diff --git a/services/pstn-trunk.sh b/services/pstn-trunk.sh
index 0cfb6f1..cffdb0e 100644
--- a/services/pstn-trunk.sh
+++ b/services/pstn-trunk.sh
@@ -2,8 +2,10 @@
# services/pstn-trunk.sh — SIP PSTN trunk add-on for services/asterisk.sh:
# US-only outbound (NANP dialplan
# restriction), independent outbound/inbound concurrent-call caps, a 3-tier
-# permission model per extension (internal-only / restricted to pre-approved
-# numbers / full US calling), a configurable inbound ring-group,
+# permission model applied SEPARATELY per direction (each of outbound and
+# inbound is internal-only / restricted to a list / unrestricted, so "dial
+# anyone, only take calls from a short list" and the reverse are both
+# expressible), a configurable inbound ring-group,
# IP-authenticated trunk (no SIP password stored), ntfy alerts on
# denied/rejected calls, and a periodic spend/volume check.
#
@@ -24,7 +26,7 @@
#
# Part of the modular post-install system (sourced by setup.sh).
-register_service pstn-trunk homelab "SIP PSTN trunk for asterisk — US-only, per-extension permission tiers, spend/volume alerts (any IP-authenticated provider — VoIP.ms and Anveo Direct both confirmed)"
+register_service pstn-trunk homelab "SIP PSTN trunk for asterisk — US-only, per-extension inbound/outbound permission tiers, spend/volume alerts (any IP-authenticated provider — VoIP.ms and Anveo Direct both confirmed)"
# ── Surviving Easy Asterisk's regeneration ──────────────────────────────────
# Easy Asterisk (the vendor project services/asterisk.sh builds on) fully OVERWRITES both pjsip.conf and extensions.conf from its own
@@ -50,7 +52,10 @@ register_service pstn-trunk homelab "SIP PSTN trunk for asterisk — US-only, pe
# after any base install update.
#
# ── Why permissions are a separate live file, not baked into the dialplan ──
-# pstn-permissions.conf holds each extension's tier (internal/restricted/full)
+# pstn-permissions.conf holds each extension's per-direction tiers
+# (tier_out/allowed_out for what it may dial, tier_in/allowed_in for which
+# caller IDs may reach it; 'tier'/'allowed_numbers' persist only as a
+# rollback mirror of the outbound values)
# and, for restricted, its pipe-separated approved-number list. The dialplan
# reads it via Asterisk's AST_CONFIG() function, which re-reads the file from
# disk on every call — so editing this file (by hand, or via the Security
@@ -267,8 +272,10 @@ EOF
# ── Shared: one inbound ring-group member's live permission check ─────────
# Emits a block that only adds this extension to PSTN_RING_LIST if it's
-# "full" tier, or "restricted" tier AND the inbound Caller-ID is on its
-# approved list. Uses a single-quoted heredoc (fully literal — no bash
+# "full" INBOUND tier, or "restricted" inbound tier AND the caller ID is on
+# its inbound approved list (allowed_in). The outbound tier is not consulted
+# here at all — an extension may dial anywhere and still accept calls from
+# only a handful of numbers, or the reverse. Uses a single-quoted heredoc (fully literal — no bash
# expansion) captured into a variable, then a pure bash string replace for
# the extension number placeholder — safer than sed here since it needs no
# escaping at all (the extension is plain digits, but this avoids relying on
@@ -282,9 +289,9 @@ _pstn_ring_member_block() {
# (bare "?label" / "Goto(label)"), not "label,1" (which addresses a
# different, nonexistent extension named "label" instead).
block=$(cat << 'MEMBER'
- same => n,Set(PSTN_M_TIER=${AST_CONFIG(pstn-permissions.conf,__EXT__,tier)})
+ same => n,Set(PSTN_M_TIER=${AST_CONFIG(pstn-permissions.conf,__EXT__,tier_in)})
same => n,GotoIf($["${PSTN_M_TIER}" = "full"]?ring__EXT__)
- same => n,Set(PSTN_M_ALLOWED=${AST_CONFIG(pstn-permissions.conf,__EXT__,allowed_numbers)})
+ same => n,Set(PSTN_M_ALLOWED=${AST_CONFIG(pstn-permissions.conf,__EXT__,allowed_in)})
same => n,GotoIf($["${PSTN_M_TIER}" = "restricted" & ${REGEX("^(${PSTN_M_ALLOWED})$" ${PSTN_CALLERID_NORM})}=1]?ring__EXT__)
same => n,Goto(skip__EXT__)
same => n(ring__EXT__),Set(PSTN_RING_LIST=${PSTN_RING_LIST}${PSTN_RING_SEP}PJSIP/__EXT__)
@@ -350,10 +357,10 @@ exten => _1NXXNXXXXXX,1,NoOp(PSTN outbound call attempt from ${CHANNEL} to ${EXT
same => n,GotoIf($[${REGEX("^(242|246|264|268|284|340|345|441|473|649|658|664|670|671|684|721|758|767|784|787|809|829|849|868|869|876|939)$" ${PSTN_AREA_CODE})} = 1]?pstn_intl_blocked,1)
same => n,Set(PSTN_CALLER=${CUT(CHANNEL,/,2)})
same => n,Set(PSTN_CALLER=${CUT(PSTN_CALLER,-,1)})
- same => n,Set(PSTN_TIER=${AST_CONFIG(pstn-permissions.conf,${PSTN_CALLER},tier)})
+ same => n,Set(PSTN_TIER=${AST_CONFIG(pstn-permissions.conf,${PSTN_CALLER},tier_out)})
same => n,GotoIf($["${PSTN_TIER}" = "full"]?pstn_check_busy,1)
same => n,GotoIf($["${PSTN_TIER}" = "restricted"]?pstn_check_allow_out,1)
- same => n,NoOp(Denied - ${PSTN_CALLER} has no PSTN permission, tier: ${PSTN_TIER})
+ same => n,NoOp(Denied - ${PSTN_CALLER} has no outbound PSTN permission, tier_out: ${PSTN_TIER})
__ALERT_DENY_TIER_LINE__
same => n,Busy(15)
same => n,Hangup()
@@ -392,9 +399,9 @@ exten => _011X.,1,NoOp(PSTN international outbound call attempt from ${CHANNEL}
same => n,GotoIf($["${PSTN_KILLED}" = "1"]?pstn_killed,1)
same => n,Set(PSTN_CALLER=${CUT(CHANNEL,/,2)})
same => n,Set(PSTN_CALLER=${CUT(PSTN_CALLER,-,1)})
- same => n,Set(PSTN_TIER=${AST_CONFIG(pstn-permissions.conf,${PSTN_CALLER},tier)})
+ same => n,Set(PSTN_TIER=${AST_CONFIG(pstn-permissions.conf,${PSTN_CALLER},tier_out)})
same => n,GotoIf($["${PSTN_TIER}" = "full"]?pstn_intl_check_country,1)
- same => n,NoOp(Denied intl - ${PSTN_CALLER} tier ${PSTN_TIER} not eligible for international calling)
+ same => n,NoOp(Denied intl - ${PSTN_CALLER} tier_out ${PSTN_TIER} not eligible for international calling)
__ALERT_DENY_INTL_TIER_LINE__
same => n,Busy(15)
same => n,Hangup()
@@ -410,7 +417,7 @@ __ALERT_DENY_INTL_COUNTRY_LINE__
same => n,Busy(15)
same => n,Hangup()
-exten => pstn_check_allow_out,1,Set(PSTN_ALLOWED=${AST_CONFIG(pstn-permissions.conf,${PSTN_CALLER},allowed_numbers)})
+exten => pstn_check_allow_out,1,Set(PSTN_ALLOWED=${AST_CONFIG(pstn-permissions.conf,${PSTN_CALLER},allowed_out)})
same => n,GotoIf($[${REGEX("^(${PSTN_ALLOWED})$" ${PSTN_DIALED})} = 1]?pstn_check_busy,1)
same => n,NoOp(Denied - ${PSTN_DIALED} not on ${PSTN_CALLER}'s approved number list)
__ALERT_DENY_NUMBER_LINE__
@@ -608,9 +615,9 @@ __ALERT_KILLED_IN_LINE__
; restart — see restart_asterisk_container() in services/security-dashboard.sh)
; before AST_CONFIG() actually returns the new value.
exten => pstn_personal_inbound,1,GotoIf($["${PSTN_PERSONAL_OWNER:0:1}" = "@"]?pstn_personal_group_ring,1)
- same => n,Set(PSTN_OWNER_TIER=${AST_CONFIG(pstn-permissions.conf,${PSTN_PERSONAL_OWNER},tier)})
+ same => n,Set(PSTN_OWNER_TIER=${AST_CONFIG(pstn-permissions.conf,${PSTN_PERSONAL_OWNER},tier_in)})
same => n,GotoIf($["${PSTN_OWNER_TIER}" = "full"]?pstn_personal_ring,1)
- same => n,Set(PSTN_OWNER_ALLOWED=${AST_CONFIG(pstn-permissions.conf,${PSTN_PERSONAL_OWNER},allowed_numbers)})
+ same => n,Set(PSTN_OWNER_ALLOWED=${AST_CONFIG(pstn-permissions.conf,${PSTN_PERSONAL_OWNER},allowed_in)})
same => n,GotoIf($["${PSTN_OWNER_TIER}" = "restricted" & ${REGEX("^(${PSTN_OWNER_ALLOWED})$" ${PSTN_CALLERID_NORM})}=1]?pstn_personal_ring,1)
same => n,NoOp(Denied - personal DID ${PSTN_DID_CALLED}'s owner ${PSTN_PERSONAL_OWNER} not authorized for this caller)
__ALERT_DENY_PERSONAL_LINE__
@@ -734,11 +741,11 @@ IFS=',' read -ra MEMBERS <<< "$MEMBERS_RAW"
for _ext in "${MEMBERS[@]}"; do
_ext="$(echo "$_ext" | xargs)"
[[ -z "$_ext" ]] && continue
- _tier="$(_ini_get "$CONF_DIR/pstn-permissions.conf" "$_ext" "tier")"
+ _tier="$(_ini_get "$CONF_DIR/pstn-permissions.conf" "$_ext" "tier_in")"
if [[ "$_tier" == "full" ]]; then
RING_LIST="${RING_LIST}${RING_LIST:+&}PJSIP/${_ext}"
elif [[ "$_tier" == "restricted" ]]; then
- _allowed="$(_ini_get "$CONF_DIR/pstn-permissions.conf" "$_ext" "allowed_numbers")"
+ _allowed="$(_ini_get "$CONF_DIR/pstn-permissions.conf" "$_ext" "allowed_in")"
if [[ -n "$_allowed" ]] && [[ "$CALLER" =~ ^(${_allowed})$ ]]; then
RING_LIST="${RING_LIST}${RING_LIST:+&}PJSIP/${_ext}"
fi
@@ -748,6 +755,62 @@ printf '%s' "$RING_LIST"
SCRIPT
}
+# ── Migration: single tier → separate inbound/outbound tiers ───────────────
+# Installs made before the split have only 'tier' and 'allowed_numbers', which
+# the new dialplan doesn't read — leaving them untouched would fail closed and
+# silently deny every PSTN call in both directions. Copies the old values into
+# both directions, which reproduces the exact behaviour the box had before,
+# then leaves the originals in place as the rollback mirror (see the header
+# _pstn_write_permissions_file writes).
+#
+# Idempotent: an extension that already has tier_out is skipped, so this runs
+# safely on every update. Backs the file up first — unlike most of this
+# installer, it edits a file the user may have hand-tuned.
+_pstn_migrate_permissions_split() {
+ local FILE="$1"
+ [[ -f "$FILE" ]] || return 0
+ grep -q '^[[:space:]]*tier[[:space:]]*=' "$FILE" || return 0
+ grep -q '^[[:space:]]*tier_out[[:space:]]*=' "$FILE" && return 0
+
+ cp "$FILE" "$FILE.backup.$(date +%Y%m%d-%H%M%S)"
+ local TMP
+ TMP="$(mktemp)"
+ awk '
+ # Emit the split keys immediately after each legacy key, preserving
+ # whatever spacing style the file already uses around "=".
+ {
+ line = $0
+ if (match(line, /^[ \t]*tier[ \t]*=[ \t]*/)) {
+ val = line; sub(/^[ \t]*tier[ \t]*=[ \t]*/, "", val)
+ print "tier_out=" val
+ print "tier_in=" val
+ print line
+ next
+ }
+ if (match(line, /^[ \t]*allowed_numbers[ \t]*=[ \t]*/)) {
+ val = line; sub(/^[ \t]*allowed_numbers[ \t]*=[ \t]*/, "", val)
+ print "allowed_out=" val
+ print "allowed_in=" val
+ print line
+ next
+ }
+ print line
+ }
+ ' "$FILE" > "$TMP"
+
+ if [[ -s "$TMP" ]]; then
+ mv "$TMP" "$FILE"
+ chmod 664 "$FILE"
+ log_success "Migrated pstn-permissions.conf to separate inbound/outbound tiers (backup saved alongside it)."
+ log_info "Every extension kept its existing behaviour — both directions were set to"
+ log_info "whatever its single tier used to be. Split them per direction in the"
+ log_info "Security Dashboard's Extensions tab."
+ else
+ rm -f "$TMP"
+ log_warning "Permission migration produced an empty file — left the original alone."
+ fi
+}
+
# ── Shared: initial concurrency limits (fresh install / explicit reset only
# — same "update never touches it" protection as pstn-permissions.conf, see
# the file-level comment above) ─────────────────────────────────────────────
@@ -784,8 +847,22 @@ _pstn_write_permissions_file() {
done
local _written_exts=""
{
- echo "; PSTN permission tiers — internal / restricted / full — PLUS two independent"
- echo "; axes per extension:"
+ echo "; PSTN permission tiers — internal / restricted / full — set SEPARATELY per"
+ echo "; direction:"
+ echo "; - 'tier_out' + 'allowed_out' gate calls this extension PLACES. allowed_out"
+ echo "; holds numbers it may DIAL."
+ echo "; - 'tier_in' + 'allowed_in' gate calls this extension RECEIVES (ring group"
+ echo "; membership and personal-DID routing). allowed_in holds CALLER IDs allowed"
+ echo "; to reach it."
+ echo "; The two are independent, so 'dial anyone, only take calls from a short list'"
+ echo "; and 'answer anyone, only dial a short list' are both expressible. Both lists"
+ echo "; are pipe-separated 11-digit numbers (a REGEX() alternation, see this file's"
+ echo "; own comments on why untrusted call data is never the pattern side)."
+ echo "; 'tier'/'allowed_numbers' are also written, mirroring the OUTBOUND values, so"
+ echo "; that rolling back to a pre-split pstn-trunk.sh keeps working with the old"
+ echo "; single-tier semantics. Nothing reads them once the split dialplan is in."
+ echo ";"
+ echo "; PLUS two further independent axes per extension:"
echo "; - 'messaging' for Asterisk's native internal SIP MESSAGE texting (no carrier"
echo "; SMS, no PSTN, no cost — a separate axis from PSTN calling, since the risk"
echo "; profile is different: an extension can be internal-tier for calling and"
@@ -808,6 +885,8 @@ _pstn_write_permissions_file() {
local _ext
for _ext in $FULL_EXTS; do
echo "[$_ext]"
+ echo "tier_out=full"
+ echo "tier_in=full"
echo "tier=full"
[[ " $MESSAGING_EXTS " == *" $_ext "* ]] && echo "messaging=yes"
[[ -n "${_personal_did_map[$_ext]:-}" ]] && echo "personal_did=${_personal_did_map[$_ext]}"
@@ -818,6 +897,10 @@ _pstn_write_permissions_file() {
_ext="$1"; local _nums="$2"
shift 2
echo "[$_ext]"
+ echo "tier_out=restricted"
+ echo "allowed_out=${_nums}"
+ echo "tier_in=restricted"
+ echo "allowed_in=${_nums}"
echo "tier=restricted"
echo "allowed_numbers=${_nums}"
[[ " $MESSAGING_EXTS " == *" $_ext "* ]] && echo "messaging=yes"
@@ -1458,6 +1541,10 @@ _pstn_apply_settings() {
_pstn_write_dialplan_include "$ASTERISK_DIR/pstn-trunk-dialplan.conf" "$DID" "$NTFY_URL"
_pstn_write_inbound_dialplan_include "$ASTERISK_DIR/pstn-trunk-inbound-dialplan.conf" "$RING_EXTS" "$NTFY_URL"
_pstn_write_personal_group_ring_script "$ASTERISK_DIR/pstn-personal-group-ring.sh"
+ # Must run alongside the dialplan write, not after a reload: the dialplan
+ # above reads tier_out/tier_in, so an un-migrated permissions file would
+ # deny every call in the window between the two.
+ _pstn_migrate_permissions_split "$ASTERISK_DIR/pstn-permissions.conf"
_pstn_write_usage_alert_script "$EA_DIR/pstn-trunk-usage-alert.sh" "$EA_DIR" "$ASTERISK_DIR" \
"$RATE" "$MONTH_THRESHOLD" "$BURST_THRESHOLD" "$MAX_MONTHLY_SPEND" "$NTFY_URL" "$CONTAINER_NAME"
ensure_docker_dir_ownership "$ASTERISK_DIR"
diff --git a/services/security-dashboard.sh b/services/security-dashboard.sh
index 18d11d8..da37228 100644
--- a/services/security-dashboard.sh
+++ b/services/security-dashboard.sh
@@ -226,9 +226,17 @@ which tab a given extension's settings live on.
- **Extensions** — one row per extension, merged from \`pjsip.conf\` (which
always works) and, when the Easy Asterisk container is reachable, its own
device list. Columns: Ext, Name, then Category/Status/Transport if that
- container is present, then Tier/Approved-numbers if a PSTN trunk dialplan
- is installed, then Messaging (always — internal SIP texting has no PSTN
- dependency at all: no cost, no carrier, no DID).
+ container is present, then four PSTN columns if a trunk dialplan is
+ installed — **Outbound** tier + "Can dial", and **Inbound** tier + "Can be
+ called by" — then Messaging (always: internal SIP texting has no PSTN
+ dependency at all — no cost, no carrier, no DID).
+
+ The two PSTN directions are independent. Each is \`internal\` (no PSTN that
+ way), \`restricted\` (only the numbers beside it) or \`full\` (any US
+ number), and each has its own list, because they hold different things:
+ "Can dial" is numbers this extension may call, "Can be called by" is caller
+ IDs allowed to reach it. Internal extension-to-extension calling and ring
+ groups are never gated by either.
Name and Category are edited **in place**; every cell feeds one batched
save. Rows you've touched get a highlight and a left rail, a sticky bar
@@ -1134,7 +1142,12 @@ def _write_ini_cp(path, header, cp):
PERMISSIONS_HEADER = (
- "; PSTN permission tiers - internal / restricted / full - PLUS two\n"
+ "; PSTN permission tiers - internal / restricted / full - set SEPARATELY\n"
+ "; per direction: tier_out/allowed_out gate what an extension may DIAL,\n"
+ "; tier_in/allowed_in gate which CALLER IDs may reach it. 'tier' and\n"
+ "; 'allowed_numbers' mirror the outbound values so a rollback to a\n"
+ "; pre-split pstn-trunk.sh still works; nothing reads them otherwise.\n"
+ "; PLUS two\n"
"; independent per-extension axes: messaging (internal SIP MESSAGE\n"
"; texting) and personal_did (outbound Caller-ID override; inbound\n"
"; routing for personal DIDs lives in pstn-personal-dids.conf).\n"
@@ -1173,70 +1186,124 @@ def _read_permissions_cp():
def get_all_permissions():
- """{ext: {"tier": ..., "allowed_numbers": "num|num|...", "messaging":
- bool}} for every extension with a non-default record. Extensions with
- no section are implicitly "internal"/messaging-disabled — the
- dialplan's AST_CONFIG() lookup treats a missing section/key as empty/
- denied the same way, so there's nothing to return for them here; the
- UI fills in the defaults for any known extension (from
- list_extensions()) not present in this dict."""
+ """{ext: {"tier_out", "allowed_out", "tier_in", "allowed_in",
+ "messaging"}} for every extension with a non-default record.
+
+ Outbound and inbound are independent axes: tier_out/allowed_out gate what
+ an extension may DIAL, tier_in/allowed_in gate which CALLER IDs may reach
+ it (ring-group membership and personal-DID routing). That's what makes
+ "dial anyone, only accept calls from a list" and "answer anyone, only
+ dial a list" both expressible.
+
+ Falls back to the pre-split 'tier'/'allowed_numbers' keys for either
+ direction that hasn't been migrated yet, so the UI reads correctly even
+ on a box where services/pstn-trunk.sh hasn't been re-run — the migration
+ itself lives there, not here.
+
+ Extensions with no section are implicitly internal/messaging-disabled —
+ the dialplan's AST_CONFIG() lookup treats a missing section/key as
+ empty/denied the same way, so there's nothing to return for them; the UI
+ fills in defaults for any known extension not present in this dict."""
cp = _read_permissions_cp()
result = {}
for section in cp.sections():
if not EXTEN_RE.match(section):
continue
+ legacy_tier = cp.get(section, "tier", fallback="internal")
+ legacy_nums = cp.get(section, "allowed_numbers", fallback="")
result[section] = {
- "tier": cp.get(section, "tier", fallback="internal"),
- "allowed_numbers": cp.get(section, "allowed_numbers", fallback=""),
+ "tier_out": cp.get(section, "tier_out", fallback=legacy_tier),
+ "allowed_out": cp.get(section, "allowed_out", fallback=legacy_nums),
+ "tier_in": cp.get(section, "tier_in", fallback=legacy_tier),
+ "allowed_in": cp.get(section, "allowed_in", fallback=legacy_nums),
"messaging": cp.getboolean(section, "messaging", fallback=False),
}
return result
-def write_permission(ext, tier, numbers_raw, messaging_enabled=False):
- """Saves one extension's tier + (for restricted) approved-number list +
- messaging flag in one action — messaging is an independent axis from
- the calling tier (see pstn-trunk.sh's file-level comment: an extension
- can be internal-tier for calling and still messaging-enabled, or vice
- versa), so it's set/cleared regardless of which tier branch runs below.
- Numbers are normalized to a pipe-separated list of 11-digit US numbers
- (a bare 10-digit entry gets a leading "1" added, not dropped — see
- _normalize_nanp_number) — pipe, not comma, because the dialplan uses
- this value directly as a REGEX() alternation pattern (see
- services/pstn-trunk.sh's file-level comment on why the untrusted call
- data is always the string being tested, never interpolated into the
- pattern side)."""
+def _apply_direction(cp, ext, prefix, tier, numbers_raw):
+ """Write one direction's tier + number list, returning the cleaned list.
+
+ prefix is "out" or "in". Setting a direction to internal drops only that
+ direction's two keys, never the whole section — an extension can
+ independently carry messaging=yes, a personal_did, and a permissive
+ setting in the OTHER direction, all of which must survive. (Removing the
+ section wholesale here was a real, confirmed bug in the single-tier
+ version of this function.)"""
+ tokens = re.split(r"[,\s|]+", (numbers_raw or "").strip())
+ clean = [n for n in (_normalize_nanp_number(t) for t in tokens if t) if n]
+ joined = "|".join(clean)
+
+ tier_key = "tier_" + prefix
+ nums_key = "allowed_" + prefix
+
+ if tier == "internal":
+ if cp.has_section(ext):
+ for key in (tier_key, nums_key):
+ if cp.has_option(ext, key):
+ cp.remove_option(ext, key)
+ return clean
+
+ if not cp.has_section(ext):
+ cp.add_section(ext)
+ cp.set(ext, tier_key, tier)
+ if tier == "restricted":
+ cp.set(ext, nums_key, joined)
+ elif cp.has_option(ext, nums_key):
+ cp.remove_option(ext, nums_key)
+ return clean
+
+
+def write_permission(ext, tier_out, allowed_out_raw, tier_in, allowed_in_raw,
+ messaging_enabled=False):
+ """Saves one extension's outbound tier + numbers, inbound tier + numbers,
+ and messaging flag in one action.
+
+ The two directions are independent: allowed_out holds numbers this
+ extension may DIAL, allowed_in holds CALLER IDs allowed to reach it. They
+ used to be one field serving both, which made "outbound to anyone,
+ inbound from a short list" impossible to express.
+
+ Messaging is a third independent axis (see pstn-trunk.sh's file-level
+ comment: an extension can be internal for calling and still
+ messaging-enabled, or vice versa), so it's set/cleared regardless of
+ either tier.
+
+ Numbers normalize to a pipe-separated list of 11-digit US numbers (a bare
+ 10-digit entry gains a leading "1" rather than being dropped — see
+ _normalize_nanp_number). Pipe, not comma, because the dialplan uses the
+ value directly as a REGEX() alternation — see services/pstn-trunk.sh on
+ why untrusted call data is always the string being tested, never
+ interpolated into the pattern side.
+
+ 'tier'/'allowed_numbers' are also written, mirroring the outbound values,
+ purely so that rolling back to a pre-split pstn-trunk.sh keeps working
+ with the old single-tier semantics. Nothing reads them once the split
+ dialplan is installed."""
if not ASTERISK_CONFIG_DIR:
return False, "No Asterisk install detected on this box"
ext = str(ext).strip()
if not EXTEN_RE.match(ext):
return False, "Invalid extension"
- if not TIER_RE.match(tier):
- return False, "Invalid tier"
-
- tokens = re.split(r"[,\s|]+", (numbers_raw or "").strip())
- clean_numbers = [n for n in (_normalize_nanp_number(t) for t in tokens if t) if n]
- numbers = "|".join(clean_numbers)
+ if not TIER_RE.match(tier_out or ""):
+ return False, "Invalid outbound tier"
+ if not TIER_RE.match(tier_in or ""):
+ return False, "Invalid inbound tier"
cp = _read_permissions_cp()
- if tier == "internal":
- # Only drop the tier/allowed_numbers keys, NOT the whole section —
- # an extension can independently have messaging=yes and/or a
- # personal_did assigned, and those must survive a tier change back
- # to internal. Confirmed live as a real bug: cp.remove_section(ext)
- # here used to silently discard both whenever tier was set to
- # internal.
+ clean_out = _apply_direction(cp, ext, "out", tier_out, allowed_out_raw)
+ clean_in = _apply_direction(cp, ext, "in", tier_in, allowed_in_raw)
+
+ # Rollback mirror — outbound values under the pre-split key names.
+ if tier_out == "internal":
if cp.has_section(ext):
- if cp.has_option(ext, "tier"):
- cp.remove_option(ext, "tier")
- if cp.has_option(ext, "allowed_numbers"):
- cp.remove_option(ext, "allowed_numbers")
+ for key in ("tier", "allowed_numbers"):
+ if cp.has_option(ext, key):
+ cp.remove_option(ext, key)
else:
- if not cp.has_section(ext):
- cp.add_section(ext)
- cp.set(ext, "tier", tier)
- if tier == "restricted":
- cp.set(ext, "allowed_numbers", numbers)
+ cp.set(ext, "tier", tier_out)
+ if tier_out == "restricted":
+ cp.set(ext, "allowed_numbers", "|".join(clean_out))
elif cp.has_option(ext, "allowed_numbers"):
cp.remove_option(ext, "allowed_numbers")
@@ -1247,9 +1314,9 @@ def write_permission(ext, tier, numbers_raw, messaging_enabled=False):
elif cp.has_section(ext) and cp.has_option(ext, "messaging"):
cp.remove_option(ext, "messaging")
- # Drop the section entirely once nothing (tier, numbers, messaging,
- # personal_did) is left in it — only reached this way when tier is
- # internal, messaging is off, and no personal_did was ever assigned.
+ # Drop the section entirely once nothing is left in it — only reachable
+ # when both directions are internal, messaging is off, and no
+ # personal_did was ever assigned.
if cp.has_section(ext) and not cp.options(ext):
cp.remove_section(ext)
@@ -1257,8 +1324,14 @@ def write_permission(ext, tier, numbers_raw, messaging_enabled=False):
if not ok:
return False, err
- if tier == "restricted" and not clean_numbers:
- return True, "Saved as restricted with an EMPTY approved list — no PSTN number can reach/be reached by it yet."
+ empty = []
+ if tier_out == "restricted" and not clean_out:
+ empty.append("outbound")
+ if tier_in == "restricted" and not clean_in:
+ empty.append("inbound")
+ if empty:
+ return True, ("Saved, but the " + " and ".join(empty) +
+ " list is restricted and EMPTY — no PSTN number is permitted in that direction yet.")
return True, "Saved"
@@ -2602,7 +2675,8 @@ INDEX_HTML = """
What these columns mean
Name and Category are editable in place — click, type, then Save. Adding an extension generates a random password and reloads PJSIP + rebuilds the dialplan automatically; the password is shown once, at the top of this card.
-
Tier — internal: no PSTN, can still call/receive other extensions and internal ring groups. restricted: internal, plus only the pre-approved US numbers in the next column. full: internal, plus any US number. Usually live on the next call; if one doesn't seem to take effect, use "Commit changes" above.
+
Outbound and Inbound are independent. Each is internal (no PSTN in that direction — internal extension-to-extension calling and ring groups always keep working either way), restricted (only the numbers listed beside it), or full (any US number). So "dial anyone, only take calls from family" is Outbound full + Inbound restricted, and the reverse is just as valid.
+
Can dial holds numbers this extension is allowed to call; Can be called by holds caller IDs allowed to reach it — different lists, which is why they're separate fields. Each is only editable when its own side is set to restricted. Usually live on the next call; if one doesn't seem to take effect, use "Commit changes" above.
Messaging — Asterisk's native SIP texting between extensions: no carrier SMS, no PSTN, no cost, and no dependency on a PSTN trunk at all (which is why this column is here even with no trunk installed). Independent of the calling tier. Enforced live by a dedicated dialplan context — see services/asterisk.sh's README, including its caveat that the sender-extraction logic still needs real-traffic confirmation. If this box predates that wiring, rerun sudo ./setup.sh asterisk.
@@ -2613,8 +2687,10 @@ INDEX_HTML = """
Category
Status
Transport
-
Tier
-
Approved numbers
+
Outbound
+
Can dial
+
Inbound
+
Can be called by
Messaging
@@ -3093,7 +3169,9 @@ async function loadExtensions() {
const permData = await fetch("/api/pstn-permissions").then(r => r.json());
const byExt = new Map();
(permData.extensions || []).forEach(e => byExt.set(e.ext, {
- ext: e.ext, name: e.name, tier: e.tier, allowed_numbers: e.allowed_numbers,
+ ext: e.ext, name: e.name,
+ tier_out: e.tier_out, allowed_out: e.allowed_out,
+ tier_in: e.tier_in, allowed_in: e.allowed_in,
messaging: e.messaging, ea: false, category: "", status: "", transport: "", encryption: "",
}));
@@ -3103,7 +3181,10 @@ async function loadExtensions() {
eaStatusMap = devData.status || {};
eaDevices.forEach(d => {
const row = byExt.get(d.extension) || {
- ext: d.extension, name: d.name, tier: "internal", allowed_numbers: "", messaging: false,
+ ext: d.extension, name: d.name,
+ tier_out: "internal", allowed_out: "",
+ tier_in: "internal", allowed_in: "",
+ messaging: false,
};
row.ea = true;
row.name = row.name || d.name;
@@ -3124,9 +3205,15 @@ async function loadExtensions() {
let extRows = [];
let extSort = { key: null, dir: 1 };
+// internal < restricted < full, so sorting a tier column groups by how
+// permissive it is rather than alphabetically (full would otherwise sort
+// between the other two).
+const TIER_ORDER = { internal: 0, restricted: 1, full: 2 };
+
function extSortValue(e, key) {
if (key === "ext") return parseInt(e.ext, 10);
if (key === "messaging") return e.messaging ? 1 : 0;
+ if (key === "tier_out" || key === "tier_in") return TIER_ORDER[e[key]] ?? -1;
return (e[key] || "").toString().toLowerCase();
}
@@ -3135,11 +3222,18 @@ function setCount(id, n) {
if (el) el.textContent = n ? "(" + n + ")" : "";
}
+function tierSelect(cls, value) {
+ return `";
+}
+
function renderExtensions() {
const tbody = document.querySelector("#ext-table tbody");
setCount("ext-count", extRows.length);
if (!extRows.length) {
- tbody.innerHTML = '
No extensions found — no Asterisk install detected, or pjsip.conf has no devices yet.
';
+ tbody.innerHTML = '
No extensions found — no Asterisk install detected, or pjsip.conf has no devices yet.