Merge pull request #119 from outis1one/claude/happy-knuth-hwnvbn

Claude/happy knuth hwnvbn

lib/provision.sh

@@ -94,8 +94,17 @@ provision_install_packages() {
 
 provision_create_kiosk_user() {
     echo "[2/10] Creating kiosk user..."
+    local kiosk_groups=(audio video input plugdev netdev)
+    # Not every Ubuntu release ships all of these - 26.04 Server has no
+    # netdev group - and useradd refuses to create the user at all if any
+    # -G group is missing. Create missing ones as plain system groups
+    # (no-op when they exist).
+    local g
+    for g in "${kiosk_groups[@]}"; do
+        sudo groupadd -f -r "$g"
+    done
     if ! id "$KIOSK_USER" &>/dev/null; then
-        sudo useradd -m -s /bin/bash -G audio,video,input,plugdev,netdev "$KIOSK_USER"
+        sudo useradd -m -s /bin/bash -G "$(IFS=,; echo "${kiosk_groups[*]}")" "$KIOSK_USER"
         echo "$KIOSK_USER:kiosk" | sudo chpasswd
         log_success "Kiosk user created (default password: kiosk - change it)"
     else
@@ -129,7 +138,12 @@ provision_install_app() {
     echo "[4/10] Installing kiosk app..."
     # *.mjs: pdf-render.mjs (pdf.js only ships as a JavaScript module).
     sudo cp "$KIOSK_APP_SRC"/*.js "$KIOSK_APP_SRC"/*.mjs "$KIOSK_APP_SRC"/*.html "$KIOSK_APP_SRC/package.json" "$KIOSK_APP_SRC/start.sh" "$KIOSK_DIR/"
-    sudo chown "$KIOSK_USER:$KIOSK_USER" "$KIOSK_DIR"/*.js "$KIOSK_DIR"/*.mjs "$KIOSK_DIR"/*.html "$KIOSK_DIR/package.json" "$KIOSK_DIR/start.sh"
+    # Not `chown "$KIOSK_DIR"/*.js ...`: that glob is expanded by *this*
+    # (admin) shell before sudo runs, and the kiosk user's home is private
+    # (mode 750 on 26.04), so it can't be listed - the pattern stays literal
+    # and chown fails. find runs as root. Top level only: node_modules is
+    # already the kiosk user's, and chrome-sandbox inside it must stay root's.
+    sudo find "$KIOSK_DIR" -maxdepth 1 -type f -exec chown "$KIOSK_USER:$KIOSK_USER" {} +
     sudo chmod +x "$KIOSK_DIR/start.sh"
 
     if offline_mode_active; then

menus/addon_asterisk_intercom.sh

@@ -62,7 +62,9 @@ baresip_installed_version() {
 # `apt install baresip` with no configured extension isn't something
 # this menu should call done.
 baresip_is_installed() {
-    command -v baresip &>/dev/null && [[ -f "$BARESIP_CONFIG_DIR/accounts" ]]
+    # sudo: it's under the kiosk user's home, which the admin running this
+    # can't look inside (mode 750) - a plain [[ -f ]] is always false there.
+    command -v baresip &>/dev/null && sudo test -f "$BARESIP_CONFIG_DIR/accounts"
 }
 
 baresip_is_running() {
@@ -78,9 +80,9 @@ addon_asterisk_intercom_status() {
         else
             echo "Asterisk Intercom: Installed (v${ver:-unknown}) - Not running"
         fi
-        if [[ -f "$BARESIP_CONFIG_DIR/accounts" ]]; then
+        if sudo test -f "$BARESIP_CONFIG_DIR/accounts"; then
             local account
-            account=$(head -1 "$BARESIP_CONFIG_DIR/accounts" 2>/dev/null)
+            account=$(sudo head -1 "$BARESIP_CONFIG_DIR/accounts" 2>/dev/null)
             local extension="${account#<sip:}"
             extension="${extension%%@*}"
             [[ -n "$extension" ]] && echo "  Extension: $extension"

menus/wifi.sh

@@ -20,13 +20,89 @@
 # is exercised by hand against real hardware only.
 #
 # Unlike the other migrated menus, this one has no sub-options - it's a
-# single linear wizard, same as the legacy configure_wifi - so wifi_menu
+# single linear wizard, same as the legacy configure_wifi. wifi_menu runs
-# IS the action, not a run_menu wrapper.
+# it (wifi_configure) and then pauses: run_menu clears the screen as soon
+# as a handler returns, which used to wipe every error message here
+# before it could be read - the menu just seemed to bounce back.
+#
+# The WiFi config goes in its own file, $NETPLAN_DIR/60-kiosk-wifi.yaml,
+# which netplan merges with the rest - not over the first *.yaml it finds,
+# which on a fresh install is the installer's wired config.
 #
 # Depends on: lib/menu.sh, lib/config.sh being sourced first.
 ################################################################################
 
+WIFI_NETPLAN_FILE="$NETPLAN_DIR/60-kiosk-wifi.yaml"
+
 wifi_menu() {
+    local rc=0
+    wifi_configure || rc=$?
+    echo
+    pause
+    return "$rc"
+}
+
+# The first wireless interface, by what it is (it has a wireless/ or
+# phy80211 entry in sysfs) rather than by name - adapters aren't always
+# named wl*. Falls back to the wl* naming convention.
+wifi_detect_iface() {
+    local d
+    for d in /sys/class/net/*; do
+        if [[ -d "$d/wireless" || -e "$d/phy80211" ]]; then
+            basename "$d"
+            return 0
+        fi
+    done
+    local name
+    for d in /sys/class/net/wl*; do
+        [[ -e "$d" ]] || continue
+        name=$(basename "$d")
+        echo "$name"
+        return 0
+    done
+    return 1
+}
+
+# Clear a software WiFi block (the rfkill "soft" switch) - with it set,
+# `ip link set up` fails with "RF-kill". The rfkill tool isn't installed
+# on a server, so via sysfs. A hard block (physical switch / BIOS) can't
+# be cleared from here and is reported instead.
+wifi_unblock() {
+    local r type
+    for r in /sys/class/rfkill/rfkill*; do
+        [[ -e "$r/type" ]] || continue
+        type=$(cat "$r/type" 2>/dev/null)
+        [[ "$type" == "wlan" ]] || continue
+        if [[ "$(cat "$r/soft" 2>/dev/null)" == "1" ]]; then
+            echo "WiFi is switched off in software (rfkill) - switching it on..."
+            echo 0 | sudo tee "$r/soft" >/dev/null || true
+        fi
+        if [[ "$(cat "$r/hard" 2>/dev/null)" == "1" ]]; then
+            log_warning "WiFi is switched off by a hardware switch or the BIOS/UEFI - turn it on there"
+        fi
+    done
+}
+
+# YAML single-quoted scalar: the only special character inside is the
+# quote itself, doubled. Safe for any SSID/password (", \, #, : ...) -
+# double quotes broke on a password containing " or \.
+wifi_yaml_quote() {
+    local v="$1"
+    printf "'%s'" "${v//\'/\'\'}"
+}
+
+# IFACE's first IPv4 address (without the /prefix), or nothing.
+wifi_iface_ip() {
+    ip -4 -o addr show dev "$1" 2>/dev/null \
+        | awk '{for (i = 1; i < NF; i++) if ($i == "inet") { sub("/.*", "", $(i+1)); print $(i+1); exit }}'
+}
+
+# True if IFACE has an IPv4 address.
+wifi_iface_has_ip() {
+    ip -4 addr show dev "$1" 2>/dev/null | grep -q "inet "
+}
+
+wifi_configure() {
     echo
     echo " ═══ WIFI CONFIGURATION ═══"
     echo
@@ -55,11 +131,11 @@ wifi_menu() {
     fi
 
     local wifi_iface
-    wifi_iface=$(ls /sys/class/net 2>/dev/null | grep -E "^wl" | head -1)
+    if ! wifi_iface=$(wifi_detect_iface); then
-
-    if [[ -z "$wifi_iface" ]]; then
         log_warning "No WiFi hardware detected"
-        echo "If you have a USB WiFi adapter, ensure it's plugged in."
+        echo "Network interfaces found: $(ls /sys/class/net 2>/dev/null | tr '\n' ' ')"
+        echo "If you have a USB WiFi adapter, make sure it's plugged in. A built-in"
+        echo "adapter with no driver shows up in 'lspci -k' / 'lsusb' but not above."
         return 1
     fi
 
@@ -74,9 +150,11 @@ wifi_menu() {
 
     ask_yes_no "Configure WiFi?" "n" || return 0
 
+    wifi_unblock
     echo "Bringing up interface..."
-    if ! sudo ip link set "$wifi_iface" up 2>/dev/null; then
+    local link_err
-        log_error "Failed to bring up interface"
+    if ! link_err=$(sudo ip link set "$wifi_iface" up 2>&1); then
+        log_error "Failed to bring up $wifi_iface: ${link_err:-unknown error}"
         return 1
     fi
     sleep 3
@@ -161,15 +239,9 @@ apply_wifi_config() {
     local ssid="$2"
     local password="$3"
 
-    # `|| true`: under set -e + pipefail (this whole tool runs under both),
+    # Our own file, merged by netplan with the others (wired config etc).
-    # `ls` matching nothing exits non-zero even with stderr silenced, which
+    local netplan_file="$WIFI_NETPLAN_FILE"
-    # would abort this function outright instead of falling through to the
+    sudo mkdir -p "$NETPLAN_DIR"
-    # default filename below. Same class of bug as the run_menu fix in
-    # lib/menu.sh - masked here in practice because cloud-init almost
-    # always leaves a *.yaml file behind, but not guaranteed.
-    local netplan_file
-    netplan_file=$(ls "$NETPLAN_DIR"/*.yaml 2>/dev/null | head -1) || true
-    [[ -z "$netplan_file" ]] && netplan_file="$NETPLAN_DIR/50-cloud-init.yaml"
 
     local backup=""
     if [[ -f "$netplan_file" ]]; then
@@ -190,29 +262,31 @@ network:
       dhcp6: false
       optional: true
       access-points:
-        "$ssid":
+        $(wifi_yaml_quote "$ssid"):
-          password: "$password"
+          password: $(wifi_yaml_quote "$password")
 EOF
 
-    if [[ -n "${SSH_CONNECTION:-}" ]] && [[ -n "$backup" ]]; then
+    if [[ -n "${SSH_CONNECTION:-}" ]]; then
+        # Reverts if the WiFi interface still has no address after 60s -
+        # not "can't ping 8.8.8.8", which on a network without internet
+        # would undo a perfectly good connection every time. No backup
+        # means there was no WiFi file before: revert = remove ours.
         local watchdog
         watchdog=$(mktemp --suffix=.sh)
         cat > "$watchdog" <<'WATCHEOF'
 #!/bin/bash
+# $1 = backup ("" if none), $2 = netplan file, $3 = WiFi interface
 sleep 60
-if [[ -f "$1" && -f "$2" ]]; then
+if ! ip -4 addr show dev "$3" 2>/dev/null | grep -q "inet "; then
-    ip=$(hostname -I | awk '{print $1}')
+    if [[ -n "$1" && -f "$1" ]]; then cp "$1" "$2"; else rm -f "$2"; fi
-    if [[ -z "$ip" ]] || ! ping -c 2 8.8.8.8 >/dev/null 2>&1; then
-        cp "$1" "$2"
     netplan apply 2>/dev/null
-        echo "WiFi config reverted - connection failed" | wall
+    echo "WiFi config reverted - $3 got no address" | wall
-    fi
 fi
 rm -f "$0"
 WATCHEOF
         chmod +x "$watchdog"
-        nohup sudo bash "$watchdog" "$backup" "$netplan_file" >/dev/null 2>&1 &
+        nohup sudo bash "$watchdog" "$backup" "$netplan_file" "$wifi_iface" >/dev/null 2>&1 &
-        echo "Watchdog started - will revert in 60s if the connection fails"
+        echo "Watchdog started - will revert in 60s if $wifi_iface gets no address"
     fi
 
     sudo cp "$temp_plan" "$netplan_file"
@@ -224,22 +298,30 @@ WATCHEOF
     netplan_log=$(mktemp)
     if sudo netplan apply > "$netplan_log" 2>&1; then
         cat "$netplan_log"
-        sleep 10
+        echo "Waiting for $wifi_iface to connect (up to 30 seconds)..."
-        local new_ip
+        local _
-        new_ip=$(get_ip_address)
+        for _ in {1..30}; do
-        if [[ -n "$new_ip" && "$new_ip" != "No IP" ]]; then
+            wifi_iface_has_ip "$wifi_iface" && break
-            log_success "Connected: $ssid ($new_ip)"
+            sleep 1
+        done
+        if wifi_iface_has_ip "$wifi_iface"; then
+            log_success "Connected to $ssid: $(wifi_iface_ip "$wifi_iface")"
             [[ -n "${SSH_CONNECTION:-}" ]] && echo "Connection successful - watchdog will not revert"
         else
-            log_warning "Config applied but no IP yet"
+            log_warning "Config applied but $wifi_iface has no address yet"
-            echo "Check: sudo journalctl -u systemd-networkd -f"
+            echo "Wrong password or network name is the usual cause. Details:"
+            echo "  sudo journalctl -b -u 'netplan-wpa-*' -u systemd-networkd -n 30 --no-pager"
         fi
     else
         log_error "netplan apply failed"
         echo "Error log:"
         cat "$netplan_log"
-        if [[ -n "$backup" ]] && ask_yes_no "Restore backup?" "y"; then
+        if ask_yes_no "Undo this WiFi change?" "y"; then
+            if [[ -n "$backup" ]]; then
                 sudo cp "$backup" "$netplan_file"
+            else
+                sudo rm -f "$netplan_file"
+            fi
             # Last resort after everything else failed: report, don't crash
             # the session if even the restore-and-reapply doesn't work.
             if sudo netplan apply; then