# Proxmox VM 100 — Frigate NVR
#
# Copy to /etc/pve/qemu-server/100.conf after filling in:
#   - hostpci0: real PCI address from gpu-passthrough-setup.sh output
#   - scsi1–scsi8: real /dev/disk/by-id paths from build-bay-map.sh output
#   - net0: real MAC (Proxmox generates one; leave it if creating via UI)
#
# Requirements on the Proxmox host before starting this VM:
#   1. scripts/perc-nonraid.sh — drives in non-RAID mode
#   2. scripts/gpu-passthrough-setup.sh — IOMMU + vfio-pci active, host rebooted
#   3. Coral USB plugged in

agent: 1
bios: ovmf
boot: order=scsi0
cores: 8
cpu: host
machine: q35
memory: 16384
name: frigate
numa: 0
ostype: l26
scsihw: virtio-scsi-single
sockets: 1

# OS disk — on Proxmox local storage, adjust pool name as needed
scsi0: local-lvm:vm-100-disk-0,cache=writeback,size=64G

# Data drives — bays 1–8, raw disk passthrough
# Fill in by-id paths from build-bay-map.sh
scsi1: /dev/disk/by-id/PLACEHOLDER_BAY1,size=0
scsi2: /dev/disk/by-id/PLACEHOLDER_BAY2,size=0
scsi3: /dev/disk/by-id/PLACEHOLDER_BAY3,size=0
scsi4: /dev/disk/by-id/PLACEHOLDER_BAY4,size=0
scsi5: /dev/disk/by-id/PLACEHOLDER_BAY5,size=0
scsi6: /dev/disk/by-id/PLACEHOLDER_BAY6,size=0
scsi7: /dev/disk/by-id/PLACEHOLDER_BAY7,size=0
scsi8: /dev/disk/by-id/PLACEHOLDER_BAY8,size=0

# Quadro P2200 #1 — GPU passthrough
# Replace XX:00 with real PCI address (e.g. 03:00)
# pcie=1 uses PCIe bus; x-vga=1 passes primary display output
# Proxmox auto-includes the HDMI audio sibling (XX:00.1)
hostpci0: 0000:XX:00,pcie=1,x-vga=1

# Google Coral USB — pass both VID:PID values
# Coral re-enumerates after first inference load: 1a6e:089a → 18d1:9302
usb0: host=1a6e:089a
usb1: host=18d1:9302

# Network
net0: virtio=BC:24:11:00:00:64,bridge=vmbr0,firewall=1

# EFI disk (required for OVMF/UEFI boot with q35 machine)
efidisk0: local-lvm:vm-100-disk-1,efitype=4m,pre-enrolled-keys=0,size=4M