reverts on
every restart) for read-only access to the two config files above.
Flagged as UNVERIFIED in code comments and will need a live test: the
"message" AMI permission class name and MessageSend's To/From/Body
parameter names are believed correct from documentation but unconfirmed
against a real Asterisk instance. ami_deliver() logs every AMI response
in full specifically so the first real delivery attempt is
self-diagnosing if something here is wrong.
Verified before commit: bash -n on the full file, and py_compile on the
extracted relay.py (configparser/socket/hmac/http.server, all stdlib).
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01JDyKC6Kdg7tofmYSmRtgww
missing SMS-URI print on update
Two real bugs from the previous commit, both confirmed live on an
actual box where inbound calling had been working:
1. Interleaving the new #include between the two existing trunk
includes broke 'from-pstn-trunk' loading entirely (confirmed via
the box's own dialplan-reload verification check going from
passing to failing on the exact run that added the new include).
Root cause of the underlying quirk still isn't understood — same
as the original single-file-structure bug this file's own comments
already document — so the fix is defensive rather than diagnosed:
append the new include at the very end of the file instead of
between two already-working ones, minimizing disturbance to
whatever ordering/adjacency that loader is sensitive to.
2. When the same verification check fails, _pstn_ensure_live_includes
now automatically falls back to a full container restart and
re-checks, instead of just warning and leaving inbound calls
broken until the operator finds this on their own — confirmed live
this session that a restart (not just dialplan reload) reliably
fixes a context that's genuinely new to the running process.
3. The SMS-over-SIP URI printout was appended only to
install_pstn-trunk's fresh-install tail, which "update in place"
never reaches (it returns early). Factored into
_pstn_print_sms_over_sip_info and called from both paths, so it
actually shows up on the far more common update-in-place run.
Wires message_context=pstn-sms-inbound onto the trunk endpoint (same
pattern services/asterisk.sh already uses for internal SIP MESSAGE
texting — a dedicated context so an inbound MESSAGE doesn't fall back
to context=from-pstn-trunk, which already owns "_X." for INVITE-based
calls) and writes a new [pstn-sms-inbound] dialplan context.
That context deliberately only logs every plausible source for the
sender number, destination DID, and body (X-ANVEO-SMS-FROM/TO
headers, MESSAGE(from)/(to)/(body)) rather than attempting to parse
and route immediately — Anveo's own documentation for this feature
has already proven unreliable twice this session (a dead SMSbySMS
endpoint, and three mutually-contradicting docs pages for the general
API), so this waits for a real test message to confirm which fields
actually show up before building extraction/routing logic against
them.
The install summary now reads DOMAIN_NAME straight from Easy
Asterisk's own .env (the same FQDN already serving SIP for the voice
trunk) and prints the exact `smshandler@<domain>:5060` URI to paste
into the DID's SMS-over-SIP settings, plus how to watch for the first
test message in the Asterisk console.
The previous fix (trimming the Name comparison) was real but not the
actual culprit here. loadExtensions()'s fallback for a device with no
pstn-permissions.conf entry — the normal, default state for any
extension never granted PSTN access — set restrict: "none", which
isn't one of the dropdown's five valid values (full/restricted/
restricted-in/restricted-out/internal). The <select> silently fell
back to its first option ("full") while the underlying model kept
"none", so the mismatch reappeared identically on every load
regardless of caching, matching a persistent bug survives hard
refresh and a private window. Use "internal" instead, matching the
documented default and the value the dropdown actually supports.
rowEdits() compared the Name field's trimmed DOM value against the
untrimmed model value — any device whose stored name has stray
leading/trailing whitespace (e.g. from a manual pjsip.conf edit)
permanently failed that comparison on every load, showing the
unsaved-changes bar with nothing actually changed. Trim both sides.
Adds a Personal number column directly on the Ring Groups table (same
underlying write as the Personal Numbers card's owner picker, just
surfaced where it's actually needed instead of requiring a separate
trip) and closes the gap that group ownership previously left open:
a DID assigned to a group only rang members on inbound calls, with no
way for members to actually use it outbound.
_reconcile_group_cid_members() now makes a Ring Group's DID double as
every current member's outbound Caller-ID override in
pstn-permissions.conf, wired into every path that can change either
side of that relationship: assigning/reassigning/removing the group's
DID, joining/leaving the group, renaming it (repoints
pstn-personal-dids.conf's owner instead of leaving a stale reference,
members' Caller-ID untouched since neither the DID nor membership
changed), and deleting it (unassigns the DID entirely, clearing it
from every remaining member).
An individual extension's own personal_did always wins over a group's
- a member only ever inherits the group's DID into an empty
personal_did, and only ever loses an inherited one that still matches
the group's current DID, so a real individual assignment is never
clobbered. Verified end-to-end (create/assign/join/leave/rename/
delete, plus the individual-wins precedence case) against a local
harness before committing, given how much the outbound Caller-ID path
already burned this session.
Rooms' original flow was always create-empty-then-add-members-one-at-
a-time in the table afterward; the merge kept that flow and dropped
Groups' actual "check boxes, name it, done" creation UX, which is what
was actually asked for. Add-form now has a member picker so a Ring
Group can be built with its full membership in one step; existing
groups still use the per-row add/remove control for later changes.
Rooms already had the one thing Groups lacked — a real, dialable Easy
Asterisk extension with live ring/page dialplan logic — while Groups'
only unique capability was personal-DID ownership. Rebuilding that
ownership mechanism a second time under the Groups name would have
meant duplicating Rooms' dialplan-generation code; instead Rooms
(renamed "Ring Groups" for clarity) gains personal-DID ownership, and
the standalone Groups card/API/backend is removed entirely.
pstn-trunk.sh's existing group-owned-personal-DID machinery
(pstn-personal-group-ring.sh, reading pstn-groups.conf by name) is
untouched — a new sync_room_group_mirror() keeps that file in step
with a Ring Group's live membership automatically on every
create/rename/delete/member change, so pstn-trunk.sh never needs to
learn rooms.conf's format. Room names now validate against the same
pattern write_group() requires, so a room can never end up with a
name that would silently fail to sync once assigned a DID.
The PSTN-restart nudge now also fires on a Ring Group edit, but only
when that specific group currently owns a personal DID — most Ring
Groups never do, and prompting on every ordinary membership tweak
would just be noise.
"Auto-answer for everyone" is the existing Page (intercom) room type,
not a new control. Messaging stays exactly what it already was:
strictly per-extension, unrelated to Ring Group/personal-DID
membership.
Categories was a whole CRUD system (its own file, its own card, its
own API routes) for something that only ever had one functional
effect: tagging a device "mobile" to enable RTP NAT-keepalive tuning,
plus a per-category auto-answer default. Replaced with a single
"Mobile/cellular device" checkbox directly on the add-extension form
and each extension row, writing the same underlying category string
Easy Asterisk's device format already expects ("mobile" or
"standard") without a separate category registry to manage. Removes
ea_list_categories/ea_create_category/ea_delete_category/
ea_rename_category, their /api/ea-categories* routes, the Categories
card, and the now-unused categories.conf sudoers grant.
Rooms stays as-is — unlike Categories, it's the only actually-dialable
ring/page group in this dashboard (a real Easy Asterisk extension that
rings or pages members live), which the dashboard-only Groups feature
cannot replace.
The "Commit changes (restart Asterisk)" button was already wired
correctly, but lived in a passive banner that was easy to miss after
a save, letting an admin keep testing against Asterisk's stale
AST_CONFIG() read without realizing a restart was needed. Every
PSTN-affecting save now also prompts immediately ("Restart Asterisk
now?"), once per logical action (a single save, or one whole batch),
with the banner kept as a fallback for "not now".
Also:
- Extensions card is now collapsible like the other cards, open by
default.
- Concurrent-call caps card removed from the dashboard UI (the
underlying dialplan cap and pstn-limits.conf are untouched, just no
longer editable from this page).
- Categories/Rooms and Groups/Personal numbers are now visually
grouped under section headers, with a note clarifying that a Room
is a real dialable ring-group extension while a Group is a
dashboard-only bulk-action convenience, since both being "named
sets of extensions" invited exactly that confusion.
PJSIP's From-header username comes exclusively from the endpoint's
static from_user — it never falls back to the channel's CALLERID(num).
With from_user unset, Asterisk fell back to its own hardcoded default
("asterisk"), which the provider doesn't recognize as an account DID
and rejected outright: every outbound call went straight to busy with
the callee never ringing.
Restore the static from_user (required for the provider to accept the
call at all) and instead relay the per-call CALLERID(num) — personal_did
or the shared DID — via send_pai/send_rpid, which populate the
P-Asserted-Identity/Remote-Party-ID headers from the live channel
Caller-ID independent of from_user. This is the standard mechanism for
presenting a per-call Caller-ID over a trunk with one fixed From user.
The pjsip endpoint pinned a static from_user to the shared trunk DID,
which silently wins over CALLERID(num) for the SIP From header on
outbound calls. The dialplan's per-extension personal_did lookup
still set CALLERID(num) correctly, but every call still went out
showing the same DID regardless. Leaving from_user unset lets PJSIP
fall back to the channel's caller ID number, mirroring the inbound
side's existing no-static-callerid fix.
The behaviour was right but the vocabulary wasn't: the previous commit
replaced full/restricted/internal with a new none/open/out/in/both naming,
when the ask was to extend the existing tier dropdown rather than supplant it.
The dropdown now reads: full, restricted (both ways), restricted incoming,
restricted outgoing, internal. The stored values match — internal,
restricted, full, restricted-in, restricted-out — so the original three keep
their own names in the config file and migrating a legacy install is now
near-identity for them (tier=full becomes restrict=full, tier=restricted
becomes restrict=restricted, which is what that tier already meant).
restricted incoming = dials anywhere, only whitelisted numbers get through.
restricted outgoing = anyone can call in, may only dial the whitelist. Named
in parallel rather than as "full incoming", so the two sit next to each other
in the list without needing the parenthetical to tell them apart.
No behavioural change: the derived tier_out/allowed_out/tier_in/allowed_in
the dialplan reads are unchanged, so the dialplan itself is untouched.
Verified: legacy migration mapping the original tiers to their same-named
modes; both new modes round-tripping through the dashboard and compiling to
the right derived keys (restricted-in sets allowed_in only, restricted-out
sets allowed_out only); whitelist disabled on full and internal; and the
group-ring helper still ringing restricted-incoming only for a whitelisted
caller while restricted-outgoing rings for everyone.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NAddJGE1G6eGaPzmScG5Vh
The previous commit gave each extension two independent lists — numbers it
may dial and caller IDs that may reach it. That was more than asked for: the
whitelist is one set of numbers per extension, and what varies is which
direction(s) it constrains.
pstn-permissions.conf now has an authored pair, 'restrict' and
'allowed_numbers', where restrict is one of:
none no PSTN at all open unrestricted both ways
out may only dial the list in may only be called by the list
both the list applies both ways
tier_out/allowed_out/tier_in/allowed_in are now derived from that pair rather
than authored directly, and remain what the dialplan reads — so the dialplan
is unchanged from the previous commit and stays tested. 'tier' still mirrors
tier_out for rollback. Keeping the compiled keys means the file has one place
a human edits and one place Asterisk reads, which is the same authored/
compiled split a named-number-list feature would need later.
The migration handles both prior shapes: a genuinely legacy single-tier file
(full becomes open, restricted becomes both — reproducing what the old
dialplan did), and the short-lived two-list shape from the previous commit
(inferred back to a mode, preferring the more restrictive reading). Still
idempotent, still backs up first.
The dashboard drops from two dropdowns and two fields to one of each, with
the whitelist greyed out for the modes that don't use one, and the PSTN
column sorting by how much reach a mode grants rather than alphabetically.
Verified: migration from both shapes; the dashboard round-trip writing
restrict=in with the list compiled to allowed_in only; and the group-ring
helper across all four modes — Restrict inbound rings only for a whitelisted
caller, Restrict outbound rings for everyone, Restrict both rings only for
its own list, No PSTN never rings.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NAddJGE1G6eGaPzmScG5Vh
One tier and one allowed_numbers list governed both directions, with the same
list matched against dialled numbers going out and caller IDs coming in.
Those are different sets, so "dial anyone but only accept calls from a short
list" — and its reverse — were not expressible at all.
pstn-permissions.conf now carries tier_out/allowed_out and tier_in/allowed_in.
The dialplan reads them in the four places that gate a call: the outbound
NANP pattern, the international leg, each ring-group member block, and
personal-DID inbound routing — plus the group-ring shell helper. Internal
extension-to-extension calling and ring groups remain ungated by either, as
before.
Existing installs are migrated in place by _pstn_migrate_permissions_split,
which copies the old single tier into both directions (reproducing the box's
current behaviour exactly), backs the file up first, and is idempotent. It
runs alongside the dialplan write rather than after a reload, since the new
dialplan reading un-migrated keys would fail closed and deny every call.
tier/allowed_numbers keep being written as a mirror of the outbound values so
that rolling back to a pre-split pstn-trunk.sh degrades to the old semantics
instead of breaking.
The dashboard's Extensions table gains Outbound/Can-dial and Inbound/Can-be-
called-by columns, each number field enabled only by its own tier, tier
columns sorting by permissiveness rather than alphabetically, and a save that
posts the whole permission record so an unchanged direction isn't reset.
Verified: the migration on a hand-written config (idempotent on rerun,
messaging and personal_did preserved); generated dialplan and group-ring
helper reading the split keys; and the group-ring helper resolving a real
three-extension case — out=full/in=restricted rings only for a whitelisted
caller, out=restricted/in=full rings for everyone, in=internal never rings —
plus the browser round-trip writing tier_out=full with tier_in=restricted.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NAddJGE1G6eGaPzmScG5Vh
The SMS tab has one control — a "Forward to URL" checkbox and field, with
SAVE/RETURN buttons where RETURN discards. The instructions described a
destination dropdown that isn't there. Also flags that the generated URLs are
long (~90 chars relay, ~150+ direct) and worth re-opening the tab to confirm
they saved whole.
Adds a provider-risk section: the realistic way to lose the number is account
action or a lapsed balance rather than the company folding, so keep the
balance small, save a recent invoice offline (porting out needs a signed LOA
plus the latest bill, which you can't download once an account is closed),
and note that Anveo states it does not block port-outs.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NAddJGE1G6eGaPzmScG5Vh
The UI is inlined in app.py, so an upgrade changes the HTML behind a URL that
never changes and carried no cache headers. A browser holding the previous
page after an update is indistinguishable from the update having failed.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NAddJGE1G6eGaPzmScG5Vh
New service for one narrow job — getting SMS verification codes sent to a
VoIP number onto a phone with no SIM. Deliberately not a texting app: no
outbound path (Anveo Direct has none; that needs an Anveo Retail account, and
a free texting app covers sending), and messages arrive as push notifications
rather than being routed into Asterisk as SIP MESSAGE, since a code you read
and type is better served by a notification than a softphone chat thread.
Two modes, both driven entirely from the provider's "forward SMS to URL" box:
- direct — the provider calls ntfy itself; nothing installed here. ntfy
accepts GET publishing at /{topic}/(publish|send|trigger) with message and
title as query params, and auth via ?auth= holding base64url (unpadded) of
the literal "Bearer <token>" — confirmed against ntfy's server.go and
server_auth.go rather than its docs.
- relay — a stdlib systemd service, Caddy-fronted on its own domain with no
Authelia (the provider can't log in; a random 32-char token in the path is
the secret). Buys two things direct mode can't have: an unescaped "&" in a
message body survives intact, because the relay takes everything after the
last message= verbatim instead of parse_qs — which is why the generated URL
always puts the message placeholder last — and no ntfy credentials sit in a
third party's web portal.
Verification codes are bearer credentials, so: a 24-char random topic name
(the repo's ntfy defaults to auth-default-access: read-write, making the topic
name the read credential), constant-time token compare, a 60/min rate limit,
and the relay logs sender/recipient/length but never the message body.
The Anveo guide gains a section covering the two things that actually decide
whether codes arrive: short-code support (Anveo has it, unusually — VoIP.ms
does not except for Google) and Anveo's carrier-sourced *mobile* DIDs, which
are classified as mobile in the lookups that reject VoIP numbers at signup.
Also documents MMS and group texts being out of reach, and why the native
Messages app never sees any of this.
Verified against a stub ntfy: plain OTP, encoded "&", unencoded "&", "+" as
space, wrong token (404), missing message (400) and the rate limit (57x204
then 429) all behave; both installer modes were run end to end in a sandbox
and their generated URLs, settings files and READMEs checked.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NAddJGE1G6eGaPzmScG5Vh
The tab consolidation fixed what the page showed but not how it read. With
two extensions and nothing else configured it rendered ~1900px tall: six
cards all expanded, three paragraphs of prose before the first control, eight
Save buttons with no indication of which rows had been touched, browser
prompt() dialogs for renames, and a nine-column table with no scroll
container.
Interaction:
- Name and Category are edited in place and feed one batched save. Edited
rows get a highlight and a left rail; a sticky bar reports the count and
Save changes commits only those rows, routing each field to the endpoint it
needs (rename/category through the container, tier/numbers/messaging
through the permissions file — or the messaging-only endpoint with no
trunk). Discard reverts; leaving with edits pending warns. Delete keeps its
own per-row control since it is destructive.
- Categories, Rooms, Groups, Caps and Personal numbers became <details>
sections with item counts, so the tab opens on the extensions table.
Explanations moved behind "what this means" disclosures.
- Add-extension is behind a button; the one-time device password gets a
persistent dismissible callout rather than a line that scrolls away.
Everything else reports through toasts, replacing six inline message divs.
Presentation: a token-based stylesheet (spacing/radius/colour scale), sticky
translucent header, sticky table headers, status as a colour-coded pill,
focus-visible outlines, primary/secondary/danger button hierarchy, and a
.table-wrap that owns horizontal overflow. Security Log and CrowdSec cards
picked up the same card-body padding and scroll wrappers.
Verified in Chromium against a fixture Asterisk config at 1280px and 390px:
full layout opens at ~700px tall with five collapsed sections, editing two
rows marks both and shows "2 extensions edited", saving persists and clears
the dirty state, per-extension failures are reported individually rather than
swallowed, the bare no-container/no-trunk layout still collapses to
Ext/Name/Messaging with two cards and saves via the messaging-only endpoint,
and at 390px the page does not scroll horizontally while the table does.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NAddJGE1G6eGaPzmScG5Vh
Claude