Claude
ff0711b927
- scripts/build-bay-map.sh: maps physical drive bays to /dev/disk/by-id paths - scripts/gpu-passthrough-setup.sh: configures IOMMU + vfio-pci for two Quadro P2200s - scripts/fan-control.sh: ipmitool daemon to prevent iDRAC from running fans at 100% due to non-Dell PCIe cards; adjusts speed by inlet temperature - scripts/fan-control.service: systemd unit for fan-control.sh https://claude.ai/code/session_01TxTSnxDjgEVuNztdsWQjMD
55 lines
1.9 KiB
Bash
Executable File
55 lines
1.9 KiB
Bash
Executable File
#!/usr/bin/env bash
|
|
# Map physical drive bays to stable /dev/disk/by-id paths.
|
|
# Run on the Proxmox host after perc-nonraid.sh and a reboot.
|
|
# Output is a table you can paste into docs/hardware-layout.md.
|
|
#
|
|
# Requires: lsscsi, ledmon (apt install lsscsi ledmon)
|
|
# Optional: perccli for enclosure/slot info
|
|
|
|
set -euo pipefail
|
|
|
|
for cmd in lsscsi; do
|
|
command -v "$cmd" &>/dev/null || { echo "Missing: $cmd — run: apt install $cmd"; exit 1; }
|
|
done
|
|
|
|
echo "=== Drive inventory ==="
|
|
echo ""
|
|
printf "%-12s %-10s %-30s %-20s %s\n" "DEVICE" "SIZE" "MODEL" "SERIAL" "BY-ID PATH"
|
|
printf "%-12s %-10s %-30s %-20s %s\n" "------" "----" "-----" "------" "---------"
|
|
|
|
for dev in /dev/sd?; do
|
|
[[ -b "$dev" ]] || continue
|
|
|
|
size=$(lsblk -dn -o SIZE "$dev" 2>/dev/null || echo "?")
|
|
model=$(cat "/sys/block/$(basename "$dev")/device/model" 2>/dev/null | tr -d ' ' || echo "?")
|
|
serial=$(cat "/sys/block/$(basename "$dev")/device/serial" 2>/dev/null | tr -d ' ' || echo "?")
|
|
|
|
# Prefer WWN-based by-id, fall back to scsi- or ata-
|
|
byid=$(ls -1 /dev/disk/by-id/ 2>/dev/null \
|
|
| grep -v "\-part" \
|
|
| while read -r link; do
|
|
target=$(readlink -f "/dev/disk/by-id/$link")
|
|
[[ "$target" == "$dev" ]] && echo "$link" && break
|
|
done | head -1 || echo "not found")
|
|
|
|
printf "%-12s %-10s %-30s %-20s %s\n" "$dev" "$size" "$model" "$serial" "/dev/disk/by-id/$byid"
|
|
done
|
|
|
|
echo ""
|
|
echo "=== Bay identification via LED blink ==="
|
|
echo ""
|
|
echo "To confirm which physical bay a device is in, blink its LED:"
|
|
echo " apt install ledmon"
|
|
echo " ledctl locate=/dev/sdX # LED on"
|
|
echo " ledctl locate_off=/dev/sdX # LED off"
|
|
echo ""
|
|
|
|
if command -v perccli &>/dev/null || command -v perccli64 &>/dev/null; then
|
|
PERCCLI=$(command -v perccli || command -v perccli64)
|
|
echo "=== PERC slot info ==="
|
|
$PERCCLI /c0 /eall /sall show | grep -E "^[0-9]|Drive's position|SN|WWN" || true
|
|
fi
|
|
|
|
echo ""
|
|
echo "Copy the BY-ID paths into docs/hardware-layout.md."
|